SMT, PCB Electronic Industry News

SMT, PCB Electronics Assembly Manufacturing Industry News

Stay informed with latest electronics manufacturing news added by SMTnet members.


  • SMTnet
  • »
  • SMT, PCB Electronics Manufacturing & Assembly Industry News

Add News »

21713 SMT / PCB Assembly Industry News Releases

Pickering Interfaces Introduces new High Density PXI RF Switches

Apr 20, 2011 | Pickering Interfaces is expanding its range of PXI RF switches with the introduction of the 40-755 multiplexer modules.

Pickering Interfaces Ltd.

Pickering Interfaces Ltd.

Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.

Essex, United Kingdom

Manufacturer

Highlighting the Strength and Depth of Chinese Electronics Manufacturing

Apr 20, 2011 | Both local and international electronics manufacturers are aware of the fact that to miss a NEPCON China event is to forego numerous exciting business opportunities. NEPCON China is a trusted barometer of the state of the electronics manufacturing industry in China and Asia.

Reed Exhibitions - RX (Reed Exhibitions)

Siemens: Smart SIPLACE DX

Reed Exhibitions - RX (Reed Exhibitions)

Reed Exhibitions is the world's leading events organiser, with a growing portfolio of more than 440 events in 36 countries, and a staff of over 2,500 exhibition specialists.

28 The Quadrant, United Kingdom

Events Organizer

Electronics Industry Volunteers Honored for Contributions to Industry and IPC

Apr 20, 2011 | IPC — Association Connecting Electronics Industries® presented Special Recognition, Distinguished Committee Leadership and Committee Service awards and a Presidents Award at IPC APEX EXPO™, held April 10–14, in Las Vegas.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association / Non-Profit, Events Organizer, Training Provider

Don Dupriest Inducted Into IPC Hall Of Fame

Apr 20, 2011 | In recognition of extraordinary contributions to IPC and the electronic interconnect industry, countless hours of volunteer service on IPC standards development committees and exceptional lifetime achievement, Don Dupriest, Lockheed Martin, was awarded the 2010 IPC Raymond E. Pritchard Hall of Fame Award. Presented at IPC APEX EXPO™ in Las Vegas, the Hall of Fame Award represents IPC’s highest level of member recognition.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association / Non-Profit, Events Organizer, Training Provider

IPC Honors TTM Technologies and Celestica with 2011 Corporate Recognition Awards

Apr 20, 2011 | IPC — Association Connecting Electronics Industries® bestowed its highest corporate honors to TTM Technologies and Celestica. During the IPC Annual Meeting Luncheon held in conjunction with IPC APEX EXPO™, IPC awarded the Stan Plzak Corporate Recognition Award to Celestica and the Peter Sarmanian Corporate Recognition Award to TTM Technologies.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association / Non-Profit, Events Organizer, Training Provider

IPC Honors Best Technical Papers At IPC Apex Expo 2011

Apr 20, 2011 | IPC – Association Connecting Electronics Industries® has announced the winners of this year's Best U.S. and International Papers at IPC APEX EXPO™, held April 12–14, 2011, in Las Vegas. The event's Technical Program Committee selected the winners through a ballot process.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association / Non-Profit, Events Organizer, Training Provider

IPC Elects New Members To Board Of Directors

Apr 20, 2011 | The Nominating and Governance Committee of the IPC Board of Directors presented one Board candidate for re-election and three new Board candidates for election at the IPC Annual Meeting, on Tuesday, April 12, 2011, in conjunction with IPC APEX EXPO™ in Las Vegas.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association / Non-Profit, Events Organizer, Training Provider

Learn About Kyzen’s Versatile METALNOX® Chemistries at METALFORM Mexico 2011

Apr 20, 2011 | Kyzen, a world leading provider of environmentally responsible precision cleaning products for electronics and high-technology manufacturing operations, will highlight its METALNOX® M6310 and M6319 in Booth #1522 at the upcoming METALFORM Mexico, scheduled to take place May 11-13, 2011 at the Cintermex in Monterrey, Mexico.

KYZEN Corporation

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Manufacturer

Learn About Kyzen’s Versatile METALNOX® Chemistries at METALFORM Mexico 2011

Apr 20, 2011 | Kyzen, a world leading provider of environmentally responsible precision cleaning products for electronics and high-technology manufacturing operations, will highlight its METALNOX® M6310 and M6319 in Booth #1522 at the upcoming METALFORM Mexico, scheduled to take place May 11-13, 2011 at the Cintermex in Monterrey, Mexico.

KYZEN Corporation

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Manufacturer

Kyzen Honored with Its Fourth NPI Award

Apr 20, 2011 | Kyzen announces that it has been awarded a 2011 NPI Award in the category of Cleaning Materials for its AQUANOX® A4705 Neutral pH Aqueous Cleaning Chemistry.

KYZEN Corporation

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Manufacturer

FCT Assembly's NL930PT Pin Probable Paste Wins a 2011 NPI Award

Apr 20, 2011 | FCT Assembly is pleased to announce that it has been awarded a 2011 NPI Award in the category of Soldering Materials for its NL930PT Pin Probable Solder Paste.

FCT ASSEMBLY, INC.

NL930PT paste features excellent solderability, enabling the process to handle the most difficult wetting requirements.

FCT ASSEMBLY, INC.

With numerous facilities in the United States, we are one of the electronics industry's leading manufacturers of lead-free solder products, superior quality stencils, and precision cut parts.

Greeley, Colorado, USA

Manufacturer

Europlacer Backs North American SMT Equipment Purchases with 5/2 Warranty

Apr 20, 2011 | Europlacer, a designer and manufacturer of comprehensive SMT placement systems for the global electronics industry, recently unveiled an extended five-year parts/two-year labor warranty on all pick-and-place machine orders in North America.

EUROPLACER

EUROPLACER

Europlacer designs and manufactures a comprehensive range of highly flexible SMT pick and place equipment for the global electronics industry, with a network of distributors across the globe.

Poole Dorset, United Kingdom

Manufacturer

ESSEMTEC Wins a 2011 NPI Award for Its Cobra SMT Assembler

Apr 20, 2011 | Essemtec announces that it has been awarded a 2011 NPI Award in the category of Component Placement – Multi-function for its Cobra. The award was presented to the company on a Tuesday, April 12, 2011 ceremony that took place at the Mandalay Bay Resort & Convention Center in Las Vegas during IPC APEX 2011.

ESSEMTEC AG

Cobra is the world’s most modern SMD pick-and-place machine and the first SMD pick-and-place system to combine the advantages of a highly flexible pick-and-place with the throughput of a multi-axes placer.

ESSEMTEC AG

Essemtec is a worldwide leader in manufacturing of highly flexible Surface Mount Technology (SMT) production equipment - pick-and-place system, dispenser, printer, oven, storage system and software Solutions.

aesch/LU, ZH, Switzerland

Manufacturer

CyberOptics' QX500™ Honored with a 2011 NPI Award

Apr 20, 2011 | CyberOptics Corporation announces that it has been awarded a 2011 NPI Award in the category of Test and Inspection – AOI for its QX500™ AOI System.

CyberOptics Corporation

CyberOptics’ innovative QX500™ AOI system is designed with a unique image acquisition solution – Strobed Inspection Module (SIM).

CyberOptics Corporation

CYBEROPTICS is a global leader in high-precision 3D sensors that significantly improve yields and productivity in the 3D scanning and metrology, Surface Mount Technology & Semiconductor Markets

Minneapolis, Minnesota, USA

Manufacturer

Count On Tools LED Nozzle Series Wins Coveted Industry Award

Apr 20, 2011 | Count On Tools Inc. announces that it has been awarded a 2011 NPI Award in the category of Automation Tools for its LED Nozzle Series. The award was presented to the company during a Tuesday, April 12, 2011 ceremony that took place at the Mandalay Bay Resort & Convention Center in Las Vegas during IPC APEX 2011.

Count On Tools, Inc.

LED Nozzle Series

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer

KIC’s MVP Profile Fixture – The "Manual KIC 24/7" – Wins Its Second Industry Award

Apr 20, 2011 | KIC, the leader of thermal process development and control products, and winner of multiple industry awards, announces that it has been awarded a 2011 NPI Award in the category of Process Control Tools for its MVP Profile Fixture, otherwise known as the "Manual KIC 24/7."

