JOT Optical BGA Rework Station FG-
Model: |
JOT Optical BGA Rework Station FG- |
Category: |
|
Model Year: |
2012 |
Condition: |
|
Value: |
$ 1.00 |
Location: |
China |
Offered by: |
Three independent heaters control systems.
FG-P6000 is available heating portion of the PCB board by hot-air circulate both from top and bottom at the same time. With large IR bottom heating, it can completely avoid PCB deformation during reworking period, Through the software be freely chosen or used alone in the top or the bottom, and combine freely with top and bottom heater’s capacity, to make it easy for rework double BGA, CCGA, QFN, CSP, LGA, SMD etc. External sensor socket is precise detected temperature to analyze and proof on actual temperature curve of BGA at the same time.
◆ ◆ Precise optical alignment system
Use the high definition and adjustability CCD color optical visual system. Which has the spectral double color, zoom-in or zoom-out and trimming function, and equipped with automatic color resolution and brightness adjusting device, which can adjust the image’s resolution and brightness. All-round observe alignment between the BGA’s four corners and the solder ball by using the joystick to control optical lens move from forth to back, left and right. X, Y axis are adopt with micrometer adjust, the Ф Angle with stepping driving, alignment accuracy is within ± 0.01MM, 15″ TFTLCD (High definition LCD monitor) monitor.
◆ ◆ Multi-function humanized operation system
With touch screen interface, k-type thermocouple, close-loop control, and intelligent temperature compensation with automatically system, integrated design of top heater and sucker point. precise module transmission which can accurately control the heating spot, has automatic mounting, welding and desoldering function., The third heater (preheat box) can be move along the X Y axis with multi-notch, and accurate micrometer fine-tuning. Suitable for the PCB which BGA chips at different located. Laser rapid positioning, then magnetic locked, Temperature can be set for 8 segments rising and 8 segments cooling, and store 100 groups of temperature profile, and can be set according to different BGA at any time
◆ Superior safety functions
After finish desoldering and soldering, there is alarming, when temperature goes out of control, the circuit will automatically power off, it is of double excess temperature protection function. Temperature parameter has a password to avoid arbitrary changes, with superior safe protection functions, can protect PCB, components and the machine from damage at any abnormal situation.
Company Information:
