SMT, PCB Electronics Assembly Manufacturing Industry News
Stay informed with latest electronics manufacturing news added by SMTnet members.
- SMTnet
- »
- SMT, PCB Electronics Manufacturing & Assembly Industry News
21790 SMT / PCB Assembly Industry News Releases
Seika Machinery to demo leading equipment from McDry, Sawa, Sayaka MALCOM and more at APEX
Jan 03, 2022 | Seika Machinery, Inc. is pleased to announce plans to exhibit at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. Seika will highlight the following equipment in Booth #1914: McDry Storage Cabinets, Sawa Ecobrid Stencil Cleaner, Sayaka SAM-CT23S Table-Top PCB Router, Tsuchiyama n=1 Checker and MALCOM RCX Series Modular Reflow Oven Profiling System.
Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products
Torrance, California, USA
What does the Tire Pressure Sensor Fault Mean?
Dec 30, 2021 | Automotive sensors are the fastest growing and most used type in recent years. The development of the automotive industry stimulates the improvement of automotive pressure sensors. Advanced manufacturing and process technology strengthen the performance of sensors, and tire pressure monitoring is increasingly accurate.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Car AC Compressor Troubleshooting-- Best Suggestions
Dec 30, 2021 | Using a straight edge and a feeler gauge to examine the flatness error between cylinder head, cylinder block, crankcase and bottom cover, which should not be more than 0.05mm, otherwise, you should grind it. If there are cracks in the cylinder block and cylinder head through observing or knocking, replace them with new ones.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Where is Servo Motor and Servo Drive Used?
Dec 29, 2021 | With the development of information, communication and automation technology, a wide variety of automatic control devices have been used in industry production and daily life of modern world. As one of the most common devices for automatic control, servo system, constituted by servo motor and servo drive has been widely used in our daily life.
With our article here, you can get a deeper understanding where exactly can servo motor and servo drive can be used.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Basics of Servo Motor You Should Know
Dec 29, 2021 | Servo control refers to the effective control of the position, speed and acceleration of certain object to meet a certain purpose. It is one of the most important control methods in modern industry.
Servo control system has been so widely used in industry, but do you know the basic knowledge about servo control? Check out this article to learn about how servo control system works and setting up tips.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
How to Replace Refrigerator Compressor
Dec 28, 2021 | If the refrigerator compressor is broken and can no longer be repaired, you need to buy a new one to replace it. When replacing, you need to follow the correct steps. Then how to change the refrigerator compressor? The following are the detailed steps.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
When You Should Use an Absolute Encoder - Pros and Cons of Different Absolute Encoders
Dec 28, 2021 | As is known to us, rotary encoders consist of incremental encoders and absolute encoders. And absolute encoders are much more expensive than incremental encoders. In fact, both two types of encoders are used for position measurement. So what's the point of using an absolute encoder?
For distance measurement applications, both incremental and absolute encoders can be chosen - from a technical point of view. The advantages of absolute encoders are reflected in accuracy and performance, while incremental encoders seem more economical and practical.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
6 Reasons for Refrigeration Compressor Not to Start
Dec 27, 2021 | When speaking of air conditioners, everyone is familiar with them. Especially in the hot summer, we would not know how to live without it. But when it comes to refrigeration compressors, many consumers are not particularly clear. In fact, the refrigeration compressor is an important part of air conditioners and refrigerators, and its performance and quality directly determine the cooling effect of them. The following is an introduction to the types of refrigeration compressors.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Why Refrigeration Compressor Oil Deteriorates & How to Add Oil
Dec 27, 2021 | The lubricating oil used in a refrigeration compressors can lubricate the friction surface, reduce the friction work, friction heat and avoid wear of the compressor motor. Besides, filling the sealing part with oil can ensure its performance and prevent the leakage of refrigerant.
Here are four reasons why the oil of refrigeration compressor deteriorate.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Japanese Giant Mitsubishi Heavy Industries Goes Into Central Air Conditioners for Home Use
Dec 26, 2021 | In recent years, it's probably difficult for people to choose between central air conditioners and split air conditioners for home use. In fact the time that central air conditioners are used for home refurbishing is not long yet.
To many people, central air conditioner is an integrated indoor temperature control solution. Compared with the traditional split air conditioner, it has higher efficiency, lower energy consumption, and at the same time, it can save indoor space and maintain the integrity of the interior decoration.
Regarding its installation, central air conditioner is installed in hidden places in the room, mostly attached to the ceiling, which is much more beautiful than cabinet type or split hanging type air conditioner.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
High Temperature Mulfunction of Screw Compressor and Solutions
Dec 26, 2021 | 1. Reasons of High Temperature Breakdown
1.1 Environmental Factors
Ambient temperature may not be the main cause of high temperature shutdown, but it is often the inducement of compressor high temperature shutdown.
Generally, technicians have a design operating environment temperature (30-40 ℃) when designing compressors. When the air compressor is operated under the designed operating environment temperature, its maximum temperature is close to the protection temperature of the air compressor.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Where is the Throttle Position Sensor Located?
Dec 24, 2021 | The throttle Position Sensor (TPS), located on the butterfly spindle, is operated by the throttle, and its installation varies according to the structure. For a traditional mechanical cable throttle, the throttle position sensor is usually installed on the side of the throttle body in the form of an independent component. And its rotation openness is driven by the throttle shaft, as shown in figure 2. For the commonly used electronic throttle, the throttle position sensor is integrated into the electronic throttle control component, as shown in figure 3.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
What's the Difference between Semi-Hermetic Compressors and Hermetic Compressors?
Dec 24, 2021 | In the hermetic compressor, the motor and the compressor share the main shaft (reciprocating type), and the compressor unit is suspended in the housing by spring. The casing is divided into upper and lower parts. After the internal components are assembled, the upper and lower interfaces will be sealed by welding. The suction pipe, exhaust pipe, and process pipe are drawn out of the outer shell.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Piston Compressor Basics - Structure, Working Principle, Advantages and Disadvantages
Dec 23, 2021 | As both manufacturers and end customers know, in a refrigeration or air conditioning system, the compressor is the equipment core by continuously sucking back and exporting refrigerant. Once the compressor breaks down or stops working, the whole cooling system will be interrupted.
Piston compressor is widely used in large and medium-sized cold storage. Here we will explain in detail the structure, working principle, advantages and disadvantages and common fault diagnosis of piston compressors.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Five Pros of Refrigeration Compressor of Mitsubishi Electric
Dec 23, 2021 | For refrigeration products, high efficiency and energy saving are the constant pursuit and breakthrough of technology. In cooling industry, Mitsubishi Electric has been occupying a significant place.
With article, we are going to talk about five advantages of refrigeration compressor of Mitsubishi Electric to allow everyone to understand the technologies of Mitsubishi, and how they have made Mitsubishi a big shot in HVAC industry worldwide.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
How to Test a Mass Flow Sensor?
Dec 22, 2021 | The mass flow sensor, or air flow sensor is one of the important sensors of the electronic fuel injection engine. It is installed between the air filter and the intake hose to measure the intake volume of the engine cylinder and adjust the fuel ratio according to it.
The mass flow sensor converts the inhaled air flow into electrical signals and sends them to the electronic control unit (ECU). As one of the basic signals to determine the fuel injection, it is a sensor that measures the air flow of the suction engine. So if you want to test it, how should you do? Let's start it.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
How to Calibrate a Pressure Transmitter Before Use
Dec 22, 2021 | Pressure transmitter is a kind of commonly used measuring instrument, which can convert the physical parameters such as gas and liquid sensed by load cell into standard signal output.
It has the advantages of measurement, stable performance, high sensitivity and easy operation.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Fully Flux Residue Compatible, Room Temperature Fast Flow, Reworkable Underfill SMT 88UL2
Dec 22, 2021 | YINCAE is excited to announce that we have developed and upgraded SMT 88UL to SMT 88UL2, a fully flux residue compatible, room temperature fast flow and easily reworkable underfill.
YINCAE Advanced Materials, LLC.
Yincae Advanced Materials, LLC is a developer, manufacturer, and supplier of high performance coatings, adhesives, electronic and optoelectronic materials.
Albany, New York, USA
A Quick Look at HMI Touch Screen in Industrial Scenes
Dec 21, 2021 | In modern society, mobile phone is almost a necessity for everyone. When your mobile phone is not around, you may easily feel anxious as if something is missing, which is called nomophobia.
In the past, people used to check if they had taken money when they went out. But now, mobile phone is the thing people must take. As is known to us, as long as you take a mobile phone, it's easy to get food, clothes, and to take transport. Look at our mobile phones, you will find almost all of them are equipped with touch screens now, which are much better than the early keyboard for using.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Battle of Giants - Differences of PLC by Siemens, Allen-Bradley and ABB
Dec 21, 2021 | Many industrial equipment manufacturers in the world are producing PLC. The product and market competition between different companies is unavoidable. While top companies receiving great popularity for their products, the clashes and differences between them are always notable too.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
KIC in Booth 3009, IPC-APEX Expo 2022: Solutions for Reflow/Wave/Selective Soldering and Curing - with Optimization, Process Control, Inspection and Traceability
Dec 21, 2021 | KIC will exhibit in booth 3009 and the Factory of the Future Pavilion at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022, at the San Diego Convention Center San Diego, CA. The KIC team are thermal process experts who make ovens smarter. Along with award-winning Reflow Process Inspection (RPI) and Wave Process Inspection (WPI), the KIC team will discuss NPI setup, process and recipe optimization for reduced defects, improved OEE, oven performance tracking and their complete ecosystem of solutions for thermal processes.
KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.
San Diego, California, USA
Inovaxe Unveils New Smart Storage Technologies at APEX
Dec 21, 2021 | Inovaxe will exhibit in Booth #933 during the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. The Inovaxe team plans to showcase the award-winning InoAuto Smart Storage Platform alongside a number of exciting new products and technologies, including an InoAuto Mobile Device, a wireless mesh network, and the all new SR700-FLEX for configuration-less storage.
Inovaxe is focused on developing state-of-the-art Inovative Material Handling Solutions (MHS) for Low-Volume/High-Mix Manufacturing.
Deerfield Beach, Florida, USA
SEHO to Show Award-Winning Soldering Solutions at APEX 2022
Dec 21, 2021 | SEHO North America, Inc. will highlight innovative solutions for cost-efficient high-mix-high-volume production in Booth #1900 at the IPC APEX EXPO, scheduled to take place Jan. 25 - 27, 2022 at the San Diego Convention Center.
The SEHO brand stands for innovative systems for all fields of automated soldering processes, solutions for THT-AOI, customized automation technology and know how. Our customers profit from complete solutions that perfectly match.
Kreuzwertheim,
See the Industry's Next-Generation Mounter in Juki's Secret Room at APEX
Dec 21, 2021 | Juki Automation Systems (JAS), Inc. is pleased to announce plans to exhibit in Booth #2730 at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. The Juki team will be demonstrating the industry's next-generation mounter in a secret room, as well as showcasing the proven RS-1R Placement Machine, RV-2-3DHL, JM-50, iCube, G-Titan Automated Screen Printer, Autonomous Material Handling System and the new P20 rotary head.
Juki Automation Systems Inc. is one of the worlds leading SMT placement companies with over 45,000 machines installed worldwide and is the pioneer of the modular automated assembly line. see www.jukiamericas.com for more info.
Morrisville , North Carolina, USA
CyberOptics Features Best-in-Class Inspection Systems Powered by MRS™ Sensor Technology at APEX
Dec 21, 2021 | CyberOptics® Corporation will demonstrate the SQ3000™ Multi-Function system for AOI, SPI and CMM in Booth #2541 at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. The company also will feature the new SQ3000+ system.
CYBEROPTICS is a global leader in high-precision 3D sensors that significantly improve yields and productivity in the 3D scanning and metrology, Surface Mount Technology & Semiconductor Markets
Minneapolis, Minnesota, USA
Scienscope's Global Sales Team is Ready to Meet in Person at APEX 2022
Dec 21, 2021 | Scienscope International will exhibit at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022, at the San Diego Convention Center in California. The team will showcase the Incoming material system (IMS-100) and AXC-800 III Component Counter, Smart Storage Rack (New), 6000 X-ray Inspection, and microscope division in Booth #3508.
Scienscope supplies inspection equipment, including stereo zoom microscopes, video an X-Ray inspection equipment, automated optical inspection systems, magnifiers, measurement systems.
Chino, California, USA
PVA Showcasing New Valve Tool Changer and Motorized Tilt for Delta 8 Selective Conformal Coating at APEX
Dec 21, 2021 | PVA today announced plans to exhibit at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. The team will showcase four systems in Booth #2301, including the Delta 8 Selective Conformal Coating Machine with the new Valve Tool Changer and 5th Axis Motorized Tilt. Additionally, a Delta 8 Coating/Dispensing System will be equipped with a PDP Progressive Cavity Dual Pump with Fiducial Camera and Needle Calibration, another Delta 8 Coating/Dispensing System will be on display with the MR1 Metered Piston Dispenser, and the Sigma Benchtop Robot will be shown with the FCS300 Spray Valve and FCM100 Front Closing Micro Dispense Valve.