KIC Thermal

The MVP profile fixture is ideal for viewing changes in reflow ovens and determining how those changes affect the profile of production boards.

KIC Thermal

KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.

San Diego, California, USA

Consultant / Service Provider

KIC’s Marybeth (MB) Allen Returns to US as Product Manager

Apr 20, 2011 | KIC announces that Marybeth (MB) Allen has returned to the United States to take on the role of Product Manager.

KIC Thermal

Marybeth (MB) Allen, KIC' new Product Manager.

KIC Thermal

KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.

San Diego, California, USA

Consultant / Service Provider

KIC Promotes Profiling Guru Brian O’Leary to GM of International Sales

Apr 20, 2011 | KIC, the leader of thermal process development and control products, and winner of multiple industry awards, has promoted Brian O’Leary to General Manager of International Sales.

KIC Thermal

Brian O’Leary, KIC’s Sales Manager — Americas and Trevor Galbraight, Publisher/Editor-in-Chief at Global SMT & Packaging

KIC Thermal

KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.

San Diego, California, USA

Consultant / Service Provider

Juki Wins Its 8th NPI Award

Apr 20, 2011 | Juki Corporation, a world-leading provider of automated assembly products and systems, announces that it has been awarded a 2011 NPI Award in the category of Soldering – Selective for its FlexSolderWave FSW620-EF. The award was presented to the company during a Tuesday, April 12, 2011 ceremony that took place at the Mandalay Bay Resort & Convention Center in Las Vegas during IPC APEX 2011.

Juki Automation Systems

The FSW620-EF is a traditional mini-wave soldering system capable of supporting board sizes up to 20

Juki Automation Systems

Juki Automation Systems Inc. is one of the worlds leading SMT placement companies with over 45,000 machines installed worldwide and is the pioneer of the modular automated assembly line. see www.jukiamericas.com for more info.

Morrisville , North Carolina, USA

Manufacturer

STI Electronics’ Mel Parrish Receives the IPC Distinguished Committee Service Award at IPC APEX 2011

Apr 20, 2011 | STI Electronics, Inc. announces that Mel Parrish, FSO/Director of Training Materials, has been awarded an IPC Distinguished Committee Service Award.

STI Electronics

Mel Parrish, FSO/Director of Training Materials for STI Electronics, Inc.

STI Electronics

Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry.

Madison, Alabama, USA

Consultant / Service Provider, Manufacturer, Standards Setting / Certification, Training Provider

Seika Selects Kirby & Demarest as a Top McDry Sales Representative in 2010

Apr 20, 2011 | Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, awarded Kirby & Demarest third place for being one of its top McDry sales representatives in 2010. The award was presented to the company during a Wednesday, April 13, 2011 ceremony that took place at the Mandalay Bay Resort & Convention Center in Las Vegas during the 2011 IPC APEX EXPO.

Seika Machinery, Inc.

Alan Siebenthall and Steve Kirby of Kirby & Demarest

Seika Machinery, Inc.

Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products

Torrance, California, USA

Distributor, Manufacturer

SEHO Wins Patent Lawsuit Against Ersa in First Instance

Apr 20, 2011 | SEHO Systems GmbH, one of the worldwide leading manufacturers of automated soldering systems and customer-specific solutions, has won a patent dispute against market competitor Ersa GmbH at the court of first instance. Ersa appealed against the judgement.

SEHO Systems GmbH

SEHO Systems GmbH

The SEHO brand stands for innovative systems for all fields of automated soldering processes, solutions for THT-AOI, customized automation technology and know how. Our customers profit from complete solutions that perfectly match.

Kreuzwertheim,

Manufacturer

SEHO Systems to Present a One-Day Wave Soldering Seminar

Apr 20, 2011 | SEHO North America, Inc. announces a one-day Wave Soldering Seminar from the SEHO Academy presented by Dr. Ronny Horn, and scheduled to take place Tuesday, June 28 or Thursday, June 30, 2011 at the company’s facility in Erlanger, KY.

SEHO Systems GmbH

Dr. Ronny Horn.

