SMT / PCB Products and Services
SMT, PCB Manufacturing products and services offered by SMTnet members.
This product does not exist or has been removed.
Browse other electronics manufacturing products.
Miniature Angled Flat Reamer/Straight Fork Tip SH-20D (5 1/2")
Angled Flat Reamer Miniature (left) & Standard (right)...
Miniature Straight Flat Reamer/Straight Fork Tip (SH-20C) (5 1/2")
Standard Flat Reamer/Straight Fork Tip (SH-20A) (5 1/2") Description: Straight Flat Reamer...
Round Vulcan Shockproof Spudger, (SH-81) Screwdriver and Conical Ends. (5 1/2" x 5/16")
The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards. Beau Tech spudgers have many advantages compared with...
Standard Straight Flat Reamer/Straight Fork Tip (SH-20A) (8")
Standard Flat Reamer/Straight Fork Tip (SH-20A) (8") Description: Straight Flat Reamer...
Inspection Mirror
Inspection Mirror (SH-133S) The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budg...
Soldering Rework Tools
The tool ends are made of high quality Swedish Hardened Tool Steel, carefully heat treated and tempered to provide a tough, long lasting working edge that resists wear....
Orange Sticks SH-83
Orange Sticks with double beveled ends, 7" x 5/32" (SH-83) The Beau Tech orange sticks are made of high quality non-resin wood which will not contaminate solder and component leads. Natural wood is among...
Push Version Spring Hook SH-150 (9 3/4")
Use these convenient tools to insert, remove, and adjust fine springs and other small parts in hard to reach places. Made of quality polished tool steel and hardened to withstand high tension without breaking or bending. The fine diamond knurled hand...
Probes
These Made in America, Beau Tech RocHard MilProbes are the only complete line of probes available to meet the full spectrum of circuit repair, rework, and assembly needs from Through Hole to 2 mil pitch Surface Mount....
Pull Version Spring Hook SH-152 (9 3/4")
Use these convenient tools to insert, remove, and adjust fine springs and other small parts in hard to reach places. Made of quality polished tool steel and hardened to withstand high tension without breaking or bending. The fine diamond knurled hand...
NASA Style Lead Cleaner SH-66 Lead Cleaner
Use this quality tool to remove oxides, scale, grease and dirt from leads. The tinned copper braided shielding, backed by a stainless steel spring, ensures a fast and easy job. The lead cleaner meets NASA specification NP-200-4 and ensures the best w...
Flat Shockproof Vulcan Spudger, (SH-80) Double Beveled and Conical Ends. (6" x 1/4")
Flat Shockproof Vulcan Spudger SH-80 Double Beveled and Conical Ends. (6" x 1/4") The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, ele...
Stainless Steel Brush (2 5/16") SH-60
Stainless Steel Brush (SH-60) 2 5/16" Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from sold...
ESD Safe Probes
The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards....
Mirrors, Brushes, Spring Hooks, Lead Cleaners
The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budgetary requirement of modern manufacturing. E...
Stainless Steel Brush (3 1/2") SH-61
Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from solder pad and for general cleaning purposes. Available in Standard and Miniature sizes. Stainless Steel Brush (3 1/2&...
A US manufacturer of quality hand tools for those engaged in the repair, rework, R & D, testing, and assembly of electronic components and printed circuit boards from Through Hole to 2Mil Pitch Surface Mount.
Portland, Maine, USA
Selective Conformal Coating Systems - Tilt and Rotate
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $4...
SMT Dispensing Pumps for Integration
Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified...
Benchtop Dispense Robots
Full-featured and compact benchtop dispense system robot offering accurate and repeatable dispense results! A benchtop dispense system does not mean "no features". The Catalina benchtop dispense system is a ful...
Time Pressure Liquid Dispensing Pump with Foot Switch or Dry Contact
Time Pressure Liquid Dispensing Pump with Foot switch / Dry contact A great addition to Fully Automatic Dispensing System Time pressure is a versatile method of dispensing that functions across a wide range of...
Jetting Pump - NCM5000
Jetting Simplified Jetting pumps are excellent for dispensing small volumes of fluid at high rates of speed. The NCM5000 simplifies jetting to its basic elements - this means easy set up, cleaning, and maintenance for you. The drive syst...
Large / Versatile Board Processing - DS Series Dispenser
When Applications Require Large Board Processing &/or Versatility The DS Series of dispensers is a robust, large format platform designed to handle all types of applications with ease. Ideal for dispense applications utilizing adhesi...
Volumetric Pump - PCD
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity pri...
Precision Lead Former for Taped RADIAL Components (CF-9)
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutt...
Benchtop / TableTop Dispensers - Island Series
Simplify Dispensing with GPD Global’s Island Series Dispense Platforms Island Series robots give you versatility to do simple, repetitive automation jobs. Work areas range from 300 mm x 400 mm to 400 mm x 400 mm. All Island Series...
Real Time Process Control for Uniform Fluid Dispensing
Real Time Process Control with FPC: Fluid Pressure Control (Patented) Runs your pump at optimal levels at all times instead of starving or drowning it with inadequate...
Lead Former for Bulk or Loose RADIAL Components (CF-10)
Form & Cut 2-, 3-, 4-, 5-, and 7-leaded Radial Components Capable of forming loose radial components at rates up to 5,000 parts per hour with a variable speed motor. Feed components by hand or with tubes (TO-220s)...
Precision Lead Former for Axial Components (CF-8)
Eliminate Body Stress with Versatile CF-8 GPD's CF-8 eliminates component body stress. Versatility is the key word for the CF-8. Simple tooling changes make short or long run production jobs quick and easy. Capabiliti...
High Precision Dispenser - MAX Series (Non-Heated)
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulat...
Precision Auger Pump
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with...
High Precision Dispenser - MAX II (Heated Dispenser)
Precision Dispensing System for Heated Dispense Applications The GPD Global MAX II is a compact; high-accuracy system designed for today’s advanced heated dispensing applications. The frame is molded from “liquid rock&rd...
Peel Back Force Tester (PBFT)
Proven Peel Back Force Measurement Supplying consistent SMT carrier packaging is critical for customers using SMT pick-and-place machines. Nothing will stop a production line faster than carrier cover tape that doesn’t peel back pr...
A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.
Grand Junction, Colorado, USA
2024 NEW ILJIN ANRC-80CE Reject Conveyor
2024 NEW ILJIN ANRC-80CE Reject Conveyor Specifications Max PCB size: (L) 610 x (W) 508 PCB weight: 3.65 kg Automatic width adjust Speed control 2-stage conveyor...
2024 NEW ILJIN ACC-65CE Transfer Conveyor
2024 NEW ILJIN ACC-65CE Transfer Conveyor Specifications Max PCB size: (L) 610 x (W) 508 PCB weight: 3.65 kg Automatic width adjustment Speed control Front door a...
2024 NEW ILJIN AVT-50CE PCB Inverter
2024 NEW ILJIN AVT-50CE PCB Inverter Specifications Max PCB size: (L) 610 x (W) 508 PCB weight: 3.65 kg Automatic width adjustment Speed control SMEMA interface CE Certifica...
MP elektronik Dry Cabinets
MP elektronik Dry Cabinets Check here https://atekllc.com/product-category/dry-storage-cabinents/...
Mirtec SPI or AOI (Florida Customers Only)
Mirtec SPI or AOI (Florida Customers Only) 3D AOI: MV-3 OMNI, MV-6 OMNI, MV-7 OMNI & MV-9 OMNI 2D/3D AOI; MV-3 & MV-6e 3D SPI: MS-11e, MS-11 & MS-15...
ASSCON Vapor Phase Soldering
ASSCON Vapor Phase Soldering: ASSCON VP2100 Vacuum, ASSCON VP800 Vacuum, ASSCON VP6000 Vacuum & ASSCON VP7000 Vacuum...
PROMATION Conveyors: "The Best Conveyors on the Planet"
PROMATION Board Handling/Conveyors: "The Best Conveyors on the Planet"...
2024 NEW ILJIN Gate Conveyor AGI-80CE
2024 NEW ILJIN Gate Conveyor AGI-80CE 2 – In Stock Specifications Max PCB size: (L) 610 x (W) 508 PCB weight: 3.65 kg Touchscreen SMEMA interface Au...
GETECH Depaneling & Label Marking
GETECH Depaneling & Label Marking Stand Alone or Inline - check website for many options https://atekllc.com/product-category/automation-depaneling/...
kolb Cleaning Technology
Product cleaning in electronics production Product cleaning is the cleaning of highly sensitive components and is an integrated part of the value-added chain. This includes the cleaning of assembled PCBs, hybrids, DCBs, and mispr...
ASC International SPI or AOI (Oldest SPI Company)
AOI: VisionPro Falcon Plus (Inline), VisionPro Merlin Ultra (Batch). VisionPro Merlin (Batch) SPI/AOI Combo: LineMaster Fusion DMi (Batch) SPI: LineMaster Fusion 3D (Inline), VisionPro HSI (Batch)...
2024 NEW ILJIN ACOL-150CE 1.5m Cooling Conveyor
2024 NEW ILJIN ACOL-150CE 1.5m Cooling Conveyor 2 – In Stock Typically used post reflow or other assembly process. Specifications Max PCB size: (L) 610 x (W) 508...
2024 NEW ILJIN AWT-80CE Workstation Conveyor
2024 NEW ILJIN AWT-80CE Workstation Conveyor Specifications Max PCB size: (L) 610 x (W) 508 PCB weight: 3.65 kg Automatic width adjust Speed control 2-stage conve...
Parker SMT - Your #1 Worldwide Supplier for Used Equipment for PCBA. Buying and Selling your SMT or ICT equipment.
Tampa, Florida, USA
Unisoft ProntoPLACE
ProntoPLACE used by electronics manufacturers will quickly program your surface mount SMT and thru-hole assembly equipment. In minutes Unisoft ProntoPLACE software translates CAD or Gerber and Bill of Materials (BOM) file...
Unisoft ProntoGERBER CONNECTION - Gerber Translation Software
If you have only Gerber data files to work with then ProntoGERBER-CONNECTION can help you! ProntoGERBER-CONNECTION imports raw Gerber data and allows the user to add intelligent information to the shapes on th...
Unisoft ProntoTEST-FIXTURE - ATE (Automatic Test Equipment) Software
ProntoTEST-FIXTURE used by electronics manufacturers will accurately setup your Automatic Test Equipment (ATE), Flying Probe and design your "bed of nails" test fixturing. In minutes Unisoft ProntoTEST-FIXT...
Unisoft ProntoSELECTIVE-SOLDERING software
ProntoSELECTIVE-SOLDERING is used by electronic manufacturers to quickly program their Selective Soldering machines. ProntoSELECTIVE-SOLDERING helps program most popular Selective Soldering machines such...
Unisoft ProntoAOI - AOI Machines Programming Software
ProntoAOI is used by electronic manufacturers to quickly program their Automatic Optical Inspection (AOI) machines and X-RAY Equipment. ProntoAOI programs most popular AOI Equipment such as YESTech, Mirtec, Orbotech,...
Unisoft CELLS - Product Tracking MES Software
Affordable Manufacturing Execution System (MES), Shop Floor Automation and Integration Software CELLS WORKFLOW Product Tracking MES is an affordable full Manufacturing Process Control Software System providing Plant Intelligence fo...
Unisoft ProntoVIEW-MARKUP - Assembly CAD Viewer & Gerber Viewer Software
ProntoVIEW-MARKUP is assembly CAD Viewer & Gerber Viewer software used by electronics manufacturers to quickly find components, pin, shorts between traces, etc. ProntoVIEW-MARKUP is also a redline tool that allows annotation of the as...
PCB Electronics Manufacturing Automation Software for EMS, OEM & ODM manufacturers. Over 3000 customers worldwide!
Milford, Connecticut, USA
PCB Design Support
At XPCB, we specialize in providing holistic Design for Manufacturability (DFM) engineering support tailored to your PCB projects. Our experienced engineers work closely with you from the earliest design stages to identify potential challenges and en...
Flexible PCB
XPCB Limited is one of the leading flexible PCB suppliers in China. We fabricate and assemble the most complex flexible circuit boards for harsh applications, including Oil&Gas, Medical, Security, and Aircraft & Satellite. Lay...
Rigid-flex PCB
Looking for a rigid-flex PCB manufacturer who can handle your most complex designs with speed and precision? Look no further. XPCB LIMITED is one of China's leading providers of high-quality rigid-flex PCB fabrication. ...
RF – Radio Frequency PCBs
XPCB is your trusted partner for high-performance RF PCB manufacturing, from prototype to mass production. We specialize in delivering exceptional quality and precision for demanding applications: Advanced Materials Expertise:...
XPCB is a PCB manufacturer with superior expertise in multilayer rigid-flex PCB and flex PCB, supporting special technology including VIPPO, stacked vias, buried vias, blind vias, unsymmetrical structure, and air gap structure.
Shenzhen, China
Morel Router CMQ360 PCB seperator
Morel Router CMQ360 PCB seperator ...
Automatic V-Groove PCB Cutting Machine HMF505
Automatic V-Groove PCB Cutting Machine HMF505 Feature 1. The microcontroller control the blade, operation is simple and convenient. 2. Infrared light curtain induction and protection tool doubl...
Automatic online IR curing oven
Automatic online IR curing oven Features ▶ Chain conveyor mode, the width between the chains can be adjusted between 50-450mm, to meet the customer's multiple connectionmethods, the chain us...
Automatic online glue dispenser HMH830D
Automatic online glue dispenser HMH830D 1. X, Y, Z three-axis motion, accurately realize the selective spraying process of various circuit boards to avoid non-coated areas such as connectors. 2. Accurately realize the selective...
PMP-816SII
IN-CIRCUIT TESTER PMP-816SII Feature ▶The instructions are synchronized with the screen results ▶Equipped with Safety Light Curtain ▶Flip door, More convenient operation ▶Double hydraulic lever, Mor...
YS-IH882 with Empty chip detection
Component Counters / SMD Counters
Broader scope, the latest ultra-small SMD components (01005) count, the series is as follows: These are the components package specifications. Functions: 1, Empty chip det...
Fully automatic PCBA cleaning machine-SMS-5600
Fully automatic PCBA cleaning machine-SMS-5600 1. Comprehensive cleaning, which can thoroughly clean the residual rosin flux, water-soluble flux, no-clean flux, solder paste and other organic and inorganic pollutant...
YAMAHA ZS/SS Feeder
YAMAHA ZS FEEDER YAMAHA ZS Feeder 8mm KLJ-MC100-000 YAMAHA ZS Feeder 12mm KLJ-MC200-000 YAMAHA ZS Feeder 16mm KLJ-MC300-000 YAMAHA ZS Feeder 24mm KLJ-MC400-000 YAMAHA...
Fully Automatic 2 Axis PCB Cutting Machine HML-850
Fully Automatic 2 Axis PCB Cutting Machine HML-850...
Morel Router CMQ360 PCB seperator
Morel Router CMQ360 PCB seperator ...
(1).jpg)
JUKI RX-6R Compact Modular SMT Mounter
JUKI RX-6R Compact Modular SMT Mounter Brand new Modular Mounter RX-6 debut -Combine High Productivitiy, High Flexiblity, High Quality Features ▶This is applicable to dual-lane production.*6 ▶Compac...
Automaitc splicing machine BMSE08
Automaitc splicing machine BMSE08 Features: It replaces manual labor to splicing,suitable for8m splicing Tape Splicing quality & the pass ratio are assurance,Helps improve production...
SMT Dual rail unloader BH-M-N
SMT Dual rail unloader BH-M-N Feature ▶ Sturdy structure. ▶ Easy-to-operate LED membrane switch or touch screen two control panels are available. ▶ The upper and lower pneumatic clamps can...
MLX6600 X-Ray Solution Microfocus X-Ray Inspection System Machine
MLX6600 X-Ray Solution Microfocus X-Ray Inspection System Machine X-Ray Solution MLX6600 Hardware technical parameters...
SMT Lead Free Wave Soldering Machine XMW-350
SMT Lead Free Wave Soldering Machine XMW-350 Wave soldering advantages: ▶Comprehensive: economical and power-saving type is suitable for various lead-free and lead-free processes. I...
Online SMT THT DIP AOI Machine AIS50X
Online SMT THT DIP AOI Machine AIS50X Principle Photograph the same board on the move with the upper and lower high precision cameras. Process image with Convolutional Neural Network (CNN) algorithm. Intelligently judge defects of co...
Intelligent SMD Component Storage System
Intelligent SMD Component Storage System Feature •Management is simple ▶Reduce manpower and improve efficiency ▶System control FIFO, eliminate human interference ▶Visual manage...
Two-axis PCB Separator
Two-axis PCB Separator ML-850 Features。 ● Suitable for verically designed PCB with V-scored groove. ● 49 sets of PCB data can be stored. ● PCB mat...
PCB CUTTING MACHINE CY-206
Board Handling - Pallets, Carriers, Fixtures
CY-206 knife type splitting machine adopts straight knife design under the upper round knife. When the cutting board is cut, the v-cut is placed on the lower straight knife, the circuit board does not move, the upper circular knife moves t...
AOI Automated Optical Inspection HMA
AOI Automated Optical Inspection HMA AOI Automated Optical Inspection HMA High efficiency: one maintenance workstation confirms the detection data of multiple online machines, realizing fully automated process control. AOI Au...
Focusing on the SMT field for more than 18 years, kinds of smt spare parts,like feeder ,nozzles,motors,fitlers and smt machine,juki ,panasonic ,yamaha,siemens,samsung(hanhua) ; peripheral equipment ,conveyor,AOI,spi,reflow oven
Shenzhen, Guangdong, China
C200 Pneumatic Crimp Tool
Cable & Wire Harness Equipment
Low Cost Table Top Crimp Machine. The C 200 is a table top low cost crimp tool which takes a variety of dies from different manufacturers. Air operated using standard factory air (5 bar min), with a pressing capacity of up to 1,200 kp,...
99-0012 - Pin Grid Array Extractors
Pin Grid Array Extractors are available in two sizes and provide a quick and safe way to extract Pin Grid Array components from their sockets. All component sizes can be accommodated, as the tool is available in two or four grip models. Adjusting...
F9004 - Side by side PCB transport racks hold up to 100 PCBs
Side by side stackable PCB transport racks for up to 100 printed circuit cards of up to 7.4" (190 mm) deep are made of antistatic material. Side plates can be adjusted from .7" (20mm) to 9.8" (250 mm). Specifications:...
FKN Systek K5000 - Multiple Blade Circular Blade PCB Depanelizer
FKN Systek K5000 - Manual board feed PCB multiple panel singulation Singulate panels with up to 10 scorelines. Singulate panels with components up to 2.5" 3 models available: - Output tray...
F9001 Quick Adjust Rack holds up to 50 PCBs
The F9001 quick adjust PCB Rack has been developed to provide a reasonably priced easy to adjust pcb carrier as an alternative to existing high priced products. The width of the rack can be quickly adjusted for different...
F9006 - L Shaped Trays 2 Sizes Hold 30 or 25 PCBs
These holding trays are designed to handle more flexible PCBs. Support on two sides prevents printed circuit cards from flexing or moving during transport. Available in two sizes to hold 25 or 30 PCBs. Specifications: S...
F9051 - Horizontal Stack PCB Transport Cart
The F9051 PCB Transport Cart has 3 shelves of card guides. Each level can hold fifty 11" long PCBs. The card guides are made of conductive material fo safe and convenient handling of PCBs during assembly. Additional shelves c...
FKN Systek K7000 - Thin Blade Circular-Linear Blade PCB Depanelizer
FKN Systek K7000 - Compact PCB Singulator for Close Component Spacing K7000 Singulates panels with components up to .030" apart. Blades Made of Long Lasting High Speed Steel. Linear Blade 12...
N200 - Depaneling Punch for Round Tab Routed Boards
Low Cost Punch For Singulation Small Tab Routed Panels N200 singulates one tab at a time with upper and lower pinch blades. Singulate curve routed and odd shaped boards. Top and bottom knif...
FKN Systek S200 Automatic Single Line Depaneling Saw
The FKN Systek S200 is a semiautomatic diamond blade depaneling saw which will cut a populated PCB panel one line at a time. The operator places the panel onto the input tray and positions the cutting line over the blade travel path...
R100 Benchtop PCB Depaneling Router
Safely Singulate Tab Routed Panels - With Dust Extraction Finish routing a tab routed PCB for singulation is a relatively slow process . However, in some cases, where the board contours and sensitive or overhanging components may requi...
F9055 - Transport Trolley Holds 200 to 400 Panels.
Made of anti electrostatic material, this PCB transport cart is sturdy and durable. The cart is good for moving large quantities of heavy boards. Specifications: Size: ( F9054 = 850x550 x1300 mm) - ( F9055 1200 mm x 550...
TDK PCB Transport Racks
Low Cost PCB Transport Racks for up to 50 Printed Circuit Cards of up to 18" (460 mm) deep are made of antistatic material. Side plates can be adjusted from 5.9" (150mm) to 13" (330 mm).Use in TKD Inserter. Specifications:...
F9000 Modular PCB Carrier Magazine
The basic unit for these PCB racks holds 32 boards up to 6.7" (170mm) long. Modules can be assembled side by side to hold longer Printed Circuit Cards. Standard extrusions allow card width of 0 to 10.25". For wider cards, extrusions can...
FKN Systek K3000 - Manual Circular-Linear Blade PCB Depanelizer
FKN Systek K3000 - Singulate scored and skip scored panels up to 24" long ESD protective mat on back table Adjustable front and back support table Singulate panels with components up to 2.5" high...
N400 - Singulate Tab Routed Panels In One Operation
For faster singulation of odd shaped tab routed panels we have developed the N400. This machine uses national brand Die sets with FKN custom tooling to singulate one panel at a time, or to singulate an entire matrix in one operation...
K4000 L36
The K4000L36 is a motorized linear blade depanelizer to singulate V-Scored PCBs. The K4000 is available in versions able to singulate 18", 24" 36" and 48 " panels. The K4000 L18 and...
FKN Systek N115 Nibbler
Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N115 Nibbler from FKN Systek. Two sharp support blades on either side of the tab help cleanly slice the PCBs from the tabs. The bl...
FKN Systek K4000 - Motorized Linear-Circular Blade PCB Depanelizer
The FKN Systek K4000 motorized linear blade depanelizer is designed for high volume singulation of scored and skip scored Printed Circuit Boards. No programming necessary. (Switch select operating mode and speed) Sing...
S300 - Multiple Blade PLC Controlled PCB Depaneling Saw
Cut panels without scoreline and with overhanging components. The S300 diamond blade depaneling saw is ideal for use in singulating assembled PCBs. Singulate panels up to 12" wide. Mic...
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
Millis, USA
IPC Training & Certification
IPC's Professional Development department sponsors certification programs for acceptability of electronics assemblies; soldering; repair/rework; and acceptability of printed boards. In addition, a wide variety of video and computer based tr...
IPC Market Research
The Electronics Industry’s Source of Data and Insights for Smart Business Decisions. The IPC Technology Market Research Council offers members unique and customized research for the electronics assembly industry. Network with...
IPC Standards
IPC standards, the results of industry consensus and collaboration, are respected throughout the whole world. Using IPC standards allows manufacturers, customers and suppliers to speak the same language....
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
MARCH PRODUCTS
Advanced Plasma Cleaning Systems, Solutions and Expertise for Multiple Manufacturing Industries MARCH Products is the global leader in advanced plasma surface treatment for semiconductor and electronic component manufacturi...
ASYMTEK Products
Fluid Dispensing and Conformal Coating Solutions for Diverse Applications and Industries Nordson ASYMTEK supplies fluid dispensing and PCB conformal coating equipment that is supported by a global service network. Recognized for our...
SELECT PRODUCTS
Selective Soldering Equipment and Solutions for Printed Circuit Board Assembly Nordson SELECT supplies selective soldering systems that are supported by a global service network. Recognized for our innovative products, we o...
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
Carlsbad, California, USA
Juki Pick and Place Equipment
Lewis and Clark is the leading provider of Juki Pick and Place equiment. Try out our Feeder Frenzy Depot for all of your Juki Feeder and Feeder Repair needs!...
Heller Reflow Ovens
Lewis and Clark's carries the largest inventory of pre-owned Heller Reflow Ovens! Ready to sell your Heller Reflow oven? Let us know! We are always looking to buy~...
Fuji Pick and Place Equipment
We buy and sell a majority of all Fuji Pick and Place Machines! With our Feeder Frenzy depot dedicated to the sale of quaility pre-owned Fuji feeders and repairs...
Siemens Pick and Place Equipment
Lewis and Clark is the industry leader in pre-owned Siemens Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your Siemens Feeder needs and Feeder repairs~...
Samsung Pick and Place
Lewis and Clark is the industry leader in pre-owned Samsung Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your Samsung Feeder needs and Feeder repairs~...
Mirae Pick and Place
Lewis and Clark is the industry leader in pre-owned Mirae Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your preowned Mirae Feeder needs and Feeder repairs~...
Universal Instruments -UIC Pick and Place Equipment
#1 Stop for all of your Universal Instruments Pick and Place needs Visit our Feeder Frenzy depot to load up on quality pre-owned feeders and feeder repairs~...
Vitronics Soltec Reflow Oven
Lewis and Clark offers the largest variety of quality pre-owned Vitronics Soltec Reflow Ovens! Ready to sell your Vitronics Soltec Reflow Oven? Let us know! We are always looking to buy~...
Glenbrook Test Equipment
Glenbrook test equipment for sale, X-ray equipment....
Speedline MPM Screen Printers
Lewis and Clark, Inc. home to the largest inventory of pre-owned Speedline MPM Screen Printers....
Assembleon / K&S Pick & Place Equipment
Lewis and Clark is the industry leader in pre-owned Assembleon / K&S Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your Assembleon / K&S Feeder needs and Feeder repairs~&...
MVP AOI
Lewis and Clark, Inc. has the largest pre-owned inventory of MVP AOI systems....
PVA Conformal Coating Sytems
Lewis and Clark, Inc. offer the largest variety of PVA conformal coating equipment. Ready to sell your PVA conformal coating machine? Just let us know, we are ready to buy!...
DEK Screen Printers
Lewis and Clark, Inc. has the largest inventory of quality pre-owned DEK Screen Printers....
.png)
Lewis and Clark is your #1 Pre-Owned Surface Mount and In-Circuit Test equipment supplier. We offer a variety of equipment solutions at a significant cost savings over new.
Nashua, New Hampshire, USA
JUKI RS-1R Next Generation Smart Fast Modular Mounter
JUKI RS-1R Next Generation Smart Fast Modular Mounter Model JUKI RS-1R Pick and Place Machine Conveyor Specification standar...
Domestic 8DOB LED Multifunctional Placement Machine
Domestic 8DOB LED Multifunctional Placement Machine Features: >Equipped with the nozzle library exchange station, the size of the material can be mounted by a single machine. >Standard pallet material station, braided...
Refurbished YAMAHA YV100xg Pick and Place Machine
Refurbished YAMAHA YV100xg Pick and Place Machine Machine Type YV100XG Substrate size M type L460 * W335 (MAX)...
KSUN R05 JUKI Feeder Calibration
KSUN R05 JUKI Feeder Calibration It is essential for this equipment that enhanced productivity , installation and quality improvement As the high efficiency vision camera is asked in order to investigate precisely and repair the er...
KSUN 460 Automatic Sucking Loader
Model No: KSUN 460 Automatic Sucking Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A...
KSUN 390 NG/OK un loader
product instruction ※PLC control system, Working is stably and reliably ※Easy to operate touch screen control interface ※the pneumatic clamps of top and bottom three point provided for the magazin...
KSUN 350H Dual Track Conveyor
Model No: KSUN 350H Dual Track Conveyor Power supply: 100-230V AC (customized), single phase Power load: MAX 100V/A Transport direction: Left to right/right to left(optional) Transport height:&n...
KSUN 390 Automatic un Loader
Model No: KSUN 390 Automatic un Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A...
KSUN 6004-S Telescopic Gate Conveyor
product instruction ※ Easy to operate touch screen control interface ※Telescopic structure, width adjustable, easy to walk ※ Photoelectric sensors with protection, more secure ※ Smooth and paral...
KSUN 250H Automatic Dual track un loader
Model No: KSUN 250H Automatic Dual track un loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A...
Inspection Conveyor （1.2M）
technical parameter： Model 1200 Track length...
KS330 Automatic Sucking Loader
Model No: KS330 Automatic Sucking Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A Air press...
KSUN 350 Automatic PCB Inverter
product instruction ※ Stable and reliable integrated control system ※ Easy to operate touch screen control interface ※Using cylinder flip, quick, smooth, precise alignment ※Buffer deceleration design more...
lead-free meter controls the hot air reflux soldering machine in the eight temperature zone
Type no. K-MA8835 Heating parameters Number of heating zones On 8 August Length of heating zone...
SMT Chip Mounter YAMAHA YS12F Compact Economy Flexible machine
SMT Chip Mounter YAMAHA YS12F Compact Economy Flexible machine Machine Type YS12F Applicable PCB L510mm x W460mm to L50mm x W50m...
Refurbished Yamaha YV100 ll Pick and Place Machine
Refurbished Yamaha YV100 ll Pick and Place Machine Machine Type Automatic pick and place Brand Name Yamaha Machine Model...
