Electronics Forum | Mon Aug 20 10:03:48 EDT 2007 | slthomas
Wow. Never have, never would, but that doesn't mean it couldn't be done. Mostly it just seems impossible to design a carrier clip that could hold both well...more likely it would hold one well and the other poorly, or both poorly. Anyway, is there
Electronics Forum | Wed Apr 01 14:01:33 EDT 2009 | wbrenner
Has anyone used Orbel E-Z SHIELD, Surface mount two-piece fence and cover? They do not recommend pad size, any suggestions In addition, we are considering RFI Clip (Autosplice PN MINI7-V2004115AA/TT). I have concerns about alignment, Possible flo
Electronics Forum | Mon Jun 29 11:15:12 EDT 2009 | davef
Here on SMTnet, we've talked about using toaster ovens to reflow solder paste previously. Search the fine SMTnet Archives for more. Here's a clip from one of those threads: Look here: http://www.pcbexpress.com/stencils/stencil_article_page1.htm
Electronics Forum | Mon Apr 25 17:46:04 EDT 2011 | ldavis
I think Patrick is on the right track. Try running the fixture 180deg out from typical, if possible, and see if the problem goes away or moves to another fuse clip. I've also noticed some wave fixtures can create air pockets that won't allow proper
Electronics Forum | Wed Apr 25 14:41:13 EDT 2012 | davef
Try: Equipment, Sldr pallet hdware clips * Summit Precision 5825 S 25th St, Phoenix AZ 85040 Dennis Miller 602-268-3550 summitprecision.com sales@summitprecision.com * Southco 210 N. Brinton Lake Rd, Concordville, PA 19331-0116; 610-459-4000 southco
Electronics Forum | Sat Nov 03 11:20:35 EDT 2012 | davef
EricR: There's substantial information about the properties of solder alloys on the web. Here's an example of something that I clipped from one site Alloy ||Solidus (°C)||Liquidus (C°) ||Tensile Strength (psi / MPa) Sn42 Bi58||-E-||138||8000 / 55.2
Electronics Forum | Tue Apr 09 22:32:05 EDT 2013 | jeffr
There is no easy way... but this is how I do it.. Origin the R axis, losen the idler bearings on the belt, remove the C clips at the top of the heads, lift up and remove the spindle assemblies being careful not to lose the 2 balls in the side of the
Electronics Forum | Wed Jun 19 09:14:37 EDT 2013 | rgduval
I've used it at my last two companies, and quite like it. The base floor has to be prepared correctly, so that the epoxy bonds correctly, but, it's easy to maintain, and is pretty durable. Repeated movement of bench chairs over it does cause wear
Electronics Forum | Tue Oct 01 11:56:57 EDT 2013 | bobpan
I would try the following: 1. Back up your mod codes or make sure they are up to date. 2. Turn off the machine and slide a business card between the battery and the clip located on the EPCU card in the front card rack. 3. Download back in your mod co
Electronics Forum | Tue Jan 09 06:45:08 EST 2018 | micomac
We have Europlacer flexys pick and place. We have had 3 turret collisions with 8mm feeders arising from the tape retaining clip coming free during operation. Have asked Europlacer for part numbers for safety catches that a technician told me existe
