SMT, PCB Electronics Assembly Manufacturing Industry News
Stay informed with latest electronics manufacturing news added by SMTnet members.
- SMTnet
- »
- SMT, PCB Electronics Manufacturing & Assembly Industry News
22219 SMT / PCB Assembly Industry News Releases
IPC News: 445 Companies to Exhibit New Equipment, Technologies and Materials at IPC APEX EXPO 2015
Feb 08, 2015 | Each year, IPC APEX EXPO brings the electronics manufacturing industry together to participate in North America’s largest technical conference and exhibition. One of the most anticipated features at the show is the New Products Corridor. This year’s show will feature 342 new products from 445 companies.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
Modular Microliter Pump for Small Flow Rates. Convey a Variety of Fluids at Rates of 5μl to 3ml/min.
Feb 06, 2015 | DNE microtechnology and 2E mechatronic have developed a new pump system for conveying a wide variety of fluids. It combines all the benefits of different pumps, such as diaphragm, piston injection and peristaltic pumps. The aim was to develop a reliable pump with an exchangeable fluid impelling part which, due to its modular construction, is capable of conveying a variety of fluids in parallel. The new pump system meets these demands.
2E Syscom supplies connectors for electronic manufacturing. Our connectors are used in Medical Electronics, Transportation an
Framingham, Massachusetts, USA
Pickering Interfaces Introduces Two New PCI and PXI Programmable Resistors
Feb 06, 2015 | Pickering Interfaces is expanding its range of PCI and PXI Programmable Resistors with the introduction of two new Programmable Resistor & Relay solutions.
Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.
Essex, United Kingdom
Aegis Software to Demonstrate FactoryLogix Manufacturing Operations Solution to Aerospace Industry at Aerocon 2015 in Anaheim CA.
Feb 06, 2015 | Aegis Software will demonstrate their FactoryLogix manufacturing operations solution at booth 4143 during the Aerocon show in Anaheim from February 10th to 12th. Visitors to the booth will see how FactoryLogix enables aerospace manufacturers to increase capacity while delivering complex, high-precision, configured-to-order assemblies with extremely low defects.
Aegis Industrial Software Corporation
Developers of State-of-the-Art Manufacturing Enterprise Automation Software
Horsham, Pennsylvania, USA
Data I/O to Show PSV7000 Automated Programming System at APEX
Feb 06, 2015 | Data I/O Corporation announced today that it will feature the PSV7000 automated programming system in Booth #2839 at the IPC APEX EXPO, scheduled to take place February 24-26, 2015 at the San Diego Convention Center in San Diego.
Data I/O is the world's leading provider of manual and automated programming solutions for semiconductor (IC) devices. Data I/O's solutions, software and programming engine ensures devices are programmed correctly every time.
Redmond, Washington, USA
MIRTEC Europe Tops Charts with Sixth Year-on-Year Growth and 75 Percent Increase in 2014
Feb 06, 2015 | MIRTEC, “The Global Leader in Inspection Technology,” is pleased to announce a remarkable increase in sales revenue growth for the past six consecutive years. Additionally, the company achieved a 75 percent increase – a company record – In 2014.
MIRTEC has earned a solid reputation as one of the most Progressive and Dynamic Suppliers of Automated SMT Inspection Equipment to the Electronics Manufacturing Industry.
Oxford, Connecticut, USA
Innodisk Gives Sneak Peek of New Industrial Flash Products at Embedded World 2015
Feb 06, 2015 | New eMMC card, SATA Express and PCIe products as well as vertical market solutions will be displayed and demoed at annual embedded system trade fair
Innodisk Corporation is an industry-leading manufacturer and solution provider of flash storage devices and DRAM modules for industrial applications and embedded systems.
New Taipei City, Taiwan
Umut Tosun, Application Technology Manager, ZESTRON, to present at IPC APEX Expo 2015
Feb 05, 2015 | ZESTRON is pleased to announce that Umut Tosun, M.S.Chem.Eng., Application Technology Manager, ZESTRON, will present “pH neutral Cleaning Agents – Market Expectation & Field Performance“ at the 2015 IPC APEX EXPO in San Diego, CA. The conference and exhibition will be held from February 24th to February 26th.
The globally leading provider of high precision cleaning products, services and training solutions in the electronics and semiconductor manufacturing industries.