KSUN 460 Automatic vacuum loader
Model No: KSUN 460 Automatic vacuum loader MAX PCB`s capacity: 300pcs (0.6mm thickness PCB) cycling time: Approx 6 seconds Power supply: 100-230V AC (customized), single phase Power l...
KSUN SMT 0.5M/1M/1.2M Link Conveyors
Kingsun SMT 0.5M/1M/1.2M Link Conveyors Company promotional activities : lowest discount price with highest quality, factory large supply, welcome inquiry.( Can be customized) www.ksunsmt.com # Smt-Line # One-stopSolution#Manu...
KSUN 460S Accordion conveyer
product instruction ※Stable and reliable integrated control system ※Floding down and special air circuit design. lifting speed smoothly ※ Smooth and parallel width adjustment &...
Semi Auto PCB Solder Paste Printer
KSUN Semi Auto PCB Solder Paste Printer Specifications : SMT Stencil Printer Machine Working area: 300*400-300*400mm(300*600mm,300*1200mm) Frame size: 370*470mm,420*520mm,550*650mm,1500*650mm PCB thickness: 0.2...
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
Dongguan, China
Consultant / Service Provider, Distributor, Equipment Dealer / Broker / Auctions, Manufacturer, Manufacturer's Representative
DJ-9500 DispenseJet High-Speed Jet Dispensing
The DispenseJet DJ-9500 supports a long list of jettable fluids for a wide range of applications. Incorporating over 15 years of jetting experience, the DJ-9500 jet provides even more capability than its DJ-9000 predecessor. Nordson ASYM...
Viscosity Control System
The Viscosity Control System maintains consistent temperature of conformal coating fluids. The system includes a heated recirculating fluid circuit to eliminate viscosity changes in temperature-responsive materials. Close-range temperature monitor...
Forte - Advanced Dispenser
The Forte™ Series delivers exceptional dispensing productivity and accuracy for high-volume consumer electronics manufacturing, printed circuit board assembly, flexible circuit, MEMs, and electromechanical assembly applications. Next...
Fids-on-the-Fly High-Speed Fiducial Capture
Nordson ASYMTEK’s Fids-on-the-Fly™ option is up to 5.5X faster than the traditional stop-and-capture mode for locating fiducials. Reducing time spent performing this essential, non-dispense routine can increase UPH as much as...
DV-03HPA High Pressure Valve with Suckback
The DV-03 is a air-actuated balanced spool valve for consistent dispensing of high viscosity fluids. For precision, you can control the amount of fluid dispensed by adjusting the fluid pressure, pulse time, and selecting the appropriat...
DV-8000C Heli-Flow Pump
The DV-8000C series Heli-Flow® pumps are the newest generation of encoded auger pumps. The pump has a fixed-head design for luer needle applications. The DV-8000 pump's rigid head and fluid path can withstand high pressures generated by t...
DJ-2200 DispenseJet Non-Contact Flux Jet
Flux application using the DispenseJet® pump is a superior alternative to screen printing and ultrasonic spray. Jet dispensing eliminates the overspray and material waste associated with ultrasonic and spray application methods. Flux...
ASYMTEK Select Coat SL-1040 Conformal Coating System
With the Select Coat® SL-1040, we’ve retained the time-tested functionality of the Select Coat SL-940 and added significant system-level advancements to elevate automation, control, precision, and preventative maintenance for better yiel...
Vantage - Advanced Dispensing for Precision Packaging and Assembly
Our most advanced dispensing platform for electronics manufacturing The Vantage® Series is specifically designed for high-end advanced semiconductor package, electromechanical, and printed circuit board assembly. Create...
Panorama - Automated Conformal Coating Line Solutions
Nordson ASYMTEK designs automated conformal coating line solutions to fit your production process. Every Panorama™ line we build, includes the right balance of equipment and process control for optimal coating efficiency. If you&rs...
Spectrum II S2-900 Series Fluid Dispensers
The world-class precision and quality Spectrum® II system for assembly of mobile electronics, semiconductors, MEMS, and PCBs High Speed, High Accuracy, Precision Dispensing System. Higher consistency leads to higher...
Select Coat SL-940 Conformal Coating System
The Select Coat® conformal coating machine provides the highest productivity and quality for your automated coating processes. Automate your conformal coating with state-of-the-art process controls, world-leading know-how, exp...
Quantum™ Q-6800 In-Line, Large-Format Fluid Dispensers
ASYMTEK Quantum Q-6800 High-Value Fluid Dispensing System. ASYMTEK Quantum Q-6800 Series. A high-value fluid dispensing solution for demanding applications. Large dispense area (423 x 458 mm) for varied substrate sizes...
ASYMTEK NexJet NJ-8 Jetting System with ReadiSet Jet Cartridge
The NexJet® 8 Jetting System with patented ReadiSet™ Jet Cartridge offers increased jet frequency combined with advanced consumable management - it's as easy as ReadiSet and Jet. ReadiSet Jet Cartridge reduc...
EasyCoat 6 Conformal Coating Software
EasyCoat® 6 software for conformal coating systems delivers intuitive visual programming Nordson ASYMTEK's EasyCoat® software provides precise conformal coating with process control, traceability, and intuitive visual program...
Select Coat Conformal Coating Applicators - SC-350 Select Spray and the SC-300 Multi-Mode
The Select Coat Applicator Series – which includes the SC-350 Select Spray and the SC-300 Multi-Mode – is a highly-versatile conformal coating applicator that supports a wide range of fluid viscosities and is ideal for solvent or...
ASYMTEK SC-450 PreciseCoat Jet
Get more precision, process options, useability, yield, and uptime with the SC-450 PreciseCoat® conformal coating jet. The SC-450 PreciseCoat conformal coating jet widens the viscosity range to provide more process options. It's...
Qadence Flow Control for Conformal Coating
The ASYMTEK Qadence™ closed-loop flow control system maintains a stable flow rate by volume for high quality conformal coating results – automatically compensating for viscosity changes related to temperature, humidity and batch-to-bat...
DV-7000 Heli-Flow Pump
The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver epoxy. The dispense gap is mechanically controlled by the...
DV-07 Adjustable Liquid Metering Valve
The DV-07 is a normally closed, air-actuated diaphragm valve The DV-07 dispenses low to medium viscosity fluids for a variety of applications from microdots to volume fill. The DV-07 valve tol...
ASYMTEK Products | Nordson Electronics Solutions
A leader in automated fluid dispensing, jetting, and conformal coating. Products include stand-alone dispensing workstations and fully automated, in-line conveyorized systems with advanced process controls.
Carlsbad, California, USA
PCB magazine loader machine
PCB board handling equipment for automated assembly of PCB’s. ASCEN PCB magazine loader machine is used for providing pcb to following machine according to producing requirement in the starting process of on-...
insertion machine tube feeder
ASCEN insertion machine tube feeder is a SMT DIP part feeding machine, It can use to SMT mounter for automated online feeding or connect the robot for automatic production for replace the artificial....
PCB assembly conveyor
PCB assembly conveyor and PCB link conveyor and PCB conveyor are used for electronic assembly,equipment linking, visual inspection, SMT manual assembly, and PCB buffering functions. Their advantage is the short length, which allows them to b...
non-woven mask making machine
Automatic outer ear loop non-woven mask making machine is automatic from material feeding to mask collection.High automation in ear-loop welding, edge wrapping, counting and material discharging. Ultrasonic technique does n...
Melt-blown fabric medical face mask welding machine
This Melt-blown fabric medical face mask welding machine is to put 3-7 mm wide elastic belt on the both sides of the face mask blank by the ultrasonic welding.Only 1 operator is needed to put the face mask blank on the mov...
face mask manufacturing ear loop welding machine
After finish the mask blank by face mask making machine and into the next processing,the face mask production need use face mask manufacturing ear loop welding machine For non woven mask ear&n...
NG OK magazine SMT unloader
PCB magazine unloader and NG OK magazine SMT unloader is connected to the back of AOI and has horizontal movement and go-through functions,The OK and NG PCB after being tested by AOI can be separated and sent to the PCB racks, so that t...
pcb stacker push up stacker
PCB stacker and automatic PCB stacker and PCB bare board loaderand PCB bare board loader as the pcb loader machine with the ESD belt and CE certify, it can save more space than the pcb magazine loader in the smart factory...
PCB shuttle conveyor
PCB shuttle conveyor and PCB-Shuttle-Förderer and PCB traverser are used to connect dual lane with single lane equipment in the production line, and also can be used as a fixed rail changer for the PCB intelligent assembly line...
smt line loader
smt line loader is used at the starting of the SMT production line for loading of PCBA to the line Description: 1) Machine Size(L*W*H):1700*780*1200...
PCB Magazine NG/OK Unloader
PCB magazine unloader and PCB Magazine NG/OK Unloader is used to receive SMT circuit board in DIP production line,After AOI machine, receive the signal given by AOI, If you want know more solution for the SMT manufac...
automation face masks manufacturing equipment
The automation face masks manufacturing equipment is automatic from material feeding to mask collection 1.high automation with PLC, photoelectric detection for the raw material feeding to avoid...
NG reject PCB conveyor
NG Reject PCB conveyor is designed for good/bad PCB separation. It can also be used when visual inspection of the PCB is required without interrupting the PCB flow. The PCB is lifted up from the conveyor by metal fingers, enabling the follow...
PCB magazine loader
ASCEN Multiple Size SMT Magazine Loader PCB Loader This PCB loader is used for loading of PCBs from the SMT/LED intelligent production line. The more detail and video...
PCB magazine loader machine
This is PCB magazine loader machine,PCB automatic Loader,pcb loader, pcb magazine loader, pcb auto loader as SMT line automatic magazine loader machine that feeds PCBs into the Process Line from Stacks or Magazines....
full auto image measuring instrument
The full automatic vision measuring instrument has three ways of manual measurement,CNC scanning measurement and automatic learning measurement, and the three modes of modules can be superimposed for compound measurement. It can be...
Automatic SMT destacker
SMT destacker and automatic PCB destacker and SMT stacking unloader is transfering on the electronic assembly line. it can continuously jacking up the PCB board from the belt conveyor one by one and finish unloading operation...
3D Vision Measuring Machine
Application: The 3D Vision Measuring Machine can be applied to a variety of molds, aircraft, cars, mobile phones, computers, hardware, plastics, electronics, die-cutting, screen printing, LCP film, PCB, FPC, Cove...
PCB loader machine
PCB loader machine is used at the starting of the SMT production line for loading of PCBA to the line Description: 1) Machine Size(L*W*H):1700*780*1200...
PCB cutting machine|pcb depanelizer
PCB separator with circle knife above and anvil blade below, when the board flow to the anvil blade, shift the switch, and the anvil blade move laterally to the set point, then the PCB board is cut off with smooth incision and...
Manufacturer of automated production systems;PCB magazine loader,PCB separator,PCB cutting machine,PCB unloaders, PCB conveyors,PCB depaneling machines,PCB turn conveyors,PCB conformal coaters,PCB solder paste printer,PCB buffer
Dongguan, Guangdong, China
Heavy Gauge Electrical Insulation
ORION has emerged as a leader in the fabrication of heavy gauge electrical insulation products. We route many materials such as TW Formex®, Statex®, GE's Lexan®, and acrylics. Their typical thicknesses is between 0.060" and 0.25&...
Filters and Screens
Orion provides flexible, polyurethane filter foam to remove dust and contaminating particles from the air, gases and liquids in a variety of applications. The open pore skeletal structure provides low air resistance ideal for use in computers, ele...
Waterjet Cutting
Waterjet allows for improved cutting tolerances, improved lead times and the ability to provide highly complex geometry. Using a stream of water with forces of 55,000 PSI yields fast production rates and tool free cutting. Our single hea...
Gaskets and Seals
Orion Industries Inc has over 35 years experience in the design and manufacture of high performance gaskets and seals. We fabricate parts from open cell sponge, closed cell sponge, and solid, dense gasketing materials. We also manufactur...
CNC Routed Plastics, Electronic Insulation Products
Through the process of CNC routing, we are able to cut with precision electronic insulation products including thicker gauge materials. We also process composite materials such as G-10, FR4 and other materials that are not easily...
EMI/RFI Shielding Laminates
To shield against emissions, there must be a barrier of an electrical conductive material. Shielding laminates provide an economical and effective solution to this problem. Most of our materials consist of a metal foil (usually, copper o...
Formed Plastics Products
Formed parts are used for electrical insulation, such as snap-in-place housings, protection of high voltage parts, or covering bus bars. Plastics Forming Methods: Heated line bending...
Laser Cutting Services
Our Preco FlexPro CNC laser cutting system provides the speed of galvanometer processing with all the versatility of an XY motion system. Orion has the capability to cut detailed parts more precisely, and with shorter lead-times than conventional...
Die Cutting, Stamping
Orion has high-speed die cutting presses ranging from 1 to 60 tons. We also have stamping presses that range from 1 to 60 tons. Our other Die cutting capabilities include: Production parts up to 60&qu...
Thermal Transfer, Thermal Interface Materials
We are well versed in the following thermal application materials: Sil-Pad thermally conductive insulators Gap-Pad thermally conductive gap filling material ...
ORION provides innovative solutions to our customers' EMI/RFI Shielding, Insulating, Screening and Sealing needs in a broad spectrum of manufacturing environments.
Ayer, Massachusetts, USA
ISVI Razor High-Resolution Industrial Cameras, CMOS, 5120x5120, 4.5 pixel size
The RAZOR series cameras incorporate the most popular sensor resolutions with the ultimate in image performance, frame rates and economy. With scalable 1, 2 or 4 output links, RAZOR...
CoaXPress High Resolution Industrial Cameras
The CoaXPress series cameras operate 72fps with ZERO-ROT function at 8bit/10bit CXP-6 4CH It provides advanced technology of vision solution Sensor : 25MP Color & Mono CMOS Sensor (Global & Rolling Shutter)...
CameraLink High Resolution Industrial Cameras
The CameraLink industrial digital cameras offer high performance in a very small footprint. The advanced 25M color CMOS sensor provides the absolute best image quality at an incredible frame rate of 30 fps! The camera Link Interface ensures High s...
ISVI - Industrial Sensor Vision International Corporation
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
Oxford, Connecticut, USA
YAMAHA YG200 Refurbished High Speed SMT Pick And Place Machine
YAMAHA YG200 Refurbished High Speed SMT Pick And Place Machine Applicable PCB L330×W250 mm to L50×W50 mm Through-put...
Semi Auto PCB Solder Paste Printer
Semi Auto PCB Solder Paste Printer Model 500mm 800mm 1200mm 1500mm Direction Left → Right,...
KINGSUN SMT Linking Conveyor
KINGSUN SMT Linking Conveyor Power supply 100-230V AC (customized), single phase Air pressure 4-6 bar Transpo...
KINGSUN Automatic Loader and Unloader
KINGSUN Automatic Loader and Unloader Model 250 330 390 460 PCB loading time Approx 6 seconds...
Vitronics MR 933 Lead free Reflow Oven
Vitronics MR 933 Lead free Reflow Oven “DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD” provides overall solutions for SMT equipment and 3C intelligent factories. Professional electron...
Panasonic Refurbished CM402-L Modular Super High Speed SMT Machine
Panasonic Refurbished CM402-L Modular Super High Speed SMT Machine PCB dimensions (mm) L 50 x W...
DEK Horizon 03iX Automatic SMT Solder Paste Printer
DEK Horizon 03iX Automatic SMT Solder Paste Printer Model Horizon 03iX Operating System Win XP+09sp13 or up PCB support T...
JUKI KE2070L High Speed Chip Shooter SMT Machine
JUKI KE2070L High Speed Chip Shooter SMT Machine Board size M size (330×250mm)...
Dongguan Kingsun Automation Technology CO., Ltd
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
Dongguan, Guangdong, China
듀얼 레인 / 이중 온도 리플로우 오븐 - 1910 MK5
듀얼 챔버 모듈 - 듀얼 챔버 + 듀얼 블로어 + 듀얼 히터 + 듀얼 T/C 두 갈래로 나뉘어진 듀얼 레인 / 이중 온도 리플로우 오븐 챔버가 동일 리플로우 오븐 풋프린트에서 2개의 다른 열 프로파일이 동시에 운행될 수 있도록 합니다. 두 갈래로 나뉘어진(듀얼) 기능...
Heller 788 인라인, 지속적 큐어, 수직형 포맷 오븐
생산성 향상, 품질 개선, 비용 절감은...Heller의 수직형 포맷 큐어링 솔루션과 함께. 에폭시 큐어 공정의 인라인, 수직형 자동화가 세 분야에서 즉각적이고 유의미한 혜택을 제공합니다. 인라인 자동화는 배치 오븐의 적재 및 하적에 필요한 노동을 없애 생산성을 증대합니다. 이는 배치 오븐 도...
860 가압 큐어링 오븐(PCO)
다이 어태치 및 언더필 가압 큐어링 오븐 가압 큐어링 오븐(PCO) 또는 오토클레이브는 일반적으로 다이 어태치 및 언더필 애플리케이션에서 사용되는 접착 공정에서 보이드를 최소화하고 접착강도를 증대시키기 위해 사용됩니다. PCO pressurizes air into a rigid vessel and heats & coo...
1936/2043 Mark 5 – 리플로우 오븐 시스템
가장 빠른 픽앤플레이스 시스템을 제공하는 분당 1.4M의 최대 벨트 속도를 갖춘 최강의 대량 리플로우 오븐 시스템. 무납 인증! 유지관리 불필요! 최저의 질소 & 전기 사용! 무료로 제공되는 통합 Cpk 소프트웨어!...
1809 MK5 - Heller 고급 인라인 무보이드 / 진공 리플로우 솔더링 오븐
9개 존을 갖춘 무보이드 진공 리플로우 솔더링 오븐. 균형적 흐름 기술이 있는 무보이드 / 진공 리플로우 솔더링 질소 시스템 9개의 탑 및 바텀 가열 존 - 업계 최고의 직선형 피트당 최고의 존 수! 100인치 가열 길이 - 고처리율 제공! 2개의 내부...
무플럭스 리플로우 솔더링을 위한 포름산 리플로우 오븐 - 1936 MKV
포름산 증기에서의 무플럭스 포름산 리플로우 Heller는 포름산 증기를 위한 수평형 무플럭스 포름산 리플로우 오븐을 설계해 생산에 활용할 수 있도록 제작했습니다. 이 새로운 오븐은 세미(Semi) S2/S8 안전성 표준(유독가스 포함)에 적합하도록 설계되었습니다. 포름산은 무플럭스 솔더 리플로우에서 효과적인 환원제로 보여져 왔습니다...
Heller VCO 755 인라인, 지속적 큐어, 수직형 포맷 미니 큐어링 오븐
큐어링 에폭시의 수직형 자동화를 위한 소형 큐어링 오븐. 생산성 향상, 품질 개선, 비용 절감은...Heller의 수직형 포맷 큐어링 솔루션과 함께. 에폭시 큐어 공정의 인라인, 수직형 자동화가 세 분야에서 즉각적이고 상당한 혜택을 제공합니다....
대량 생산을 위한 컨벡션 리플로우 오븐. - 1826 Mark 5
세계 최고의 컨벡션 리플로우 오븐 대량의 요구에도 일관된 성능을 제공하는 동시에, 예방적 유지관리와 바닥면적은 최소화합니다 무납 인증! 유지관리 불필요! 최저의 질소 & 전기 사용! 무료로 제공되는 통...
고처리율 애플리케이션을 위한 세계 최고의 SMT 컨벡션 리플로우 오븐 - Mark7
뉴 MK7 플랫폼이 새롭고 획기적인 여러 디자인으로 리플로우 업계를 혁신하고 있습니다! MK7은 보다 낮은 델타 T, 질소 소비 절감 및 전체 생산 플로어의 관찰이 쉽도록 하는 새로운 저고 패키지로 PM 확장에 대한 모든 고객의 요청이 통합되어 있습니다. 생산을 위한 MK7의 강력한 장점을 직접 확인할 수 있도록 당사의 세 곳 중 어느 곳이든 방문해 프로파일을 수행하고 데이터를 수집해 보실 수...
-세계 최고 품질의 대류열풍방식으로 새로운 표준을 선도하는 HELLER Reflow Oven -10년 연속 World Wide Market Share 1위와 2014 SERVICE EXCELLENCE AWARDS 수상
Kyungki-Do, Kyonggi-do, South Korea
ZM-R730A BGA Rework Station
The ZM-R730A BGA Rework Station can place very small BGA's down to 0.1mm pitch, large BGA's up to 90mm on standard models and can be cusomized to place up to 130mm Chips. Currently the only machine available on the market with a robotic Vi...
.png)
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 17 X 17mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 17mm x 17mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more....
SRT BGA Rework Station Repair Services
BGA Rework Station Services for: SRT 1000, 1100, 1100HR, 2000 plus , Shuttle Star and Zhuomao Brands. Calibration Profile Set Up Computer Repair, and hard drive replacement. Used machi...
Solder Training and Solder Certification Courses
Solder Training and Solder Certification Courses Taught in Accordance With IPC Soldering Guidelines. We offer a variety of customized courses set up specifically for our customers requirements. An example would be our combination...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 38mm x 38mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 38mm x 38mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hands-On, Assembly, Rework, and Solder Skills Training Seminars
This new series of Hands-On Skills Training will focus on those seeking new employment skills, skills for job advancement and companies requiring industry certification for their employees. In consideration of the current economic situation,...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 45mm x 45mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 45mm x 45mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 36 X 36mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 36mm x 36mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more....
BGA Reballing Service
BGA Reballing and Solder Bumping for all types of SMD's Lead, Lead Free and Solder Alloy Conversion. Package types include but are not limited to:...
ZM-R720A BGA Rework Station
The Zhuomao ZM-R720A BGA Rework Station. Place SMD components as small as 0.2mm with this high resolution Hot Air Rework System. One of the most precise machines on the market at this affordable price. Call (888) 406-2830 for a...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 40mm x 40mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 40mm x 40mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
BGA Rework Station, Nitrogen Capable, Model E6250U
NEW! Nitrogen Capable for High Yield Lead Free BGA Rework. NEW! Movable top and bottom gas heaters allows for easy rework near the edge and hard to ger area's of large PCB's. For high volume BGA Rework...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 27mm x 27mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 27mm x 27mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 35mm x 35mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 35mm x 35mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 45mm x 45mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 45mm x 45mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Chip Quik SMD Rework Products
We are a distributor of Chip Quik SMD rework products. Call for pricing or check out our on line store: https://youtu.be/DBJ1MxqD3d0 (888) 406-2830...
BGA Rework Services
BGA Rework Services Offered BGA Remove and Placement Level Three Pad Repair Wire Add Trace Repair BGA Re-Balling BGA Inspection We...
BGA Rework Training & Certification
This course is designed for students that require the hands-on skill and knowledge to reliably remove and install many types of the most complex BGA components. Students are taught methods for safe and reliable BGA component rework using a top of...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 23mm x 23mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 23mm x 23mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 17mm x 25mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 17mm x 25mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Oroville, California, USA
Consultant / Service Provider, Equipment Dealer / Broker / Auctions, Manufacturer's Representative, Training Provider
LISA Modular Handling System
Compact designed machines to match perfectly different kind of modular operation process Key configuration : Tray in - Tray out Tray...
Tape & Reel Services For Standard or Non Standard SMD Components
We offer tape and reel packaging services for standard or non standard SMD components. We provide as well customized carrier tapes for special components designed at our customers specifications...
Tape & Reel Material
We supply the following material for tape & reel equipment : Pocket tape Cover tape Reels (all dimensions)...
AATEC LISA SPIDER XL
Our new LISA SPIDER XL pick & place machine is now available. Greater modularity More space for input / output medias - Trays IN /OUT - Tape IN - Tape OUT - Tubes IN /OUT...
ARC Automatic Reel Changer
Ready for Industry 4.0 ARC - Fully Automatic Reel Changer Stand alone module to be integrated on any Tape&Reel machine output Option : Automatic Sticker labelling Option...
3D inspection machine
Compact designed machines to match perfectly different kind of modular operation process Key configuration : Tray in - Tray out...
LEVIO Contactless Touchless Pick and Place
Contactless touchless manipulation, no more contact and surface defects Flexible, easy to use, menu driven software, advanced mechanic and electronic characteristics, fully contactless manipulation capabilities....
MB872 Tape & Reel Module For Any Type of SMD Components
Reel input : Diam. 180 / 330 / 380 / 560 / 760mm (7 / 13 / 15 / 22 / 30 inches) Reel output : Diam. 180 / 330 / 380 / 560 (13 / 15 / 22 inches) Tape advance - stepper moto...
NANO Pick & Place Modular Handling System
This machine is especially designed for multifunction operations Key configuration: Tray in - Tray out Tray in - Tape out &...
PICO Modular Pick and Place System For Tape and Reel Packaging
Modular automatic pick and place machine featuring tape and reel module, bowl feeder and tube feeeder. Ergonomic, easy access, economic and easy to use Our standard input and output modules can be located all around the...
Tube Feeder Module For Any Type of SMD Components in Plastic Tubes
Basic module for 1 type of component Easy changeover kit for tube loader (1 for each component type) Tube height adjustable thanks to precision screw Maximum heig...
ARC Automatic Reel Changer V2
Our new automatic reel changer ARC V2 is now available. More compact and more economical, this new model will meet all requirements for optimizing the reeling process. Reel labeling and boxing with a flexi...
High Precision Mechanical Parts Manufacturing And Precision Dies
Milling Turning Grinding Honing EDM Wire cutting Heat Treatment Machining...
ATF - Automatic Tray Feeder
ATF - Automatic Tray Feeder Flexible, easy to use, advanced mechanic...
PICO II Pick&Place machine
New PICO II pick&place machine now available Media Input : Bulk Bowl feeder or Tube feeder Media Output : Tape & reel Vision inpsection UPH : up to 8'000 parts&...
Connector vision inspection machine
Connector vision inspection machines 2D - 3D integration Coplanarity inspection Tube or tray input Tape and reel output...
ARC - Automatic Reel Changer
Automatic Reel Changer - ARC Flexible, easy to use, menu driven software and...
TFA - Automatic Tube Feeder (TFA)
TFA - Automtatic Tube Feeder (TFA) • Basic module for 1 type of component • Cycle time : 1,5 seconds (1up feed) • Mounted on...
Automatic Tape & Reel
Automatic tape & reel equipment - manual tape and reel - fully automatic tape and reel including vision inspection...
Modular pick and place automation - tape and reel - tube feeder - coplanarity check - assembly machine - contactless pick and place
St.Blaise, Switzerland
Golden State Assembly - Wire Harnesses & Electromechanical Assemblies
Wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.), services (sorting, rework, value additive wire harness manufacturing engineering). Golden State Assembly is currently on the lookout...
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
Morgan Hill, California, USA
MVME51105E-2263
VME Processor Module Refurbished – Good Condition Manufacturer: Motorola Model: MVME 5100 Microprocessor: MPC7410, MPC750 or MPC755 with 32KB/32KB L1 cache DRAM: Up to 512MB of onboard ECC S...
MVME167PA-36SE
High-performance SBC Refurbished – Good Condition Manufacturer – Motorola 133 MHz MC68040 32-bit microprocessor with 8KB of cache, MMU, and FPU Full 32-bit master/slave VMEbus inter...
MVME55006E-0163
MVME5500 Single-Board Computer Refurbished – Good Condition Manufacturer: Emerson MPC7457 PowerPC® processor at 1 GHz 512KB of on-chip L2 cache and 2MB of L3 cache AltiVec coprocessor fo...
MVME167PA-34SE
High-performance SBC Refurbished – Good Condition Manufacturer – Motorola 133 MHz MC68040 32-bit microprocessor with 8KB of cache, MMU, and FPU Full 32-bit master/slave VMEbus inter...
We are your obsolete industrial product specialists. Our inventory includes VME, cPCI, ATCA, SBCs and much more industrial electronics
Hackettstown, New Jersey, USA
RF/IF and RFID
A reader, an electrical tag and data management system constitute an integrated RFID system. Radio Frequency Identification (RFID) is also regarded as a type of automatic identification technology. It carries out non-contact bidirectional data commun...
Resistors
A resistor is a two-terminal electronic component made of resistive material with a certain structural form that can limit the flow of current in a circuit. The resistance value of a resistance element is generally dependent on temperature, material,...
Integrated Circuits (ICs)
An integrated circuit is a circuit with specific functions that integrates a number of common electronic components, such as resistors, capacitors, transistors, etc., and the connections between these components through semiconductor technology. Thro...
Isolators
Isolators are a kind of linear optical coupling isolation principle that output and convert the input signal. The input, output and working power supply are isolated from each other. Isolator, also known as signal isolator, is an significant part of...
Capacitors
Sandwiched between a layer of non-conductive insulation, two conductors close to each other, which constitutes a capacitor. A capacitor is a component that stores charge, and its storage is called capacity. Capacitors can be generally divided into fi...
Memory Cards, Modules
In the integrated circuit, the circuit with storage function without physical form is also known as memory, such as RAM, FIFO, etc.; In the system, the storage device with physical form is also called memory, such as memory stick, TF card, etc. All t...
Sensors, Transducers
A sensor is a device that converts non-electrical quantities (such as temperature, humidity, light, magnetic field, sound, etc.) into electrical signals.Many types of sensors, mainly divided into physical sensors and chemical sensors. The physical...
Filters
Filter is a filter circuit consisted of capacitance, inductance and resistance. The filter can effectively filter out the frequency points of a specific frequency or frequencies outside the frequency point in the power line, and obtain a power signal...
Power Supplies - Board Mount
A power supply is a device that converts other forms of energy into electrical energy and supplies electrical energy to a circuit (electronic device). It provides the electrical energy needed by all the components in a computer. The size of power sup...
Connectors, Interconnects
Connectors is a device that connects two active devices to transmit currents or signals. Domestic connectors, known as the connector and socket, generally refers to electrical connectors. Essential performances of connectors and interconnects can be...
Discrete Semiconductor Products
A semiconductor is a material that conducts electricity between a conductor and an insulator at normal atmospheric temperature. Common semiconductor materials contains silicon, germanium, gallium arsenide, etc. Silicon is the most influential in the...
Crystals and Oscillators
Some electronic devices require AC signals with high frequency stability, while LC oscillators have poor stability and are prone to frequency drift. In the oscillator using a special element - quartz crystal, can produce a highly stable signal, the u...
Optoelectronics
Electronic displays refers to information display devices that use electronic technology to transform imperceptible signals into perceptible signals. Their characteristics include small-space occupancy, flexible display format, and simultaneously dis...
Circuit Protection
Circuit protection is to protect electronic components in the circuit mainly in over voltage, over current, surge, electromagnetic interference. With the development of science and technology, electric/electronic products have been increasingly diver...
Relays
A relay is an electrical control device that can give a specified amount of input and hold it long enough to make a predetermined change in the controlled amount in the electrical output circuit. When the input drops to a certain level and remains fo...
Distributor of hot-sales and hard-to-find electronic and electromechanical components and supplies. Online catalogue, data sheets and purchasing. win-source.net
SPOKANE, Washington, USA
SMT 松下/西门子/三星/FUJI/YAMAHA/JUKI/机器销售维修
According to the customer's requirements, there are slow and fast modes of transportation, and the quotation does not include shipping fees, which are free of charge in China.（运输方式按照客户的要求，有慢的，也有快的，报价不包含运费，国内免运费。）...
我们是一家来自中国的SMT供应商。我们长期供应SMT设备供料器及设备配件，包括松下、三星、雅马哈、富士、西门子、JUKI等。我们供应SMT吸嘴、SMT供料器、SMT机器。
Suzhou, Jiangsu, China
Batch - Inline - Stencil Cleaners
Batch - Inline - Stencil Cleaners - Speedline Electrovert, Trek, Stoelting, Unit Design, Aqueous Technologies, EMC, Smart Sonic Batch-Inline-Stencil Cleaners for sale at JMW Enterprises...
Parts Prep - Wire Strippers
Parts Prep - Wire Strippers - Hepco, GPD, Heller, Eubanks, Vtek Parts Prep-Wire Strippers for sale at JMW Enterprises....
Used SMT Screen Printers
SMT Screen Printers - DEK, MPM, Ekra SMT Screen Printers for sale at JMW Enterprises....
SMT Conveyors
SMT Conveyors - Conveyor Technologies, JOT, Simplimatic, ASYS, Flexlink SMT Conveyors for sale at JMW Enterprises....
SMT Spare Parts
SMT Spare Parts - Electrovert, DEK, MPM SMT Spare Parts for sale at JMW Enterprises....
Rework Stations
Rework Stations - Air Vac, SRT, Pace, Metcal, Conceptronic Rework Stations for sale at JMW Enterprises....
Routers - Depanelizers
Routers - Depanelizers - Cencorp, JOT Routers-Depanelizers for sale at JMW Enterprises....
AOI - Xray - Paste Inspection
AOI - Xray - Paste Inspection - Yestech, Viscom, Omron, MVP, Cyber Optics, GSI Lumonics AOI-Xray-Paste Inspection for sale at JMW Enterprises....
PCB Magazines
PCB Magazines - CAB, NIX, Simplimatic PCB Magazines for sale at JMW Enterprises....
Selective Soldering Machines
Selective Soldering Machines - Pillarhouse, Vitronics Soltec, ERSA, A.C.E. Production Technologies Selective Soldering Machines for sale at JMW Enterprises....
SMT Placement Machines
SMT Placement Machines - Fuji, Mydata, Universal SMT Placement Machines for sale at JMW Enterprises....
Reflow Ovens
Reflow Ovens - BTU, Electrovert, Heller, Vitronics Soltec Reflow Ovens for sale at JMW Enterprises....
SMT Feeders
SMT Feeders - Fuji, Siemens, Hover Davis, Mydata SMT Feeders for sale at JMW Enterprises....
SMT Adhesive Dispensers
SMT Adhesive Dispensers - Camalot, Nordson, Asymtek SMT Adhesive Dispensers for sale at JMW Enterprises....
Through Hole Machines
Through Hole Machines - Universal, Amistar Through Hole Machines for sale at JMW Enterprises....
Wave Soldering Machines
Wave Soldering Machines - Speedline Electrovert, Vitronics Soltec, Technical Devices, Ersa, Seho Wave Soldering Machines for sale at JMW Enterprises....
.jpg)
Buyer, Seller, Broker of Electronic Assembly Equipment
Rushford, Minnesota, USA
XT Humidifier
XT Series electrode humidifiers provide humidification for a wide range of buildings, including health care, commercial, industrial, and government facilities. Easy installation and cylinder replacement together with minimal maintenance make XT Serie...
CDS dehumidifier RL series
DriSteem is introducing a brand-new selection of refrigerant-based dehumidifiers available to ship within 5 business days or less. These units are an excellent fit for commercial applications and replacement opportunities. Dehumidification...
Hydrotrue® RO 200 Series Water Treatment System
Hydrotrue® RO 200 series water treatment system Designed for DriSteem equipment and stand-alone operation, the Hydrotrue RO 200 series reverse osmosis water treatment system...
Hydrotrue® Pre-treatment Systems
Hydrotrue water softener systems The easiest and most cost-effective way to maintain humidification capacity and to reduce maintenance requirements is to install a Hydrotrue water softener system. Operating with...
GTS® Humidifier LX Series
The GTS humidifier LX Series is the only gas-fired humidifier that combines the highest efficiency on the market with ultra-low NOx in a single design. Thermal (combustion) efficiency 94% Higher Heating Value (...
Adiatec® Ultrasonic Humidifier
The DriSteem Adiatec ultrasonic humidifier provides evaporative cooling and humidification in room or in AHU/duct for application flexibility. Ultrasonic units humidify using high frequency oscillation of piezoelectric transducers, causing mist to...
Hydrotrue® RO 400 Series Water Treatment System
Hydrotrue® RO 400 series water treatment system Designed for DriSteem equipment and stand-alone operation, the Hydrotrue RO 400 Series reverse osmosis water treatment system significantly reduc...
DriSteem provides reliable and efficient humidity control, evaporative cooling, and water treatment solutions for commercial and industrial applications.
Eden Prairie, Minnesota, USA
1936 MKV - 蚁酸回流焊炉
甲酸蒸气中无助焊剂的甲酸回流炉 Heller设计并制造了可用于甲酸蒸汽水平式无助焊剂甲酸回流焊炉。这款新烤箱的设计符合Semi S2 / S8安全标准（包括有毒气体）。 已证明甲酸是无助焊剂回流中的有效还原剂 卧式回流炉中的优异结果证明晶圆凸块应用...
1910MK5- 双腔4条轨道SMT 回流焊炉
双轨及双温度回流焊炉 双炉膛模组：双炉膛+双腔吹风马达+双腔加热模组+双腔独立温度测量监测 分岔功能 双炉膛模组 双轨 双导轨和双中央支撑系统...
1826MK5 - 适用于高产能的回流焊炉
世界一流的回流焊炉 为高产能需求，最小化保养所需时间及最小占地面积提供稳定的性能 无铅保证 免保养 最低的耗氮与耗电 免费的一体化 CPK 软件 随着最新的技术突破，HE...
860压力固化烤箱（PCO）
压力固化烤箱（PCO）或高压容器用于使空隙最小化并增加通常用于贴装附着和底部填充应用中的粘合工艺的粘合强度。 PCO将空气加压到刚性容器中，并通过强制对流加热和冷却。 加热器，热交换器和鼓风机位于压力容器内部。 固化过程完成后，压力固化炉会自动将压力降低到1atm并冷却。...
Heller 788在线、连续、垂直炉烤箱
Heller提供垂直炉烤箱用以提高生产效率、质量及降低成本的解决方案 这种升降模式的固化炉利用了垂直空间，适用于固化应用，最多可达4小时的固化时间，而占地仅有96“(2.5m) 的面积。极适用于填充和封装制成。 在线式垂直炉在固化树酯的制程中有显著的三大领域...
1809 MK5-Heller先进联机无气泡/真空回流焊炉
均衡气流技术的无气泡/真空回流焊氮气系统 9个顶部和底部加热区-业内每英尺拥有最高的区域数！ 100英寸加热长度-可提供超大产量！ 2个内部冷却区-提供最低的出口温度！ 总长度为180英寸-优化占地面积！ 带有10英寸模块的新型模块设计...
Heller 755在线连续式的垂直烘烤炉
小型化的垂直烘烤炉 Heller提供垂直炉烤箱用以提高生产效率、质量及降低成本的解决方案 在线式垂直炉在固化树酯的制程中有显著的三大领域 减少人员在生产过程中的上料及下料的时间浪费以提高生产效率 减少烤箱在开关门时所产生的温度...
1936/2043 Mark 5 – 回流焊系统
以高达1.4米/分钟的高链速为适应极限贴片速度提供了高产能需求解决方案。 无铅保证 免保养 最低的耗氮与耗电 免费的一体化 CPK 软件 1936与2043 MK5系列向人们展现了最高水平的炉温均温再现性。与Mar...
回流焊炉-Mark 7
适用于高产能的世界一流的SMT 回流焊炉 MK7系列具有多项革命性和突破性的设计。MK7系列结合客户需求，优化DELTA T，减少耗氮量，延长保养间隔时间。汇集各项优化功能的同时降低了机身高度，使视野更开阔。 HELLER欢迎您参观我们的研发中心和制造工厂，亲自在MK7的设备上做PROFILE测试，共同见证MK7系列的强大功能及优势。或者将您的产品寄给我们，我们会将PROFILE 的测试结果与您...
Lead-Free Solder Training
Blackfox’s Lead Free Soldering series minimizes the risks of conversion, and gives you the confidence to introduce lead free products and services quickly, with highest quality. The lead free certification program offers the latest requireme...
PRO-STD-001 Certification
Course for Counterfeit Component Detection and Prevention Blackfox and ProSkill CTG offers a unique and comprehensive course; PRO-STD-001 Certification, a meaningful Course for Counterfeit Component Detection and Prevention. Have your...
Hand Soldering Training
The purpose of these courses is to promote best manufacturing practices and enhance the individual’s job performance. These courses are indispensable for everyone involved in Electronics Manufacturing. Blackfox is widely recognized in the...
IPC Certification
IPC - Association Connecting Electronics Industries® offers globally recognized industry-traceable training and certification programs on key Electronics Industry Standards. Blackfox, founded in 1996, is the premier Worldwide Approved IPC T...
Blackfox Training Institute, LLC
Blackfox is the industry leader in providing IPC Certifications, Solder Training, Customized Training Programs, and Counterfeit Component Training and Certification.
Longmont, Colorado, USA
Consultant / Service Provider, Manufacturer, Standards Setting / Certification, Training Provider
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Odessa, Florida, USA
Feeders
We stock and trade in all type of SMT feeders. Fuji · ASM · Yamaha · Panasonic· ·Samsung · Universal· Label Feeders Vibratory Feeders Tray Feeders and Towers Feeders Fuji – Medidas: W08f, W12c, W16c, W24c, W32c, W44c, W56c, W72, W88. Feeder...
ESD Equipment
ESD Equipment For Sale Protect your sensitive PCBs with our wide selection of static control solutions. Reduce risks and costs associated with static electricity. We strive to provide the lowest cost and highest quality ESD accesories and factory s...
We are a global electronics manufacturing Solutions provider ....Our company supplies new and used SMT equipment, spare parts, consumibles, ESD supplies and services to a wide range of EMS companies.
Jalisco, Jalisco, Mexico
HDI PCB, High density PCB, High density interconnect PCB, HDI PCB Manufacturing -- Hitechpcba
HDI PCB Manufacturer & Assembly – One-stop services from China -HDI (high-density interconnection board) is a compact circuit board designed for small capacity users. Compared...
PCB Assembly, PCB Manufacturing, Electronic Assembly service -- Hitech Circuits Co., Limited
As leading one-stop PCB Assembly services provider in China, Hitech Group offers high quality, cost effective, express PCB board products and provides PCB manufacturing, electronics assembly manufacturing, components sourcing, Box build...
Electronic Manufacturing Services -- Hitech Circuits Co., Limited
Hitech Circuits has always been focused on electronic manufacturing services for over 15 years with much experience for design and production in the PCBA field. We provide one-stop services, including SMT mounting, plug-in (THT), electro...
IGBG Ceramic PCB, Ceramic circuit board, Alumina (Al2O3) Ceramic PCB, Aluminum Nitride (AIN) Ceramic PCB board -- Hitechpcb
We are a professional ceramic pcb manufacturer, supplier from China, we mainly supply high quality Alumina (Al2O3) Ceramic PCB, Aluminum Nitride (AIN) Ceramic PCB board and IGBT Ceramic PCB. Our ceramic printed circuit boards features of high pres...
 -- Hitech Circuits Co., Limited.jpg)
LED PCB Assembly
Hitech Circuits has been participated in hundreds and thousands of LED lighting projects, by providing LED PCB and also LED PCB assembly service. Our LED PCB assembly had covered both ends of the Lighting Class LED size spectrum,...
Rogers PCB, RF PCB, High frequency PCB
Choosing the appropriate material for your printed circuit board is a crucial decision that will impact its suitability for specific applications. Through this blog post, we aim to enhance your understanding of Rogers PCBs. If you require fur...
Aluminium PCB, MCPCB, Aluminum PCB, Metal core PCB, LED PCB, LED Circuit board
Aluminum PCB, or Aluminium PCB, also called Alu PCB, is one of Insulated Metal Substrate (IMS) PCBs, and is also one of the most commonly used Metal Core PCBs (MCPCB) nowadays. HitechPCB manufactures Aluminum printed circuit boards (PCB) with...
Flexible PCB, FPCB, Flexible Circuit board -- Hitech Circuits Co., Limited
Flexible PCB includes single sided FPC, double sided FPC and multilayer FPC, etc. Single FPC has chemically etched conductive pattern layer, the conductive pattern layer on the surface of the flexible insulating substrate is calendered copper foil...
RF PCB & Microwave PCB, Teflon PCB, Rogers circuit board -- HitechPCB
HITECH CIRCUITS has been providing RF PCB manufacturing facilities for years. The qualified professionals at HITECH CIRCUITS have expertise in Rogers PCB materials based PCB manufacturing. Fortunately, HITECH CIRCUITS has experienced RF Microwave...
Aluminum PCB; Metal Core PCB; LED PCB Circuit board -- Hitech Circuits Co., Limited
Aluminum PCB & Metal Core PCB & LED PCB Circuit board Aluminium PCB are metal-based, copper-clad laminates with a good heat dissipation function. Usually, Aluminium PCB is refer to LED PCB board, which is the...
Turnkey PCB Assembly Manufacturer, PCBA, SMT Assembly, THT Assembly -- Hitech Circuits Co., Limited
Turnkey PCB assembly & manufacturing is the optimal solution for engineers with urgent, high complexity projects who want to avoid project management headaches. Providing turnkey PCB assembly services means that the provi...
Printed Circuit Board Assembly Services, PCBA factory, PCB assembly service -- Hitech Circuits Co., Limited
Hitechpcb is an expert PCB manufacturing & assembly company that proudly supplies PCB assembly solutions to businesses of all sizes in China.Our industry-leading PCB assembly processes create PCBs of the highest quality. Our expert team...
Rigid-flex PCB, Rigid flex circuit board manufacturer, Flex rigid PCB -- Hitech Circuits Co., Limited
Rigid flex printed circuit boards (PCBs) are manufactured by combining rigid and flexible board technologies. These circuit boards are made up of multiple flexible circuit inner layers. An epoxy pre-preg bonding film is used to attach together the...
Heavy copper pcb board, Heavy copper printed circuit board, Copper PCB -- Hitech Circuits Co., Limited
Hitech is a professional heavy copper pcb, thick copper pcb board manufacturer, PCB power supplier from China, we have been associated with heavy copper pcb plating since 2000 and we have won good reputation in this ind...
Heavy Copper PCB, Thick copper PCB, PCB fabrication -- Hitech Circuits Co., Limited
Heavy Copper PCBs have a lot to offer. It has some unique features that make it ideal for high-end applications. Let's discuss some of the benefits of this PCB; • Great heat distribution: This PCB provides high thermal resistance due t...
Ceramic PCB, Ceramic PCB board, Ceramic substrate PCB, ceramic circuit board
Ceramic PCB board is also called ceramic substrate or ceramic circuit board, ceramic copper coated plate, ceramic substrate refers to the copper foil directly bonded to alumina (Al2O3) or aluminum nitride (AlN) ceramic substrate or other cera...
Hitechpcba is a wоrld-lеаding PCB Manufacturing & PCB Assembly company with more than 20 years experience in the electronics manufacturing industry. We focus on Circuit board fabrication, PCB assembly, electronic parts sourcing.
Shenzhen, China
Used / Pre-Owned Test / ATE equipment
SMT Xtra offer extra quality and value, giving you the very best deal for Used / Pre-Owned Test / ATE Equipment and Technology. All major Test / ATE equipment brands covered Spectrum Analysers, Si...
FUJI NXT1,2,3 and Aimex Heads - New heads and repair service
We Sell and Service the following FUJI NXT HEADS AIMEX DX heads, R12 and R4 auto tools H24S H24G H24 V12 H12 HSQ H12SQ H12HS H12S H12 H08Q H08M H08 H04HSF H04S H04 G04FQ G04F G04Q G04 H02F H02 H01 We can offer New or servi...
SMT Spare Parts, Nozzles and Consumables
SMT Xtra provides a full range of original or high quality replacement Spare Parts, Nozzles and Consumables for... SMT Placement Machines. SMT Screen Printers. SMT Dispensers....
SMT Machine Rental, Installation and Servicing
In order to overcome short term increases in your SMT production demands SMT Xtra can offer short-term renting on some of our selected SMT assembly equipment. Simply tell us what your production needs are and we can...
SMT Nozzles
NEW AND USED SMT nozzles available in a number of the top consumer brands including ...
SMT Feeders
At SMT Xtra we go the extra distance to offer you the very best deal for new and used SMT Feeders... The Xtra Promise... New, used and surplus quality feeders, an affordable alternative to buying from...
Pre-Owned SMT / PTH equipment
SMT Xtra offers a comprehensive range of quality pre-owned SMT and PTH equipment at competitive prices to suit all requirements and budgets... Smt Xtra is backed by the HSBC bank enabling us to offer customers easy p...
.jpg)
SMT XTRA is a global electronics specialist, providing productivity enhancing solutions for the global Surface Mount electronic assembly sector.
Doncaster, United Kingdom
PCB Footprint Expert - Tens of Millions of Parts; 25 CAD Formats!
The PCB Footprint Expert is a powerful CAD library development tool powered by our own proprietary CAD LEAP Technology (Libraries Enhanced with Automated Preferences). It is packed with very powerful advanced library management fe...
BOM Builder Service
Our BOM Builder service is a complimentary part building service that really can shave days off every PCB design! By taking advantage of this anytime (24/7) service, you no longer need to waste time to search online for library data, or wo...
PCB Libraries' "Footprint Expert" suite uses CAD LEAP(tm) Technology to greatly simplify footprint and 3D STEP model creation; it is used by tens of thousands of PCB designers and engineers all over the world.
Peoria, Arizona, USA
Consultant / Service Provider, Media / Publisher / Online Resource, Other
SMTnet Marketing Optimization
Make the most out of your SMTnet promotion! Ready to start seeing more visitors from SMTnet? We'll help you do just that. An SMTnet Marketing Program is available to help companies of every size. ...
Search Engine Optimization (SEO)
Search engine optimization services for companies involved with electronics manufacturing. Experience in multiple languages and geographies. Let us show you how to optimize your online efforts by using your own website in conju...
SEO 1A provides internet marketing services for manufacturers, sales reps, distributors, & service providers. These services span a wide range of options, catering to companies of all sizes. Experts at optimizing SMTnet promo!
Poland, Maine, USA
Consultant / Service Provider, Events Organizer, Marketing Agency, Media / Publisher / Online Resource, Other
DIP Wave Soldering Machine Top350
DIP Wave Soldering Machine Top350 DIP Wave Soldering Machine Wave Soldering Machine THT Wave Soldering Machine...
Flason SMT SAMSUNG SM Feeder Storage Cart
http://www.flason-smt.com/product/SAMSUNG-SM-Feeder-Storage-Cart.html Flason SMT SAMSUNG SM Feeder Storage Cart Feeder Storage Cart...
ASSEMBLEON YAMAHA TYPE 211F Nozzle
http://www.flason-smt.com/product/ASSEMBLEON-YAMAHA-TYPE-211F-Nozzle.html ASSEMBLEON YAMAHA TYPE 211F Nozzle...
Flason SMT Samsung CP45 feeder storage cart
http://www.flason-smt.com/product/Samsung-CP45-feeder-storage-cart.html Samsung CP45 feeder storage cart Feeder storage Cart...
I-PULSE 0201 01005 03015 Nozzle
http://www.flason-smt.com/product/I-PULSE-0201-01005-03015-Nozzle.html I-PULSE 0201 01005 03015 Nozzle S...
BTU PYRAMAX ZeroTurn Dual Chamber Reflow Oven
http://www.flason-smt.com/product/BTU-PYRAMAX-ZeroTurn-Dual-Chamber-Reflow-Oven.html BTU PYRAMAX ZeroTurn Dual Chamber Reflow Oven...
Samsung SM 8*2mm 8*4mm 12mm 16mm 24mm 32mm feeder
http://www.flason-smt.com/product/Samsung-SM-8-2mm-8-4mm-12mm-16mm-24mm-32mm-feeder.html Samsung SM 8*2mm 8*4mm 12mm 16mm 24mm 32mm feeder...
Dual Rail N2 SMT Reflow Oven KTE-1200D-N
Dual Rail N2 SMT Reflow Oven KTE-1200D-N Dual Rail Conveyor Nitrogen soldering process Dimension 6985*1539*...
Flason SMT Custom Reflow Oven M8
Flason SMT Custom Reflow Oven M8 Name: SMT Reflow Oven Heating zones: 8 Heating m...
Samsung Nozzles
http://www.flason-smt.com/product/Samsung-Nozzles.html Samsung Nozzles SMT Nozzle Samsung Nozzle&...
Wave soldering machine out feed conveyor
http://www.flason-smt.com/product/SMT-Assembly-line-Wave-soldering-machine-out-feed-conveyor.html SMT Assembly line Wave soldering machine out feed conveyor&#...
Vitronics Soltec XPM2-820 8 zone lead free reflow oven
Vitronics Soltec XPM2-820 8 zone lead free reflow oven Max. Width of PCB 450mm Heating zones: 8 Heating method&#...
Hanwha 16mm 32mm 44mm 56mm Feeder
Hanwha 16mm 32mm 44mm 56mm Feeder SMT Feeder Hanwha 16mm 32mm 44mm 56mm Feeder Hanwha Chip...
Samsung CP60 NOZZLE TN030 TN045 TN070 TN140 TN220 TN400
http://www.flason-smt.com/product/Samsung-CP60-NOZZLE-TN030-TN045-TN070-TN140-TN220-TN400.html Samsung CP60 NOZZLE TN030 TN045 TN070 TN140 TN220 TN400...
Flason SMT Samsung Pick and Place Machine SM321 High Speed SMT Modular Chip Mounter
Flason SMT Samsung Pick and Place Machine SM321 High Speed SMT Modular Chip Mounter High Speed:750,000 CPH 2 Gantry x 10 Spind...
Panasonic NPM-D3 SMT Machine-Flason SMT
http://www.flason-smt.com/product/Panasonic-NPM-D3-SMT-Machine.html Panasonic NPM-D3 SMT Machine Panasonic SMT Machine Panasonic NPM-D3 S...
Yamaha YG200 Pick and Place Machine
http://www.flason-smt.com/product/Yamaha-YG200-Pick-and-Place-Machine.html Yamaha YG200 Pick and Place Machine...
Flason SMT Assembly line Reflow Oven M6
Flason SMT Assembly line Reflow Oven M6 Name: SMT Reflow Oven Heating zones: 6 Hea...
High Speed SMT Production Line
High Speed SMT Production Line High Speed PCB Production Line High Speed LED Production Line High Speed SMT Assembly Line...
China SMT reflow oven Factory directly price
China SMT reflow oven Factory directly price Name: SMT Reflow Oven Heating zones: 8...
Flason is high-tech enterprise focusing on SMT research and development,building new advanced solutions in SMT Assembly machines, like reflow oven, wave soldering machine, pick and place machine, AOI,SPI,PCB conveyor etc.
shenzhen, China
PCB turnover trolley new SMT circuit board PCB board turnover transfer stainless steel hand push bench
Board Handling - Pallets, Carriers, Fixtures
It can be customized according to the requirements...
KIC 2000
Introduction of kic2000 furnace temperature tester Processing customization: Yes Brand: US KIC Model: kic2000 Measurement range: - 50-1050 (℃)...
Cylinder type solder paste rewarming machine can solder paste return temperature timer solder paste timing rewarming machine
Brand: NSTAR model: bacao solder paste rewarming machine Origin: Shenzhen, China Color classification: type A: 4 syringe tank + 4 can filling tank...
SMT hanging rack electronic factory hanging rack anti-static turnover car can be customized stainless steel tray box car
SMT peripheral equipment mainly refers to: printing press, docking station, Mounter, reflow soldering, AOI, wave soldering and other equipment. SMT peripheral technology is similar to the original hyper threading technolo...
Samsung SM Feeder car
SMT peripheral equipment mainly refers to: printing press, docking station, Mounter, reflow soldering, A...
Automatic solder paste printer GKg G9+
G9 + automatic vision printing machine is a new product for SMT high-end application field, which can perfectly meet the process requirements of 03015, 0.25pich and other fine spacing, high precision and high speed. Intro...
Solder paste FIFO storage device refrigerator solder paste storage type first in first out storage rack cabine
Product material: stainless steel (internal) + steel plate baking paint Storage quantity: 36 cans of tin paste Product weight: 13kg Product size: 495 * 750 * 95mm...
Semi automatic solder paste printer S400
Product features: The servo system is convenient and accurate for positioning. The Japanese THK guide rail and Taiwan STK variable frequency motor are used to drive the scraper base to ensure the print...
SMT PCB transmission and receiving machine
Parameter name / model specification / type UL330 UL445 UL530 UL535 Supply voltagePower Supply： AC220V/50/60HZ Supply pressureAir Supply： 5kg...
Panasonic NPM-W SMT machine
Model name: NPM-W Substrate size Monorail * 1 Overall installation: L50mm×W50mm ~ L750mm×W550mm...
Suction nozzle cleaning machine, automatic / SMT suction nozzle cleaning
Supply suction nozzle cleaning machine, automatic / SMT suction nozzle cleaning machine / Shenzhen manufacturer details Product Name: suction nozzle cleaning machine Product model: hn-nc207...
Solder paste rewarming machine timing automatic rewarming machine solder paste counting time
Product Name: solder paste rewarming machine Origin: Shenzhen Material: hot steel spraying Product size: L500 * w300 * h230 (mm) Weight: net weight 15kg, plus pa...
Siemens electric Feeder calibrator feeder calibrator SMT Feeder calibrator
Trade name: Siemens feeder calibrator Weight: About 35kg Product size (mm): L500 * W350 * H500 Calibration mode: Electric Applicable model: Siemens D series (not...
New products of anti-static cycle car manufacturer can customize LED light board PCB circuit board special transport mute trolley
Product size: 900 * 1350 * 1260mm Product category: non standard customization Caster size: 4 inches...
SMT PCB conveyor, PCB detection conveyor
1. PCB transmission machine: For the connection between SMT production lines, Du can also be used for PCB buffering, inspection, Zhi test or manual insertion of electronic components. 2. Application ra...
Solder paste mixer SMT automatic solder paste mixe
Model: nstar-600 Origin: Shenzhen, China Installation mode: vertical Color classification: solder paste mixer machine + mixing knife Applicable material: solder...
KIC X5
Product coefficient of KIC X5 furnace temperature tester Hardware performance: 1. Support all winoows software platform, USB key encryption function. 2. New dual power supply mode:...
PCB Magazine
Board Handling - Pallets, Carriers, Fixtures
Product Name: high temperature loading rack Storage data: 50pcs Specification: 355 * (50-250) mm Product specification: l: 355mm * W: 320mm * H: 563mm...
PCB loader of PCB unloading machine
SMT board loading machine parameters It has the advantages of simple operation, reliable structure, excellent material selection and high quality. Product specification: weight: 65kg...
Automatic solder paste printing machine
Solder paste printing range (1) SMT technology of resistance, capacitance, inductance, diode, triode and other chip components production and processing: 01005, 0201, 04020603, 0805, 1206 and other specifications and size...