SEHO Systems GmbH

The SEHO brand stands for innovative systems for all fields of automated soldering processes, solutions for THT-AOI, customized automation technology and know how. Our customers profit from complete solutions that perfectly match.

Kreuzwertheim,

Manufacturer

EVS International to Exhibit its Lead Free EVS 7000 System at NEPCON China 2011

Apr 20, 2011 | EVS International, the World Leader in solder recovery, announces that it will exhibit its EVS 7000LFHS in distributor SIP Technologies booth #1B12B, at the upcoming NEPCON China 2011, scheduled to take place May 11-13, 2011 in Shanghai, China.

EVS International

With its unique simplicity of operation and high recovery rates, EVS 7000LFHS Solder Recovery System provides fast payback and pure solder quality.

EVS International

World Leaders in Solder Recovery.

Cowes, United Kingdom

Consultant / Service Provider, Manufacturer

Get Ready for Production Solutions’ New RED-E-SET SZ GO! Board Support

Apr 20, 2011 | Production Solutions Inc. introduces the RED-E-SET SZ GO!, the latest in its family of board supports. The company combined its RED-E-SET GO! with its RED-E-SET SZ Center Support, resulting in this new, revolutionary board support.

Production Solutions

Production Solutions’ GO! is a cost-effective board support tooling solution designed for applications that do not require rigid fixed height support.

Production Solutions

Production Solutions, Inc., manufacturer of the RED-E-SET Universal Board Support System for all Printers and Chipshooter, Dispensers and Placement machines.

Poway, California, USA

Manufacturer

Nihon Superior's SN100C (044) Honored with a 2011 NPI Award

Apr 20, 2011 | Nihon Superior Co. Ltd. has been awarded a 2011 NPI Award in the category of Cored Wire for its SN100C (044) Flux-Cored Solder Wire.

Nihon Superior Co., Ltd.

SN100C (044) completely halogen-free high performance  flux-cored solder wire.

Nihon Superior Co., Ltd.

Nihon has been a leader in soldering and brazing since 1966. Nihon manufactures SMT solder joining materials e.g. lead-free solder (SN100C:Sn-Cu-Ni-Ge etc): solder paste, solder spheres, flux cored solder wire, solder bar, etc.

Osaka, Japan

Manufacturer

Nihon Superior’s NS-F900 Flux Wins Its Second Industry Award

Apr 20, 2011 | Nihon Superior Co. Ltd. announces that it has been awarded a 2011 NPI Award in the category of Flux for its NS-F900 Halogen-free Flux for Wave Soldering. The award was presented to the company during a Tuesday, April 12, 2011 ceremony that took place at the Mandalay Bay Resort & Convention Center in Las Vegas during IPC APEX 2011.

Nihon Superior Co., Ltd.

NS-F900 is a robust, heat resistant, no-clean, rosin-based wave soldering flux that is completely halogen-free.

Nihon Superior Co., Ltd.

Nihon has been a leader in soldering and brazing since 1966. Nihon manufactures SMT solder joining materials e.g. lead-free solder (SN100C:Sn-Cu-Ni-Ge etc): solder paste, solder spheres, flux cored solder wire, solder bar, etc.

Osaka, Japan

Manufacturer

Proven Best Cost of Test: Multitest’s ECON® Contactor Exceeds 4.5 mio Insertions

Apr 20, 2011 | Multitest announces that its well-established ECON® contactor once again has proven its superior cost of test. The contactor recently exceeded 4.5 mio insertions at an Asian test house.

Multitest Elektronische Systeme GmbH

Multitest ECON® socket

Multitest Elektronische Systeme GmbH

Multitest is one of the world´s leading manufacturers of semiconductor material handling equipment and interfaces for the testing and calibration of semiconductors and sensors.

Rosenheim, Germany

Manufacturer

Mirtec Selected By Its Customers For a 2011 Service Excellence Award

Apr 20, 2011 | MIRTEC, "The Global Leader in Inspection Technology", announces that it has been awarded a 2011 Circuits Assembly Service Excellence Award in the category of Electronics Suppliers — Test and Inspection for its outstanding customer ratings, as judged by its own customers.