Manassas, Virginia, USA
Consultant / Service Provider, Manufacturer, Training Provider
What You Will Learn from A-Laser MID Tech Day
Feb 04, 2015 | A-Laser is pleased to announce that its MID Tech Day is only two weeks away. The FREE event will be held at the A-Laser facility in Milpitas, CA on Thursday, Feb. 19, 2015. Industry experts will be on site to discuss various topics and the endless possibilities of Molded Interconnect Devices (MIDs).
Custom laser cutting services and precision parts manufacturing.
Milpitas, California, USA
The SMTA Capital Chapter to Host First Meeting of the Year on March 17th at EIT
Feb 04, 2015 | he SMTA Capital Chapter is pleased to announce its first meeting of 2015 on March 17th, scheduled from 5:30 pm to 8:00 pm at EIT (Main Building Lunchroom), 108 Carpenter Drive, Sterling, VA 20164. The focus of this chapter meeting will be “Elimination of Pb-Free Risk by Robotic Hot Solder Dip (RHSD)” presented by Donald Tyler, Managing Director, Corfin Industries.
Surface Mount Technology Association (SMTA)
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Eden Prairie, Minnesota, USA
Association / Non-Profit, Events Organizer, Training Provider
Computrol Will Discuss High-Mix Manufacturing Services at AmCon
Feb 04, 2015 | Computrol will exhibit in Booth #204 at AmCon, scheduled to take place March 24-25, 2015 at the Meydenbauer Center in Bellevue, WA. Computrol representatives will discuss high-mix electronic manufacturing and lot traceability capabilities.
Computrol, Inc. is a national leader in low to medium volume, high mix contract manufacturer of electronic assemblies. We specialize in customer service, quality and on time delivery. We have 3 locations in the United States.
Meridian, Idaho, USA
Vi TECHNOLOGY to Participate in PCB Manufacturing Process Workshop in NY
Feb 04, 2015 | Vi TECHNOLOGY will participate in the PCB manufacturing processes workshop, scheduled to take place April 21-23, 2015 at the Kintner Equipment Corp. facility in Endicott, New York. ACE Production Technologies, Inc. has partnered with Kintner Equipment Corp. to conduct the free workshop.
Vi TECHNOLOGY is a worldwide global supplier of a wide range of innovative Automated Inspection AOI, 3D-SPI equipment and software solutions that provide real time data collection and correlation across the SMT line.
Richardson, Texas, USA
CyberOptics to Demonstrate the New SQ3000 3D AOI with Multi-Reflection Suppression Technology Inside
Feb 04, 2015 | CyberOptics® Corporation announces that it will demonstrate the new SQ3000™ 3D Automated Optical Inspection (AOI) system in Booth #3332 at the IPC APEX EXPO, Feb. 24-26, 2015 at the San Diego Convention Center in California.
CYBEROPTICS is a global leader in high-precision 3D sensors that significantly improve yields and productivity in the 3D scanning and metrology, Surface Mount Technology & Semiconductor Markets
Minneapolis, Minnesota, USA
Count On Tools Inc. Expands Panasonic Nozzles for NPM Equipment
Feb 04, 2015 | Count On Tools announces that it now offers a complete line of nozzles for the Panasonic NPM machines. These nozzle designs enable highly accurate, repeatable, optimized chip placement. The NPM Series equipment optimizes the latest technologies into a lean modular solution for changing, expanding and evolving electronic assembly needs.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
Gainesville, Georgia, USA
IPC President and CEO John Mitchell Releases Statement on President Obama’s FY16 Budget
Feb 04, 2015 | On Monday, President Obama released his Fiscal Year 2016 Budget of the U.S. Government. Included in the budget is funding to expand the National Network of Manufacturing Innovation (NNMI) as well as a 5.5 percent increase from 2015 of $146 billion for research and development (R&D) initiatives. “IPC applauds the President for his commitment to grow advanced manufacturing and increase federal R&D investment, both of which are a critical part of IPC’s Global Policy Framework for 2015,” said John Mitchell, IPC President and CEO.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
Kinetic Bootie Butler Now Available
Feb 04, 2015 | Blue Thunder Technologies, a distributor and manufacturer of supplies for cleanroom and industrial applications has been announced as a North American distributor of the Bootie Butler Automatic Shoe Cover Dispenser.
Blue Thunder Technologies, Inc.
Blue Thunder Technologies manufactures a wide variety of wiping products and can supply virtually any type of consumable item used in cleanrooms, assembly lines, laboratories, and manufacturing.
Enfield, Connecticut, USA
DDM Novastar Announces Expanded Service & Support
Feb 04, 2015 | DDM Novastar has expanded its service and support staffing to provide quicker response times and more direct focus on service requests, troubleshooting, field service, application assistance, parts identification, and customer training.
Turnkey SMT assembly solutions, manual & automated stencil printers, manual & automatic pick & place systems with dispensers, wave solder & selective solder machines, lead free solder reflow ovens, component counters, & thru-hole
Ivyland, Pennsylvania, USA
Panasonic: Innovative Solutions for Any Mix Any Volume Manufacturing at APEX
Feb 03, 2015 | Panasonic Factory Solutions Company of America will premiere new hardware, application, and software solutions that amplify the depth and breadth of their total solutions for “Any Mix Any Volume” in booth 3539 at IPC APEX 2015.
Panasonic Factory Solutions Company of America (PFSA)
PFSA develops and supports innovative manufacturing automation equipment, processes and solutions around the core of electronic assembly, microelectronic, software and circuit manufacturing
Rolling Meadows, Illinois, USA
RPS to Host Originals and New Comers at the 2015 IPC APEX Exhibition
Feb 03, 2015 | RPS Automation LLC has made plans to display four systems from their Selective Soldering line at the upcoming IPC APEX EXPO in San Diego, February 24-26. This display will introduce exhibition attendees to the classic systems that put RPS Automation on the map, as well as the new, economical machines that are expanding their product offering capabilities.
Hentec Industries, Inc. (RPS Automation)
Hentec Industries, Inc. designs and manufacturers high quality precision machines for use in selective soldering, lead tinning, and solderability testing applications.
Newman Lake, Washington, USA
SCS Releases New Ionograph® Contamination Test Systems
Feb 02, 2015 | Specialty Coating Systems (SCS) introduces the new Ionograph® SMD V and Ionograph® BT Series (bench top) contamination test systems. The redesigned SCS Ionograph SMD V is the latest in SCS’s line of ionic contamination test systems and the SCS Ionograph BT Series is a redesign of the current I500M Benchtop Ionographs.
For over 40 years, Specialty Coating Systems has provided high quality Parylene conformal coating services and expertise to the medical device, electronics, automotive and military/aerospace industries.
Indianapolis, Indiana, USA
Saline Lectronics Hires Jeff Riedel, Lean Champion, to Implement an Innovative Lean Culture
Feb 02, 2015 | Saline Lectronics announces the addition of Jeff Riedel as Lean Champion to its manufacturing team. Saline Lectronics’ commitment to the implementation of a lean culture will allow the company to maintain current growth trajectories and make holistic process efficiency improvements.
An electronic manufacturing services and solutions provider. Capabilities include BGA, Micro-BGA, Surface Mount or Through-Hole Technology assembly.
Saline, Michigan, USA
Torenko and Associates Signs on Its 75th SMT Account in Mexico
Feb 02, 2015 | Torenko and Associate announces that it has signed on its 75th Mexican national account for SMT equipment.
A leading manufacturer’s representative organization specializing in the sales and marketing of premiere electronic assembly equipment, production tools, test, inspection, and consumable products.
Sunnyvale, Texas, USA
Gen3 Systems to Exhibit New SIR and CAF Systems with Ascentech LLC at the IPC APEX EXPO
Feb 02, 2015 | Gen3 Systems Limited today announced that it will exhibit at the IPC APEX EXPO alongside its North American Distributor Ascentech LLC. Gen3 Systems will be present on Booth #1028 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center, San Diego, and will introduce new and improved products for electronics manufacturing at the trade show.
Gen3 Systems is a specialist manufacturer of test and measurement equipment used to help predict reliability of electronic circuits and systems in the field.
Farnborough Hampshire, United Kingdom
SolderStar Announce a New Sales and Support Partner in Spain
Feb 01, 2015 | SolderStar has announced the appointment of Nufesa Electronics as a new sales and support partner for Spain.
SolderStar produce thermal profiler solutions for reflow soldering, selective solder machine profiling and wave solder optimization.
Clearwater, USA
Vi TECHNOLOGY Appoints Business Development Manager in Europe
Feb 01, 2015 | Vi TECHNOLOGY announces that it has appointed a new Business Development Manager for Eastern Europe. Krisztián Kern will provide full sales support for Vi TECHNOLOGY’s customers in his respective territory.
Vi TECHNOLOGY is a worldwide global supplier of a wide range of innovative Automated Inspection AOI, 3D-SPI equipment and software solutions that provide real time data collection and correlation across the SMT line.
Richardson, Texas, USA
Cogiscan Partners with InterLatin to bring TTC Solutions to Mexico
Feb 01, 2015 | Cogiscan announces that it has teamed with InterLatin to provide and support TTC Solutions throughout Mexico.
Cogiscan provides factory-wide electronics manufacturing traceability (TTC), MSD control, component set up verification, PCB assembly error-proofing, components inventory management.
Bromont, Quebec, Canada
FCT’s Stencil Division Commemorates 20-Year Milestone
Jan 29, 2015 | FCT Assembly is pleased to announce the 20th anniversary of the Fine Line Stencil division. Shortly after FCT Assembly was established in 2004, Fine Line Stencil was acquired.
With numerous facilities in the United States, we are one of the electronics industry's leading manufacturers of lead-free solder products, superior quality stencils, and precision cut parts.
Greeley, Colorado, USA
Kintner Equipment to Represent Speedprint in New York
Jan 29, 2015 | Speedprint Technology announces the appointment of Kintner Equipment Corporation as its manufacturers’ representative. Walter Kintner will represent Speedprint’s leading-edge stencil print technology throughout New York.
Speedprint Technology is an award-winning company delivering comprehensive printing solutions with a focus on value, flexibility and low cost-of-ownership for the SMT and Semiconductor industries.
Dorset, United Kingdom
Pickering Interfaces Introduces Two New PCI and PXI Programmable Resistors
Jan 29, 2015 | Pickering Interfaces is expanding its range of PCI and PXI Programmable Resistors with the introduction of two new Programmable Resistor & Relay solutions.
Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.
Essex, United Kingdom
Mydata, Universal, DEK & Other Manufacturing Equipment In PA Up For Sale
Jan 28, 2015 | Baja Bid will be selling some electronic manufacturing equipment from one of their good customers in Horsham, Pennsylvania. The equipment is currently in production but is scheduled to be taken off-line in March of this year. There is no auction being planned at this time but sales orders are being taken with a release date during the month of March.
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Odessa, Florida, USA
Universal Holder System for Ekra Serio Retrofit
Jan 28, 2015 | Transition Automation announces the availability of Permalex Universal Holder and Blade Assemblies for installation on Ekra Serio printing systems.
Transition Automation is a pioneering company which develops and sells advanced Permalex Edge Metal Squeegees for SMT printing, and also precision SMT printing systems.
Tyngsboro, Massachusetts, USA
Universal Holder System for Ekra Serio Retrofit
Jan 28, 2015 | Transition Automation, Inc., announces the availability of Permalex Universal Holder and Blade Assemblies for installation on Ekra Serio printing systems. The new adaptor system is compatible with the quick install system used in this in-line printer system. User’s who wish to employ the Permalex Edge metal squeegees for long life SMT printing may now do so on this platform. The part number is: PLX-EKR-U-xx-PR, and is in stock for immediate delivery. These holders feature sliding paste retainers, optional spring loaded paste retainers, and long life Polymer infused Permalex blades.
Transition Automation is a pioneering company which develops and sells advanced Permalex Edge Metal Squeegees for SMT printing, and also precision SMT printing systems.
Tyngsboro, Massachusetts, USA
Join Metcal’s UK Team at Southern Manufacturing
Jan 28, 2015 | Metcal today announced plans to exhibit in the Solder Connection Stand B80 at Southern Manufacturing & Electronics, scheduled to take place Feb. 10-12, 2015 in Farnborough, Hampshire.
Manufacturer of high-performance precision rework systems for the electronics bench. Product lines include: Hand Soldering and Desoldering, Convection Rework products, Fume Extraction and Fluid Dispensing tools.