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Shenzhen, Guangdong, China
Consultant / Service Provider, Equipment Dealer / Broker / Auctions, Manufacturer, Manufacturer's Representative
Flux Free Formic Acid Reflow Oven - 1936 MKV
Flux Free Formic Reflow Reflow in Formic Acid Vapor Heller has designed and built an production ready horizontal reflow oven for formic acid vapor. This new oven has been designed to...
Voidless / Vacuum Reflow Soldering Oven - 1809 MK5
1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry!&...
SMT Reflow Oven - 1826 Mark 5
The World's Best SMT Convection Reflow Ovens for Large Boards and Dual Lane 1826 Mark 5 reflow oven provides consistent performance for high volume reflow requirements while minimizing preventative maintenance and floorspace....
860 Pressure Curing Oven (PCO)
A Pressure Cure Oven (PCO), or Autoclave, is used to minimize voiding and increase adhesion strength for bonding processes typically used in die attach and underfill applications. PCO pressurizes air into a...
Vertical Curing Oven - Heller 788
Heller 788 In-line, Continuous Cure, Vertical Format Oven This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of fl...
Vertical Curing Mini Oven - Heller 755
The mini vertical oven has a cycle time of 25 - 60 seconds per 150mm fixture, 4mm Edge Hold Pins and Guides. PCBs up to 250mm wide can be processed. Dual Feed option for high throughoutput. In-line, vertical automation...
High Volume Reflow Oven - 1936/2043 Mark5
The World's Best Convection Reflow Oven The ultimate high volume production reflow oven with belt speeds up to 1.4 m/min to accommodate the fastest pick and place systems....
Dual Lane / Dual Temperature SMT Reflow Oven - 1910 MK5
Dual Chamber Module - Dual Chambers + Dual Blowers + Dual Heaters + Dual T/Cs. Bifurcated (Dual) chamber reflow oven allows 2 different thermal profiles to run simultaneously in the same reflow oven foot pr...
Convection Reflow Oven Mk7
Convection Reflow Oven The World's Best Convection Reflow Oven for High-Throughput The New reflow oven platform revolutionizes the...
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
Florham Park, New Jersey, USA
Samsung SMT Nozzles, Tooling, & Consumables (CP40, CP45, CP60, SM, & more)
We offer a wide selection of the Samsung SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality...
Fuji Nozzles (NXT, XP, CP-6, CP-7, QP3, IP3, & more)
We offer a wide selection of the Fuji SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufactu...
.JPG)
Assembleon SMT Nozzles, Tooling, & Consumables (Emerald, Opal, Topax, Saphire, MC, MG, & more)
We offer a wide selection of the Assembleon SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high qual...
Juki SMT Nozzles, Tooling, & Consumables (KE, FX, JX, RX, & more)
We offer a wide selection of the Juki SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality, l...
QWIKTRAY Custom Matrix Trays for Electronic Components
Do you have a unique component that isn’t available in tape and reel? Tired of hand placing those components because you don’t have a compatible feeder? Can’t find J...
Custom Engineered SMT Nozzles & Tooling
Effective Solutions for any Odd-Form Application on any OEM Platform. Count On Tools has the experience and manufacturing flexibility to be able to develop custom engineered solutions to satisfy your individual Proc...
ASM/Siemens Siplace Ceramic Nozzles
These new ceramic versions are available in the 901, 902, 904, 906, & 925 versions. Special vacuum geometry provides excellent performance in the machine which saves you time and money during production. The machined bodies are flexible, so...
ezCLIP Universal Stop Clip for PCB Magazine Racks
Introducing the ezCLIP universal stop clip for PCB magazine racks. The ezCLIP system was created to allow electronics manufacturers who manually load/unload PCB magazine racks a simple way to distinguish required spacing between boards and to p...
Yamaha SMT Nozzles, Tooling, & Consumables (YV, YG, YS, & more)
We offer a wide selection of the Yamaha SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...
Mycronic / Mydata Feeder Repair Service
Count On Tools now offers repair services for MYDATA Agilis Feeders. This program will be available for the 3.7, 4.0, 4.7, and 5.4 Agilis feeders. This is the only repair option for these feeders on the market and provides significant costs sav...
Mirae SMT Nozzles, Tooling, & Consumables
We offer a wide selection of the Mirae SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...
.JPG)
INSTOCK Consigment Program for SMT Nozzles, Tooling, & Consumables
The INSTOCK Consignment Plus Program has been developed to give EMS companies and contract manufacturers immediate access to project critical products with no up-front inventory costs or risk of overstock. INSTOCK program serves particip...
ezLOAD PCB Support System
Board Handling - Pallets, Carriers, Fixtures
Count On Tools Inc., a leading provider of precision components and SMT spare parts, introduces the new ezLOAD PCB Support System. With the recent increase of densely populated double-sided circuit boards, COT recognized the need for more affordab...
Universal SMT Nozzles, Tooling, & Consumables
We offer a wide selection of the Universal SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quali...
Custom LED Nozzles & Pick Up Tools
Count On Tools specializes in custom engineered nozzles for all types of LEDs (Cree, Luxeon, Phillips, NIchia, Osram, etc). Recent growth in LED technology and solid state lighting has provided the electronics manufa...
Panasonic SMT Nozzles, Tooling, & Consumables (CM402, CM602, NPM, MSF, BM, HT, MSR, MV, & more!)
We offer a wide selection of the PanasonicSMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high qualit...
Hitachi SMT Nozzles, Tooling, & Consumables (Sigma, GXH, & more)
We offer a wide selection of the Hitachi SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality...
Ipulse SMT Nozzles, Tooling, & Consumables (M1, M2, M4, M6, M7, M8, & more)
We offer a wide selection of the IpulseSMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...
Mycronic Mydata SMT Nozzles, Tooling, & Consumables (Midas & Hydra)
The new series of Mydata replacement nozzles, for both the Midas and Hydra mountheads, are the only direct replacement for OEM nozzles on the market. We also offer custom engineering to standar...
LED Nozzles
Recent growth in LED technology and solid state lighting has provided the electronics manufacturing industry with viable solutions for today's electronic devices. As a result, companies in the surface mount technology (SMT) industry are expanding...
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
Gainesville, Georgia, USA
Air Cooled and Water Cooled Chillers
Affinity, Lytron, Triple Loop Chiller CWA-300, Boc Edwards, Advantage, CSZ, Carrier, Koolant Koolers, Filtrine, Neslab, SMC, Thermal Care, Temptek View our inventory online or call us at 978-790-2774...
Reflow Ovens
Heller, BTU, Vitronics, Electrovert Reflow Ovens View our inventory online or call us at 978-790-2774...
Stencil Printers
MPM, DEK, EKRA, FUJI Stencil Printers View our inventory online or call us at 978-790-2774...
Rotary Screw Air Compresors
Kaeser, Sullair, Gardner Denver, Atlas Copco, Quincy, Wilkerson and Zeks Air Dryers View our inventory online or call us at 978-790-2774...
PC Board Cleaners and Washes
Aqueous Technologies Batch Cleaners, SCS Ionograph, Aquastorm 100 and 200, Smartsonic, Alpha Metals, Speedline, Electrovert, Technical Devices, Austin American, Unit Design, Westkleen, ECD View our inventory online or call us at 978-790-27...
PCB Routers and Depanelers
Cencorp, PMJ, Fancort, IPTE View our inventory online or call us at 978-790-2774...
Pick and Place Machines
Univeral, FUJI, Mydata, Siemens, Europlacer, Philips, Assembleon, Contact Systems View our inventory online or call us at 978-790-2774...
Tyco Press
Tyco Press 3 Tons BMEP-3T, 5 Tons BMEP-5T, 6 Tons MEP-6T, 12 Tons MEP-12T, AEP-12T View our inventory online or call us at 978-790-2774...
Environmental Chambers and Ovens
Thermotron, Grieve, Envirotronics, Blue M, Despatch, Test Equity, Tenney, Cincinnati Sub Zero, Espec, CSZ View our inventory online or call us at 978-790-2774...
AOI PC Board Inspection
Vi Technology, Mirtec, Orbotech, Omron, CR Technology, MVP, Cyberoptics, Photon Dynamics View our inventory online or call us at 978-790-2774...
Dispensers
Camalot XyflexPro+ FXD 8000 Prodigy, Asymtek Spectrum 910 920, PVA, MRSI View our inventory online or call us at 978-790-2774...
Semiconductor Equipment
Front End and Back End Yaskawa Wafer Robots, Ebara Pumps, Boc Edwards Pumps, Affinity Chillers, ASM, Karl Suss, Agilent, Tencor, EVG, GSI, ESEC, Besi, Kulicke and Soffa, K&S, MRSI, Temptronic &...
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Middleton, Massachusetts, USA
SMT Chip Mounter / Pick & Place Machine - Efficient Component Assembly Solution
SMT Chip Mounter / Pick & Place Machine - Efficient Component Assembly Solution ❙ Introduce of Hanwha Pick and Place Machine SAMSUNG / Han...
High Performance LED Lead- Free LED Reflow Oven Machine for SMT Line
High Performance LED Lead- Free LED Reflow Oven Machine for SMT Line ❙ Introduce of Reflow Soldering Oven...
SMT Offline X-ray X-7200
SMT Offline X-ray X-7200 Products Introduction | I.C.T Group www.smt11.com www.smtfactory.com Full SMT Factory Solution Partner SMT Offline X-ray X-7200 Introduce: I.C.T X-7200 inspection machin...
Automatic Stencil Printer
Automatic Stencil Printer ETA high accuracy PCB printing machine, solder paste printer, automatic stencil printer with best quality and service....
ETA DIP Inverted Camera Online AOI Machine ETA-V5200
ETA DIP Inverted Camera Online AOI Machine ETA-V5200 If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't inclu...
Fully-auto LED Solder Paste Printing Machine
Fully-auto LED Solder Paste Printing Machine ❙ Introduce of &l...
High-end PCB Reject Conveyor
High-end PCB Reject Conveyor If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products.&l...
I.C.T-5200 | SMT Fixture Cleaning Machine Equipment
I.C.T-5200 | SMT Fixture Cleaning Machine Equipment Introduction: I.C.T-5200 Fixture Cleaning Machine is used to clean grease, flux, dusts on the surface of all kinds of SMT fixtures，tray, reflow oven cooler and filter, wa...
High-end Translational NG/OK SMT Unloader
High-end Translational NG/OK SMT Unloader If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of o...
Hanwha DECAN S1 Fast & Flexible Chip Mounter
Hanwha DECAN S1 Fast & Flexible Chip Mounter If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't includ...
Lead-free Reflow Soldering Oven
Lead-free Reflow Soldering Oven...
High-efficient SMT Lead Free Reflow Soldering Oven
High-efficient SMT Lead Free Reflow Soldering Oven ❙ Introduce of Reflow Soldering Oven...
PCB Loader/PCB Unloader in SMT Line
PCB Loader/PCB unloader in SMT line Model: PCB Loader Brief: SMT, SMT Loader, PCB Loader, SMT equipment Details >Microcomputer control, stable and reliable. >LCD screen display, menu in...
Fully Automatic Solder Paste Printer ETA-5134
Fully Automatic Solder Paste Printer ETA-5134 ❙ Introduce of &l...
ETA Inline SMT PCBA Router Machine ETA-IR350
ETA Inline SMT PCBA Router Machine ETA-IR350 If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of...
High Quality SMT Machine 8 Heating Zone Lead Free Reflow Oven for Sale
High Quality SMT Machine 8 Heating Zone Lead Free Reflow Oven for Sale ❙ Introduce of Reflow Soldering Oven...
Yamaha S20 Modular Pick and Place Machine
Yamaha S20 Modular Pick and Place Machine ❙ Features of Yamaha SMT S20 Pick and Place Machine Yamaha 3D hybrid modular pi...
ASM SIPLACE SX SMT Placement
ASM SIPLACE SX SMT Placement SMD Chip Shooter If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included allof...
High Performance Reflow Oven SMT PCB Reflow Soldering Oven Machine Price
High Performance Reflow Oven SMT PCB Reflow Soldering Oven Machine Price ❙ Introduce of Reflow Soldering Oven...
High Speed SMT Pick and Place Machine Flex-6
High Speed SMT Pick and Place Machine Flex-6 If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't inclu...
I.C.T ( Dongguan ICT Technology Co., Ltd. )
I.C.T is a manufacturer from China that offers SMT, DIP, PCBA conformal coating equipment and turnkey solution.
Dongguan, Guangdong, China
used smt and semi machines buy and resell
used smt and THT , Semi machines buy and resell ...
HongCheng import & Export co.,Ltd
Buy and selling used smt，semi， Robot ,CNC and all used machines
Dongguan, Guangdong, China
SIEMENS/ASM SPARE PART
P/N Description 00047012-01 Cover cap CV-PK-4-B PUR...
SMT Pick and Place Nozzles
High quality SMT nozzles, cutters, filters, etc. Featured Items: Siemens Nozzles Siemens Nozzle Type 911 Siemens Nozzle Type 914 Nozzle Ty...
Siemens Spare Parts
Siemens machine feeders and spare parts. Featured items: Siemens feeder module 12/16mm Siemens feeder module 24/32mm Siemens feeder mod. 44mm Siemens f...
SMT Consumables
Featured Items: Single 8mm tape Abrasive Block for Feeder Table Double side tape (8mm) SMT magazine rack Siemens Valve Plunger SP6 DST-8MM-00 (4)spli...
We offer various kinds of high quality SMT nozzles, feeders, cutters, filters, etc. Sales1@kundasmt.com
Suzhou, Jiangsu, China
IPC Designer Certification
The IPC Designer Certification or CID (Certified Interconnect Designer) is the industry’s premier professional development program directly focused on PCB design philosophy and requirements. If your passion is the transformation of electrica...
IPC-A-610 Instructor (CIT) - Training and Certification
This 4-day, lectured course utilizes the images in the IPC-A-610 document to provide visual accept/reject criteria examples for all three classes of assembly production–for both lead and lead-free. The IPC-A-610, “The Acc...
IPC-6012 Standard Expert (CSE) Certification Training Course
If you are looking at becoming a subject matter expert in IPC-6012 “Qualification and Performance Specification for Rigid Printed Boards” without the need to provide any IPC Certification to others, then this is the progr...
IPC-A-620 Specialist (CIS) - Training and Certification
Cable Wire Harness Assemblies Training This 4-day, lectured course is a comprehensive, operator-level certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly....
IPC-A-610 Standard Expert (CSE) Certification Training Course
If you are looking at becoming a subject matter expert in IPC-A-610, “The Acceptability of Electronic Assemblies” without the need to provide any IPC Certification to others, then this is the program for you. &...
IPC Advance Design Certification
Continuing the educational series for PCB Design, the IPC Advanced Designer Certification or CID+ (Advanced Certified Interconnect Designer) is the ultimate professional industry certification for a designer looking to obtain what we would c...
J-STD-001 Aerospace Addendum - Training and Certification
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal c...
