Electronics Forum | Thu May 29 13:12:10 EDT 2008 | yam6rider
Just like to know what you guys thoughts regarding mixed alloys. Production run SAC305 and some components are SAC105. So, which profile should you follow. SAC105? or SAC305.
Electronics Forum | Tue May 14 21:40:23 EDT 2013 | ultimatejoker
What is the different between SAC and LF Solder Alloys?I found out that LF38 is SAC105 and LF45 is SAC305. Is it because LF is some standard international name for particular country?
Electronics Forum | Tue May 14 21:59:25 EDT 2013 | davef
SAC is a lead free solder alloy. At one time, Nippon Micrometal Corp. (NMC) [158-1, Sayamagahara, Iruma, 358-0032, Japan; +81.4.2934.6101 F+81.4.2934.5454 nmc-net.co.jp] called some of its alloys: LF35, LF45(SAC305), LF38(SAC105) and LF31(SAC405).
Electronics Forum | Wed Sep 24 19:18:53 EDT 2008 | ratsalad
We had a PCB vendor provide us with SAC105 plated HASL boards. They worked fine on the first pass through reflow. The second pass was not pretty. We couldn't get much of anything to solder to the board. That may not have been the alloy, it could
Electronics Forum | Mon Jan 10 16:58:48 EST 2011 | piter
Hi Ripal it seems that you have problem with compatibility of alloy and quality of solder balls. First check solder alloy form BGA balls what is it?(SAC105,SAC305, etc.) what type of solder paste you use?? third thing is what type of finishing you h
Electronics Forum | Wed Nov 08 10:48:34 EST 2023 | processman
Hi Was wondering what the general take is with reflow profiles to take into account differing solder paste alloy compared to the solder alloy used for the bumps of a bga device. For instance, SAC305 solder paste and BGA device with SAC105 (higher m
Electronics Forum | Mon Nov 13 18:36:32 EST 2023 | emeto
Your reflow profile should be designed towards the flux in your solder paste. To form a proper inter-metallic layer, you need to reach 20-30C above your melting point and stay in liquidus state for certain amount of time. SAC 105 has 3C difference fr
Electronics Forum | Tue Oct 03 17:04:07 EDT 2006 | cuculi54986@yahoo.com
Glenn, What alloy are you using for Pb-free HASL? You say tin copper nickel, but is it SN100C? Against manufacturing engineering's recommendation, my company specified simply "Pb-free HASL" as the finish for our Pb-free PCBs. One of our suppliers
| 1 |