Precision Valve & Automation (PVA)
PVA is a supplier of conformal coating systems, fluid dispensing solutions and precision valve technology used in industries from solar, semiconductor packaging, PCB assembly, medical device manufacturing & consumer electronics.
Halfmoon, New York, USA
Insituware to Demo Vision MARK-1 Device for Conformal Coating and Solder Paste Fitness for Use at APEX
Dec 21, 2021 | Insituware LLC is pleased to announce plans to exhibit at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. The Insituware team will demonstrate the Vision MARK-1 at Booth #1225. The Vision MARK-1 currently offers measurement functionalities to determine solder paste and conformal coating fitness for use, with expandability for future materials measurements.
Insituware is the first smart in situ measurement solution with integrated machine learning technology.
Mullica Hill, New Jersey, USA
Plasma Treatment, Fluid Dispensing and Conformal Coating from Anda at APEX
Dec 21, 2021 | Anda Technologies today announced plans to exhibit at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. The team will showcase the Anda AP-3P for the first time in the US in Booth #1307.
Manufacturer of automated machinery for selective conformal coating, fluid dispensing, plasma treatment, assembly machines, and complete factory process line solutions.
Freemont, California, USA
Wafer-Level Packaging Symposium (WLPS) Program Announced and Registration Now Open
Dec 21, 2021 | The SMTA is pleased to announce the technical program for the Wafer-Level Packaging Symposium (WLPS). The symposium will be held February 15-17, 2022 at the DoubleTree by Hilton Hotel in San Jose, California.
Surface Mount Technology Association (SMTA)
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Eden Prairie, Minnesota, USA
Association / Non-Profit, Events Organizer, Training Provider
MIRTEC to Display Award-Winning 3D AOI and SPI Solutions at APEX 2022
Dec 21, 2021 | MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems in Booth #1122 at the 2022 IPC APEX EXPO. The premier technical conference and exhibition for the electronics manufacturing industry will take place January 25-27, 2022, at the San Diego Convention Center.
MIRTEC has earned a solid reputation as one of the most Progressive and Dynamic Suppliers of Automated SMT Inspection Equipment to the Electronics Manufacturing Industry.
Oxford, Connecticut, USA
MacDermid Alpha's Kester Brand Announces Partnership with Proactive Process Solutions Group, LLC
Dec 21, 2021 | The Kester brand of MacDermid Alpha Electronics Solutions is proud to announce a partnership with Proactive Process Solutions Group, LLC.
MacDermid Alpha Electronics Solutions
A materials supplier to the electronics industry. Our breadth of products includes Solder Paste, Solder Preforms, Stencils, Liquid Soldering Flux, Soldering Alloys, Cored Wire, Adhesives, Cleaners and Sinter Technologies
Altoona, Pennsylvania, USA
Indium Corporation's Brian O'Leary Accepts 'Global Head of e-Mobility & Infrastructure' Role
Dec 21, 2021 | Indium Corporation is pleased to announce that Brian O'Leary has accepted a new role as Global Head of e-Mobility & Infrastructure in addition to his current position as Global Accounts Manager.
Solder pastes, solder preforms, solder spheres, soldering fluxes, electrically-conductive adhesives. All alloys: tin-lead, lead-free, indium alloys, and more.
Utica, New York, USA
1 Click SMT Gears Up to Demo Best-in-Class Offline Selective Soldering at APEX
Dec 21, 2021 | 1 Click SMT Technology Co., ltd is pleased to announce plans to exhibit at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. The Ant-i1 Offline Selective Soldering Machine will be on display in booth #3344.
1 CLICK SMT TECHNOLOGY CO., Limited
Manufacturer of selective soldering machine, soldering robot, reflow oven, wave solder machine, pcb handling machine. Distributing for Turnkey line include SMT line, conformal coating lines, through hole line.
Dongguan City, China
Proven Reflow with Next-Gen Flux Management from BTU at APEX
Dec 21, 2021 | BTU International, Inc. today announced plans to exhibit during the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. The company will showcase its Aqua Scrub™ Flux Management Technology and a PYRAMAX™ 125N reflow oven in Booth #1601.
Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.