MIRTEC Corp

MIRTEC Corp

MIRTEC has earned a solid reputation as one of the most Progressive and Dynamic Suppliers of Automated SMT Inspection Equipment to the Electronics Manufacturing Industry.

Oxford, Connecticut, USA

Manufacturer

Finetech to Exhibit at NEPCON China 2011

Apr 20, 2011 | Finetech, a world leading equipment manufacturer of advanced rework solutions, will present two rework systems for professional rework applications in booth 2D10-A at NEPCON China 2011.

Finetech

The FINEPLACER® core plus is a compact yet versatile rework system that offers a level of professionalism that exceeds its attractive price.

Finetech

Finetech manufactures innovative, high-accuracy equipment for leading-edge bonding, micro assembly and rework challenges.

Gilbert, Arizona, USA

Manufacturer

VJ Electronix, Inc. Awarded a 2011 NPI Award for Its New SRT Micra Rework Platform

Apr 20, 2011 | VJ Electronix, Inc. announces that it has been awarded a 2011 NPI Award in the category of Rework and Repair Tools for its SRT Micra Rework Platform. The award was presented to the company during a Tuesday, April 12, 2011 ceremony that took place at the Mandalay Bay Resort & Convention Center in Las Vegas during IPC APEX 2011.

VJ Electronix

The SRT Micra is a brand new benchtop platform that is specifically designed for the rework of mobile products incorporating small, high density electronic devices, such as Smartphones, Netbooks, GPS and other handheld products.

VJ Electronix

VJE provides AI technology applications enabling x-ray component counting: highest ROI, speed and accuracy. As electronics manufacturing equipment supplier we provide X-ray counters, rework and x-ray inspection. (978) 486-4777

Chelmsford, Massachusetts, USA

Manufacturer

Count On Tools Introduces MYDATA Glue Tools

Apr 20, 2011 | Count On Toos Inc. introduces new MYDATA Glue Tools for applying adhesive to boards by pin transfer. The new product line includes all standard glue tools (C12, B12, B13, C13 andB14) as well as custom designed tools based on customer specific requirements.

Count On Tools, Inc.

MYDATA Glue Tools.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer

Count On Tools Expands Its Quad Feeder Peel Roller Series

Apr 20, 2011 | Count On Tools Inc., a leading provider of precision components and SMT spare parts, has expanded its line of Quad Feeder Peel Rollers.

Count On Tools, Inc.

Quad Feeder Peel Rollers

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer

Computrol Invests in Four McDry Cabinets from Seika Machinery

Apr 20, 2011 | Computrol, Inc., a world-class provider of mid- to low-volume, high-mix electronic manufacturing services to OEMs, purchased a total of four McDry cabinets from Seika Machinery, Inc. The company purchased two DXU-1001 cabinets and two MCU-201 Dry Storage Cabinets.

Computrol, Inc.

From left to right: Michelle Ogihara, Sales & Marketing Manager at Seika Machinery, and Farid Anani, Computrol’s Manufacturing Manager.

Computrol, Inc.

Computrol, Inc. is a national leader in low to medium volume, high mix contract manufacturer of electronic assemblies. We specialize in customer service, quality and on time delivery. We have 3 locations in the United States.

Meridian, Idaho, USA

Manufacturer

Christopher Associates Wins Prestigious Industry Award for Its Akila XR-3 X-ray Inspection System

Apr 20, 2011 | Christopher Associates Inc. announced that it has been awarded a 2011 NPI Award in the category of Test and Inspection – AXI for its Akila XR-3 X-ray Inspection System. The award was presented to the company during a Tuesday, April 12, 2011 ceremony that took place at the Mandalay Bay Resort & Convention Center in Las Vegas during IPC APEX 2011.

Christopher Associates Inc.

The Akila XR-3 X-ray system is perfectly positioned to provide high value and ease of use for inspecting excess solder, insufficient solder, voids, bridging and opens.

Christopher Associates Inc.

A pioneering supplier and distributor to the electronics and chemical processing industries.

Santa Ana, California, USA

Manufacturer

Christopher Associates Announces Distribution Deal for Intek Plus’ SPI Series

Apr 20, 2011 | Christopher Associates Inc. today announced that it has been appointed as the North American distributor for the Intek Plus SPI Series of solder paste inspection systems.