Cypress, California, USA
GEN3 Systems to Showcase MEK’s In-Line Bottom Side PCB Inspection at Southern Manufacturing & Electronics - Stand L28
Jan 28, 2015 | Gen3 Systems will showcase MEK’s (Marantz Business Electronics) SpectorBOX “Bottom-Up” 3D Modular AOI system at Southern Manufacturing & Electronics, FIVE, Farnborough February 10-12, 2015. The system replaces traditional board flipping alternatives in less space and at a lower cost.
Gen3 Systems is a specialist manufacturer of test and measurement equipment used to help predict reliability of electronic circuits and systems in the field.
Farnborough Hampshire, United Kingdom
Pacific X-ray Imaging (PXI) announces a new release version and direct sales of their PXi-Pro X-ray Image Analysis Processors and field upgrade kits
Jan 28, 2015 | Pacific X-ray Imaging, a San Diego based supplier of Industrial X-ray Imaging systems and components, announced today a new and improved version of their PXi-Pro X-Ray Image Analysis Processing software.
Design, manufacture, refurbish, service and support of x-ray inspection equipment.
San Diego, California, USA
Yamaha to Showcase the Sigma™ Series Mounter Platform at APEX 2015
Jan 28, 2015 | Yamaha Motor Co. is finalizing an aggressive transition plan to incorporate the Hitachi Sigma Mounter Platform into their already extensive portfolio of SMT Mounters, Printers, Dispensers, Hybrid Placers and Inspection / X-Ray Machines. This follows the announcement in September 2014 whereby Hitachi High-Technologies Corporation (TOKYO: 8036; Hitachi High-Tech) resolved to withdraw from the chip mounter business, and concluded a contract to partially transfer assets related to the surface mounter business to Yamaha.
Yamaha Motor IM America offers Single and Dual Lane production Printers, Mounters and AOI.
Kennesaw, Georgia, USA
MicroCare Corp. Highlights ‘Green’ Cleaning Innovations at IPC APEX EXPO
Jan 27, 2015 | MicroCare Corporation is introducing its newest range of electronics cleaners and cost-saving SMT production aids at IPC APEX EXPO, Booth #2733, in San Diego CA from 24-26 February.
1.jpg)
The leading supplier of cleaners and lubricants for critical environments.
New Britain, Connecticut, USA
Speedprint Kicks Off the New Year with a New Rep in the Midwest
Jan 27, 2015 | Speedprint Technology announces the appointment of Production Automation Corporation (PAC) as its manufacturers’ representative. Steve Block, Marshall Canaday and Curt Anderson will represent Speedprint’s leading-edge stencil print technology in Minnesota, North and South Dakota, Iowa and Western WI.
Speedprint Technology is an award-winning company delivering comprehensive printing solutions with a focus on value, flexibility and low cost-of-ownership for the SMT and Semiconductor industries.
Dorset, United Kingdom
IPC Releases Global Public Policy Framework for 2015; Announces Dates for “IMPACT 2015: IPC ON CAPITOL HILL”
Jan 27, 2015 | The world’s leading advocate for the electronics industry today released its Global Policy Framework for 2015, outlining its top public policy priorities to promote a strong manufacturing economy.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
HyperLynx Alliance Accelerates High-Speed Design-Ins and Verification
Jan 27, 2015 | Mentor Graphics and Key Industry Partners Align Analysis Tools, Methodologies, Models, and Reference Designs.
A leader in software solutions for electroncs design, Mentor Graphics is the only EDA company with a total end-to-end solution for design though manufacturing.
Wilsonville, Oregon, USA
Altus Group Demonstrates its Newest Portfolio Additions at the Southern Manufacturing and Electronics Exhibition
Jan 27, 2015 | Altus Group will be introducing a number of new portfolio additions to visitors at the Southern Manufacturing and Electronics exhibition in Farnborough from 10 – 12 February.
The Altus Group is one of the fastest growing distribution companies in east Central Europe. We have a seperate division that refurbishes second user equipment for the electronics industry using our reknowned customer support team.
Kirkcaldy, United Kingdom
MicroCare Europe Highlights ‘Green’ Cleaning Innovations at Enova For the First Time
Jan 27, 2015 | MicroCare Europe will be introducing its newest range of electronics and fibre optic cleaning tools for the first time at the Enova Expo in Toulouse, Stand E18, from 11-12 March 2015.