North Billerica, Massachusetts, USA
KYZEN Unveils Next-Generation Aqueous Cleaning Solution at IPC APEX EXPO 2022
Dec 21, 2021 | KYZEN has been working tirelessly on the release of their newest aqueous product. The company will be announcing the newest addition to its award-winning AQUANOX line at the IPC APEX EXPO 2022 happening January 25 – 27 at the San Diego Convention Center in San Diego, CA.
A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.
Nashville, Tennessee, USA
Jade Micron Pte Ltd Orders Second Hentec/RPS Pulsar Solderability Test System
Dec 20, 2021 | Pulsar solderability test system determines how well molten solder will wet on solderable surfaces of electronic components.
Hentec Industries, Inc. (RPS Automation)
Hentec Industries, Inc. designs and manufacturers high quality precision machines for use in selective soldering, lead tinning, and solderability testing applications.
Newman Lake, Washington, USA
Adhere to innovation and originality - Unicomp Technology 3D CT Inline X-ray won the "China SMT Innovation Achievement Award"
Dec 20, 2021 | 2021 China South China SMT Academic and Applied Technology Seminar and China SMT Innovation Achievement Award Ceremony was held in Shenzhen on December 10. In order to build a good communication platform for SMT enterprises in South China and create opportunities for technical exchange, the SMT Academic and Application Technology annual meeting in South China is held every December by the SMT Special Committee of Guangdong Electronics Society. This annual meeting invited industry experts to explain the innovation direction of intelligent manufacturing SMT technology and SiP packaging, from PCBA to micro assembly, to solve the hot issues of high-density, thin and miniaturization of electronic products, especially mobile terminal electronic products in recent years.
Unicomp Technology was incorporated in 2002. It is a national level high-tech enterprise which involved in the R&D and manufacturing of X-ray technology and intelligent detection equipment.
Wuxi, China
How to Connect Rotary Encoder with Arduino Board UNO
Dec 19, 2021 | Rotary encoder is an input device to help users interact with the system. It looks like a radio potentiometer, but it's unique that it outputs a series of pulses.
The encoder rotates in small steps so that it is very suitable for many applications such as stepper / servo motor control, serial navigation menu, and increasing / decreasing digital values.
In this article, we will have a brief look at different types of encoders and how they work, and next get a closer look at how to connect a rotary encoder with Arduino board UNO. By controlling the value of integer through rotary encoder, we will display it on LCD 1602.
You will be familiar with using rotary encoders for your project. Let's get start!
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
Basics of Encoder and Orthogonal Coding
Dec 19, 2021 | Encoder is a kind of electromechanical equipment, which can be used to measure the movement of machinery or the target position of machinery. Most encoders use optical sensors to provide electrical signals in the form of pulse sequences, which can be converted into motion, direction or position information in turn.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
What to do if Your Compressor is in Reverse Rotation
Dec 17, 2021 | As we know, the operation of the internal compression structure of the refrigeration compressor has a fixed direction. First of all, we should make it clear that the reverse rotation of the compressor is adverse.
Scroll refrigeration compressors can only compress in one direction of rotation. Single-phase compressors always start and run in the correct direction, except in the case of instantaneous power failure. The direction of rotation of the three-phase compressor is determined by the phase sequence of the power supply, so there is a chance that the compressor will rotate reversely.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
How to Reduce Noise of Air Compressor?
Dec 17, 2021 | Air compressors can provide stable air flow with little pressure fluctuation, which has the advantages of stable rotation and high efficiency. It is the auxiliary production facility of many industrial enterprises and plays an important role in production.
As an instrument of loud noise in the first place, the strong noise produced by an air compressor during operation may deteriorate the working conditions and living environment of people. How to reduce the noise of air compressors is a common problem in industrial noise control.
This article will give you some solutions. First of all, you need to find out the source of the noise.
OKmarts is an authorized and one-stop online mall for industrial parts covering refrigeration compressors, servo drives, servo motors, amplifiers, VFDs, HMIs, PLCs, encoders, sensors and more!
Hartford, Connecticut, USA
TRI brings AI-powered Inspection to IPC APEX EXPO 2022
Dec 17, 2021 | Test Research, Inc. (TRI) will join IPC APEX EXPO 2022 held at San Diego Convention Center to showcase its Smart Factory inspection and test solutions for the electronics manufacturing industry. Visit TRI at booth #915 on January 25 – January 27, 2022, to discover TRI's latest Smart Factory innovations that aim to optimize the SMT production through AI-powered Inspection, multiple 3D technologies, metrology inspection, real-time SPC trends, and M2M communications.
Test Research is the World's leading supplier of Test and Inspection Solutions in the PCBA Manufacturing Test & Inspection Industry. From 3D SPI, 3D AOI and 3D AXI Systems to MDA, ICT and Functional Test. Industry 4.0 Ready.
San Jose, California, USA
MacDermid Alpha to Exhibit and Promote Latest Technology at Semicon Taiwan
Dec 17, 2021 | MacDermid Alpha Electronics Solutions will exhibit its total process solutions for the emerging semiconductor market at the Semicon Taiwan, Taipei City, December 28-30, 2021 at Taipei Nangang Exhibition Center, Hall 1 (TaiNEX 1).
MacDermid Alpha Electronics Solutions
A materials supplier to the electronics industry. Our breadth of products includes Solder Paste, Solder Preforms, Stencils, Liquid Soldering Flux, Soldering Alloys, Cored Wire, Adhesives, Cleaners and Sinter Technologies
Altoona, Pennsylvania, USA
LeeMAH Electronics, TX Facility installs new T6 & T7 Cleaners to support increased production demand
Dec 17, 2021 | LeeMAH Electronics has purchased and successfully completed the install of its two-machine setup of the Aqua Klean Typhoon T-6 and T-7 Zero-Discharge Cleaners at its facility in Richardson, TX. The sale was liaised by Scott Fillebrown, Principal, Southwest Systems Technology, Inc., Aqua Klean's manufacturers' representative in the states of Texas, Oklahoma, Arkansas and Louisiana.
Southwest Systems sells capital equipment & materials for the electronic & semiconductor manufacturing industries. We cover Texas, Oklahoma, Arkansas, Louisiana, & Mexico except for the states of Sonora & N/S Baja California.
Anna, Texas, USA
KYZEN's Senior Chemist Wins Women's Excellence in Metal Forming and Fabricating Award 2021
Dec 17, 2021 | KYZEN is proud to announce that Haley Reid, Senior Research and Development Chemist at KYZEN, was recognized as one the Women of Excellence in Metal Forming and Fabricating 2021.
A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.
Nashville, Tennessee, USA
Generic Custom Test Interface Fixture Rated to 2100 Vdc, CB8H For Panel- and Cable-Mounted Connectors, and LIF Test Blocks
Dec 17, 2021 | CAMI Research Inc. (Acton, MA), manufacturer of the CableEye® automation-ready cable and harness test system, has rolled out a test interface board that can be customized with LIF test blocks and any number of panel- and/or cable-mounted connectors not exceeding a total of 64 pins. Rated to 2100 Vdc/1200 Vdc, the CB8H fits all CableEye testers. Connectors not included. Customization service is available.
CableEye® continuity and HiPot pass/fail & diagnostic Cable & Harness Test Systems w simple scripting, labeling, documentation, cataloging & relay control. Dynamically display continuity, Ω, diodes, IR, dielectric breakdown & more
Acton, Massachusetts, USA
Indium Corporation to Present at SPIE Photonics West
Dec 17, 2021 | One of the most highly demanded applications for 80Au20Sn is semiconductor laser die-attach due to recent advancements that have made lasers an economical option for a multitude of new products. However, a key challenge with semiconductor lasers is thermal management, as these devices generate a significant amount of heat. Indium Corporation Product Specialist Jenny Gallery will present on how to manage heat with AuSn preforms at SPIE Photonics West, Jan. 22-27, San Francisco, Calif., U.S.
Solder pastes, solder preforms, solder spheres, soldering fluxes, electrically-conductive adhesives. All alloys: tin-lead, lead-free, indium alloys, and more.
Utica, New York, USA
Nordson's semiconductor packaging solutions for a smart and connected new world to be demonstrated at SEMICON Taiwan 2021
Dec 17, 2021 | See equipment and talk to experts about the latest in fluid dispensing, test, inspection, and plasma treatment in one booth, #I2716
3M Electrical Solutions Division
A full range of product, software and service solutions to help electronics manufacturers maintain an effective EOS/ESD control program.
Austin , Texas, USA
New Dual N-Channel 6A/20V MOSFET is designed for LIB Charging and Discharging Switches
Dec 17, 2021 | Good-Ark Semi's MOSFET with ESD Protection from New Yorker Electronics provides Low Gate Charge and High Repetitive Avalanche Rating
New Yorker Electronics is a certified authorized distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948.
Northvale, New Jersey, USA
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436