Christopher Associates Inc.

The SPI Series solder paste inspection systems apply 3D Moiré technology combined with 2-D area inspection to provide unparalleled speed and accuracy.

Christopher Associates Inc.

A pioneering supplier and distributor to the electronics and chemical processing industries.

Santa Ana, California, USA

Manufacturer

BTU International Wins NPI Award for PYRAMAX Solder Reflow Capabilities

Apr 20, 2011 | BTU International has been awarded the 2011 NPI Award in the category of Soldering – Reflow for the new dual-lane, dual-speed capabilities of its PYRAMAX™ solder reflow system.

BTU International

PYRAMAX reflow ovens set the industry standard for thermal performance, providing electronics manufacturers with the highest throughput — and now increased flexibility.

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer

BTU International Appoints Jack Antounian Director of Operations

Apr 20, 2011 | BTU International, Inc., a leading supplier of advanced thermal processing equipment and processes to the alternative energy and electronics manufacturing markets, announces the appointment of Jack Antounian as director of operations.

BTU International

Jack Antounian, BTU International's Director of Operations

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer

BPM Microsystems’ 2800 Universal Device Programmer Wins a Coveted 2011 NPI Award

Apr 20, 2011 | BPM Microsystems announces that it has been awarded a 2011 NPI Award in the category Device Programming for its Model 2800, the newest addition to its manual universal device programmer family. The award was presented to Chris Gear, Customer Service Manager, during a Tuesday, April 12, 2011 ceremony that took place at the Mandalay Bay Resort & Convention Center in Las Vegas during IPC APEX 2011.

BPM Microsystems, Inc.

2800 Universal Device Programmer.

BPM Microsystems, Inc.

Exceptional electronic products start with exceptional programming. BPM Microsystems is the leading global supplier of automated and manual programming systems, serving the semiconductor and electronics industries.

Houston,

Consultant / Service Provider, Manufacturer

Bentek Solar Receives UL 1741 Listing and CSA 22.2 Certification for Its MDSS

Apr 20, 2011 | Bentek Solar, a leader in Balance of System (BOS) design and manufacturing for commercial and utility scale solar PV products, has received UL 1741 listing and CSA 22.2 certification for its Multiple Disconnect Safety System (MDSS).

Bentek Solar

Multiple Disconnect Safety System (MDSS)

Bentek Solar

A leader in manufacturing and engineering solutions for complex electro-mechanical and power distribution systems for the semiconductor and solar industries.

San Jose, California, USA

Manufacturer

Aqueous Technologies to Feature Its Award-Winning Trident Series Automatic Defluxing System at NEPCON China 2011

Apr 20, 2011 | Aqueous Technologies Corp. announces that it will exhibit its award-winning Trident Series Automatic Defluxing System in distributor Shanghai Jamron Electronic Engineering Co. booth #2G32 at the upcoming NEPCON China 2011, scheduled to take place May 11-13, 2011 in Shanghai, China.

Aqueous Technologies Corporation

Trident is completely automatic, providing wash, rinse, cleanliness testing, drying, and SPC processes at the touch of a single button.

Aqueous Technologies Corporation

Manufacturer of automated defluxing/cleaning equipment, cleanliness testing equipment, and stencil cleaning equipment.

Corona, California, USA

Manufacturer

Aqueous Technologies’ Trident Family Wins Its Fifth Industry Award

Apr 20, 2011 | Aqueous Technologies Corp. has been awarded a 2011 NPI Award in the category of Cleaning Equipment for its Trident Zero. The award was presented to the company during a Tuesday, April 12, 2011 ceremony that took place at the Mandalay Bay Resort & Convention Center in Las Vegas during IPC APEX 2011.

Aqueous Technologies Corporation

The Trident Zero is the industry’s most environmentally responsible fully automated defluxing and cleanliness testing system.

Aqueous Technologies Corporation

Manufacturer of automated defluxing/cleaning equipment, cleanliness testing equipment, and stencil cleaning equipment.