.jpg)
The leading supplier of cleaners and lubricants for critical environments.
New Britain, Connecticut, USA
SAMSUNG to Display Full Line of SMT Machines at APEX 2015
Jan 27, 2015 | SAMSUNG C&T Automation will exhibit in Booth #2317 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California.
SCTA develops and offers SMT assembly line solutions and machines for customers in North America. Samsung offers pick and place machines, screen printers, reflow ovens, accessory machines, and software products.
Irvine,
SCS Introduces the Precisioncoat V Conformal Coating System
Jan 27, 2015 | Specialty Coating Systems (SCS) introduces its new Precisioncoat V conformal coating system. The Precisioncoat V, available in conformal coating, dispensing and/or potting platforms, offers maximum flexibility and efficiency for manufacturers.
For over 40 years, Specialty Coating Systems has provided high quality Parylene conformal coating services and expertise to the medical device, electronics, automotive and military/aerospace industries.
Indianapolis, Indiana, USA
Pickering Interfaces Introduces New High-Density LXI Switching Matrix Modules
Jan 27, 2015 | Pickering Interfaces is expanding its range of LXI switching matrices with the introduction of new high-density matrix modules.
Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.
Essex, United Kingdom
Count On Tools Inc. to Launch INSTOCK Consignment Program for SMT Nozzles, Tooling and Consumables
Jan 27, 2015 | Count On Tools is launching an innovative program designed to give EMS companies on-demand access to high-quality SMT nozzles, tooling and consumables for more than 20 of the top pick-and-place equipment vendors. The INSTOCK Consignment Program has been developed to give EMS companies and contract manufacturers immediate access to project-critical products with no up-front inventory costs or risk of overstock.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
Gainesville, Georgia, USA
MacAllister and Associates Joins A-Laser’s Rep Team
Jan 27, 2015 | A-Laser is pleased to announce the addition of MacAllister and Associates to their group of representatives. MacAllister and Associates primarily focus on the northeast region of the country with main offices in the Greater Boston area. Additionally, the company provides coverage of the entire East Coast.
Custom laser cutting services and precision parts manufacturing.
Milpitas, California, USA
The Balver Zinn Group to Supply BRILLIANT B2012 Solder Wire for the APEX Hand Soldering Competition
Jan 27, 2015 | The Balver Zinn Group announces that Cobar Solder Products Inc. is sponsoring the fourth annual IPC APEX EXPO® Hand Soldering Competition, scheduled to take place Feb. 26, 2015 at the San Diego Convention Center in San Diego, CA. Cobar Solder Products is contributing Balver Zinn’s BRILLIANT B2012 SAC305 (SN97C) solder wire is halide-free, rosin-based and designed for manual and robotic soldering.
Manufacturer of solders, high-quality anodes, alloys and wires for the electronic industry and surface refinement applications. Lead free products for the electronic industry are one of the core competencies of the company.
Balve, Germany
Manufacturer, Standards Setting / Certification, Training Provider
Nihon Superior Announces Successful Product Launches at NEPCON Japan
Jan 27, 2015 | Nihon Superior recently exhibited at NEPCON Japan at the Tokyo Big Sight in Japan. The company had a successful show with high interest in its newly developed products and several new technologies.
Nihon has been a leader in soldering and brazing since 1966. Nihon manufactures SMT solder joining materials e.g. lead-free solder (SN100C:Sn-Cu-Ni-Ge etc): solder paste, solder spheres, flux cored solder wire, solder bar, etc.
Osaka, Japan
André Tailleur Joins Techcon Systems as Regional Sales Manager – Northern & Western Europe
Jan 27, 2015 | Techcon Systems is pleased to announce the addition of André Tailleur as Regional Sales Manager - Northern & Western Europe. André will cover the Northwestern territory for Techcon Systems, including the following regions: Scandinavia, UK, Ireland, France, Benelux, Spain, Portugal, North Africa, and Turkey.
Techcon offers a wide array of fluid dispensing products and provides dispensing components ranging from disposable accessories to complete microprocessor-controlled dispensing systems, and precision valves.
Cypress, California, USA
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445