Corona, California, USA

Manufacturer

A-Laser to Exhibit Precision Custom Parts at the 2011 Design-2-Part Show

Apr 20, 2011 | A-Laser will exhibit its precision custom parts in Booth #433 at the upcoming Design-2-Part Show, scheduled to take place May 18-19, 2011 at the Santa Clara Convention Center in Santa Clara, CA.

A-Laser, Inc.

A-Laser, Inc.

Custom laser cutting services and precision parts manufacturing.

Milpitas, California, USA

Consultant / Service Provider, Manufacturer

PROFLEX SOLDERING ROBOT

Apr 18, 2011 | PROMATION's new soldering robot a hit at IPC/APEX show in Las Vegas.

PROMATION, Inc.

Dual Head System

PROMATION, Inc.

PROMATION offers automated solution in many key SMT and Backend Assembly areas: PCB handling systems, robotic soldering systems, laser marking, collaborative robots, AMRs and fleet mapping, and work bench/work flow solutions.

Kenosha, Wisconsin, USA

Distributor, Manufacturer

PROMATION's STACKMAX II Parts Tray Handling a Hit

Apr 17, 2011 | PROMATION's new parts tray handling system (which is sold into the automation markets) is a popular hit with numerous integrators.

PROMATION, Inc.

PROMATION, Inc.

PROMATION offers automated solution in many key SMT and Backend Assembly areas: PCB handling systems, robotic soldering systems, laser marking, collaborative robots, AMRs and fleet mapping, and work bench/work flow solutions.

Kenosha, Wisconsin, USA

Distributor, Manufacturer

STI Electronics’ Frank Honyotski to Present New IPC-A-610E and J-STD-001E Updates at the SMTA Space Coast Chapter Meeting

Apr 09, 2011 | STI Electronics, Inc. announces that Frank Honyotski will present the new IPC-A-610E and J-STD-001E updates at the upcoming SMTA Space Coast Chapter Meeting, scheduled to take place Thursday, May 5, 2011 at 12 p.m. from 11:15 a.m.-1:00 p.m. at the MC Assembly Conference Center in Palm Bay, FL.

STI Electronics

Frank Honyotski

STI Electronics

Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry.

Madison, Alabama, USA

Consultant / Service Provider, Manufacturer, Standards Setting / Certification, Training Provider

COT Offers Fuji NXT Nozzle Repair & Rework Services

Apr 09, 2011 | Count On Tools Inc. now provides Fuji NXT Nozzle Repair and Rework Services. This service is available for all standard nozzles for the H01, H04 and H08/H12 heads.

Count On Tools, Inc.

Fuji NXT Nozzles

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer

Machine Vision Products and Dynamic Process Control provide LEAN Shop Floor Management to your process

Apr 08, 2011 | Carlsbad, CA – April 7, 2011: Following continuing growth in Europe, Machine Vision Product’s introduces their proven Dynamic Process Control (DPC) into North American Markets.

Machine Vision Products, Inc

Dynamic Process Control

Machine Vision Products, Inc

MVP is a market innovator and leader in imaging technologies for Surface Mount, Microelectronics and Packaging Technologies providing solutions for both commercial and military applications.

Vista, California, USA

Manufacturer

MYDATA Thrives On Growing Demand In Electronics Industry

Apr 07, 2011 | Riding an upswing in the global electronics industry, MYDATA, an innovator of surface mount technology solutions (SMT), saw a major recovery in 2010.

Mycronic AB

Mycronic AB

Mycronic's High Flex division offers SMT equipment and solu­tions to high-mix electronics manufacturers with a requirement for quick changeover, high quality and high equipment utilization rate.

Täby, STOCKHOLM, Sweden

Manufacturer

MARTIN Launches Web Site for North American Market

Apr 07, 2011 | MARTIN announces the launch of its new North American Web site. The new easy-to-navigate site, located at www.bgarework.com, highlights the company’s rework and dispensing products available in North America.

MARTIN (a Finetech company)

MARTIN (a Finetech company)

Manufacturer of rework and reballing systems, hand soldering solutions, and micro-dispensing technologies

Manchester, New Hampshire, USA

Manufacturer

News per page:

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435

  • SMTnet
  • »
  • SMT, PCB Electronics Manufacturing & Assembly Industry News
One stop service for all SMT and PCB needs

pressure curing ovens