Hand Soldering Certification
Customize this course by selecting only the days/modules that meet your training requirements. Using both lead and lead-free alloys, Hand Soldering Operator Certification introduces the basics of soldering in Wires &a...
IPC-6012 Instructor (CIT) Certification Training Course
If you are looking for a comprehensive program that will develop your understanding of design, specifications, fabrication and inspection of printed circuit boards (PCBs), this is the certification for you. The IPC-6012 “Qualificat...
Hands-On Cable Wire Harness Lab
This 1-day, hands-on lab may be added to either the IPC-A-620 Certified Trainer or IPC-A-620 Certified Specialist course. The IPC/WHMA-A-620 is the most widely used Inspection Specification for the cable and wire harness assembly industry. I...
IPC-7711/7721 Specialist (CIS) - Training and Certification
Component Rework/Board Repair Training This is a 5-day, advanced course for anyone responsible for quality and reliability of reworked or repaired electronic assemblies. It is a comprehensive hands-on training program w...
Component Identification Training
Learn to identify (with the use of aids, visuals or actual components) packaging types of the most commonly used through-hole and surface mount components, interconnections and hardware used in electronic assembly. This course also covers co...
Electrostatic Discharge Training
ESD Training This course is designed to increase awareness of the causes and effects of Electrostatic Discharge (ESD) and Electrical Overstress (EOS) on electronic assemblies and components. Students learn the use of ES...
Interactive Inspection Lab
This is a 1-day course utilizing lectures, visual acuity exercises, and physical assemblies to provide the students with an experience in visually inspecting printed circuit assemblies. Knowledge base programs identify di...
IPC-A-600 Specialist (CIS) - Training and Certification
Bare Board Inspection Training This 3-day, lectured course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection....
J-STD-001 Specialist (CIS)- Training and Certification
This program is for experienced solderers seeking an in depth knowledge of the J-STD-001 Document. The course reviews this document and helps students learn how to interpret the criteria. Open and closed book exams are required after each mo...
J-STD-001 Instructor (CIT) - Training and Certification
This is a combination lectured and hands-on course covering the information in the IPC J-STD-001 document. The J-STD-001, “Requirements for Soldered Electrical & Electronic Assemblies”...
IPC-A-600 Instructor (CIT) - Training and Certification
Bare Board Inspection Training This 3-day, lectured course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection....
IPC-A-610 Specialist (CIS) - Training and Certification
This 3-day, lectured course utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production–in both lead and lead-free. The IPC-A...
Counterfeit Components Workshop
In cooperation and partnership with IDEA, this course provides a basic introduction to Counterfeit Mitigation as well as an introduction to IDEA-STD-1010, including training in methods for the visual detection of counterfeit and substandard...
EPTAC is an internationally recognized solder training and IPC certification corporation, giving professionals the skills to accelerate their careers, and businesses the talent to succeed.
Manchester, New Hampshire, USA
17550004 Rotary Encoder Assy For VSQ
17550004 Rotary Encoder Assy For VSQ 43871802 Universal plug-in machine AI accessories 44241409 Universal plug-in machine AI accessories inner forming knife (left) with tungsten steel 44241509 Universal plu...
JUKI 105 nozzle E35057210A0
JUKI 105 nozzle E35057210A0 Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysmt Website: www.smt-cn.com...
17550004 Rotary Encoder Assy For VSQ
17550004 Rotary Encoder Assy For VSQ 43871802 Universal plug-in machine AI accessories 44241409 Universal plug-in machine AI accessories inner forming knife (left) with tungsten steel 44241509 Universal plu...
Juki SMT COPY nozzles
our nozzles that use for JUKI SMT machines with good quality and the most competitive price. They are all original products and we now have so many in stock. Welcome to contact us in your free time if you are interested. Part numbers as following:...
_1.jpg)
Samsung Feeder Cart smt storage feeder trolley for samsung SM series feeder
Samsung Feeder Cart smt storage feeder trolley for samsung SM series feeder Description: 1.Suitable for SMT workshop feeder placed, prepare feeder materials ahead of time, improve production efficiency. 2.Stainless steel we...
_11.jpg)
PANASONIC BM221 Filter 1086289282
PANASONIC BM221 Filter 1086289282 Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysmt Website: www.smt-cn.com...
_1.JPG)
SAMSUNG CP40 Z Axis Holder SMT shaft
SAMSUNG CP40 Z Axis Holder SMT shaft Samsung holder shaft: J7055542A SHAFT J90551171A SHAFT CP45 SHAFT J9058090A FILTER HOLDER J81001856A FILTER HOLDER JM-SAM-11 FILTER HOLDER VFU2-44 FILT...
JUKI SFN1,SFN2,SFN3,SFN4 VIBRATION FEEDER (STICK FEEDER)
JUKI SFN1,SFN2,SFN3,SFN4 VIBRATION FEEDER (STICK FEEDER) JUKI SFN1,SFN2,SFN3,SFN4 VIBRATION FEEDER (STICK FEEDER ) OFFER JUKI VIBRATION FEEDER : SFN1/SFN2,SFN3,SFN4 (ORIGINAL NEW ) Sales: Becky Su MP:86-15323874439...
Smt Hitachi nozzles sigma-G4 Sigma-G5 nozzles used in pick and place machine
Smt Hitachi nozzles sigma-G4 Sigma-G5 nozzles used in pick and place machine Hitachi GXH-1, GXH-3 Nozzles Part Number Description 630 128 4842 (#101) &n...
_1.jpg)
2-88mm feeders Fuji XPF compatible
2-88mm feeders Fuji XPF compatible 2-88mm feeders Fuji XPF compatible We have this feeder in stock, original used & working wel, if you have any interest, just contact us. M/P: +86 15323874439 Email: bec...
FUJI NXT 8MM 12MM 16MM 32MM 44MM feeder
FUJI NXT 8MM 12MM 16MM 32MM 44MM feeder FUJI NXT 8MM 12MM 16MM 32MM 44MM feeder We have a large of invetory of FUJI NXT feeder. If you are interested, pls contact us. Sales: Becky Su MP:86-15323874439 Email:...
Juki CF8*2MM FEEDER
We have full range of JUKI feeder in ready stock for immediately sale. All model(ATF,CF,FF,NF) and size(8mm~88mm) are available. AF05HP AF12FS AF16FS AF24FS...
_1.jpg)
Samsung SM Series feeders
Samsung SM Series feeders We have lot of Samsung SM Serise feeders in stock for sale. 8x2/4, 12/16/24/32/44/56mm available. Any interested please contact me for more details. Thanks! We are professional SMT...
_1.jpg)
Samsung CP20 CP40 CP45 CP60 32MM feeder
Samsung CP20 CP40 CP45 CP60 32MM feeder Dear Customer, Thanks for your attention. We have 50+ Samsung CP20 CP40 CP45 CP60 32MM original used & working well feeder in stock, if you have any interest, feel free to c...
Samsung SAMSUNG CN400N Nozzle
SAMSUNG CN400N Nozzle Model: SAMSUNG CN400N Nozzle SAMSUNG Nozzle List Brand Machine Model Specification Material of nozzle tip SAMSUNG CP30 M1, M2 , M3 Tungsten steel SAMSUNG CP33 XG05 / XH0...
SMT Samsung CP feeder 8x2mm, PA-NST for 01005 pick and place machine
SMT Samsung CP feeder 8x2mm, PA-NST for 01005 pick and place machine Samsung SM/CP40 CP45 Feeders models: SAMSUNG SM 8*2mm FEEDER SAMSUNG SM 8*4mm FEEDER SAMSUNG SM 12mm FEEDER SAMSUNG SM 16mm FEEDER SA...
_1.jpg)
Siemens SIEMENS 904 NOZZLE
Siemens SIEMENS 904 NOZZLE SIEMENS 904 NOZZLE 00322545-01 PICK UP NOZZLE 416 00322543-01 PICK UP NOZZLE 417 00322544-01 PICK UP NOZZLE 418 00322546-01 PICK UP NOZZLE 419 03012036-01 PICK...
Yamaha nozzle 71A
Yamaha nozzle 71A M/P: +86 15323874439 becky(at)hysmt(dot)cn beckysusmt(at)hotmail(dot)com Skype: beckysmt www(dot)smt-cn(dot)com...
Smt shaft Samsung CP33 Holder
Smt shaft Samsung CP33 Holder...
Samsung Holder SM431 Z Axis shaft
Samsung Holder SM431 Z Axis shaft...
ZK Electronic Technology Co., Limited
ZK Electronic Technology Co., Limited professional in Surface-Mount Technology area and supports most major brands of electronic asembly equipments with a large selections of compatible SMT.
Shenzhen, China
Consultant / Service Provider, Distributor, Equipment Dealer / Broker / Auctions, Manufacturer
SOS Inventory
SOS Inventory is ideal for small to medium-sized manufacturers in various business sectors, including electronics, food processing, aircraft manufacturing, retail, equipment, building materials and many more. The software allows organizations to i...
Plus Subscription
Our plus subscription includes: Unlimited locations Serial and lot tracking. Barcoding 3 users included. $25 each additional user. $129.95/month...
Pro Subscription
Our pro subscription includes: Advanced automation Job Costing Customer Portal 5 users included. $25 each additional user. $179.95/month DETAIL...
Companion Subscription
Our companion subscription includes: Sales orders. Assemblies. Best-in-class QuickBooks integration. 2 users included. $25 each additional user. $64.95/month...
SOS Inventory Software provides top-of-the-line inventory control, order management, and manufacturing for a wide variety of industries, plus integration with QBO, UPS, ShipStation, Shopify, BigCommerce, Zapier and PayPal.
Mansfield, Texas, USA
Inline V-Cut PCB Separator Machine Multi-blade PCB Depanelizer
Inline V-Cut PCB Separator Machine Multi-blade PCB Depanelizer Inline PCB Separator Functions: 1. This machine is used for PCB board depaneling after inserter. 2. It...
Top Cutting PCB Router PCB Depanelizer Machine
Stand Alone Ionizer PCB Depaneling Router Twin Tables and Top Cutting PCB Router Features: • Floor type double table cutting machine, with a speed of 100 mm / s and a positio...
5-Blade Precise V-groove PCB Separator Circular Blade PCB Depaneler
5-Blade Precise V-groove PCB Separator Circular Blade PCB Depaneler PCB Depanelizer Features: 1. Separates panels up to 0.1" 2. The longest panel: No lim...
600mm Penumatic V-groove PCB Cutter Linear Blades PCB Separator
600mm Penumatic V-groove PCB Cutter Linear Blades PCB Separator Penumatic V-groove PCB Cutter Description: In order to improve the output of printed circuit board (PCB) manufactur...
Full Automatic PCB Depaneling Router Machine PCB Separator Without Fixture
Full Automatic PCB Depaneling Router Machine PCB Separator Without Fixture Our Service: 1. Lifetime technical support and 2 years warranty. 2. Free replacement or refund would be don...
Mini Standalone PCB Depaneling Router Machine Economic PCB Separator Machine
Mini Standalone PCB Depaneling Router Machine Economic PCB Separator Machine PCB Depaneling Router Features: Smooth cutting edge Low cutting stress Manul loadi...
Auto Feeding And Loading Full Automatic V-cut PCB Depaneler
Full Automatic V-cut PCB Depaneler Introduction: This equipment can further improve the quality of depaneling. It can realize V-groove XY two-way automatic cutting, cutting aluminum & FR4 boards without burr, can...
V Cut PCB Depaneling Aluminum Cutter Machine For LED Printed Circuit Board
V Cut PCB Depaneling Aluminum Cutter Machine For LED Printed Circuit Board LED PCB Separator Features: 1. Separates panels up to 0.1" 2. The longest panel: No limit 3....
FPC / PCB Punching Dies PCB Depaneler For High Volume Boards Singulation
FPC / PCB Punching Dies PCB Depaneler For High Volume Boards Singulation Advantages: 1. Pneumatic, environmental protection 2. High efficiency, suitable for high volume PCBs...
Multi Blade V-Cut PCB Cutting Machine LED Strip PCB Separator
Multi Blade V-Cut PCB Cutting Machine LED Strip PCB Separator V-cut PCB Cutting Machine Features: 1. It can cut many boards with multiple sets of knives work at the same tim...
Offline Dual Table PCB Depaneling Router with SycoTec Spindle 4025HY
Offline Dual Table PCB Depaneling Router Machine with SycoTec Spindle 4025HY PCB Depaneling Router Features: 1. Two-slide PCB Separator 2. Low stress 3. Sharp cutting edge...
UV Laser PCB Depaneling System, Dual Table for High Volume
UV Laser PCB Depaneling System, Dual Table for High Volume Laser Depaneling Purpose: The processing and application objects are PCB, FPC soft and hard plate and related material cutting, c...
2.4M Platform Aluminum LED Strip PCB Depanelizer V-cut PCB Cutting Machine
2.4M Platform Aluminum LED Strip PCB Depanelizer V-cut PCB Cutting Machine PCB Depanelizer Features: 1. Separates panels up to 0.1"...
15W UV Laser Economic PCB Laser Depaneling System
15W UV Laser Economic PCB Laser Depaneling System PCB Laser Depaneling System Specification: Laser solid-state UV laser...
Desktop PCB Depaneling Router Machine with Customized Fixture
Desktop PCB Depaneling Router Machine with Customized Fixture Desktop PCB Router Features: 1. Bench-top single table PCB router with speeds up to 100mm/s and positioning speeds of 500mm/s....
Manual V Cut PCB Depanelizer PCB Board Cutter
Manual V Cut PCB Depanelizer PCB Board Cutter It is widely used in modern rigid PCB industry. Manual V Cut PCB Depanelizer Machine Features: 1. Simple operation, spee...
V Groove Automatic PCB Depaneling Machine PCB Pizza Cutter
V Groove Automatic PCB Depaneling Machine PCB Pizza Cutter Automatic PCB Depaneling Machine Instroduction: Widely used in the Manufacturing Machinery Electronic Products, aerospace,...
Burr Free Non-Contact PCB Laser Cutting Machine
Laser PCB Cutting Machine Function: The equipment is mainly used in the cutting 5G materials such as CCM / COB / LCP / MPI / COF / cop / pi / CPI in consumer electronics. The equipment integrates high-speed and high-p...
Bottom Cutting Automatic PCB Depaneling Router Machine with 3HP Vaccum Cleaner
PCB Router Function: Used for routed PCB panel singulation with lower stress. PCB Router Advantages: Lower mechanical stress Precise tooling ...
Inline UV PCB Laser Depaneling Machine
Inline UV PCB Laser Depaneling Machine Inline UV PCB Laser Depaneling Instruction: PCB depaneling and singulation laser systems are gaining popularity—especially as circui...
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Huizhou, Guangdong, China
.jpg)
GUS SMT High-precision printing machine semi-automatic screen printing machine
GUS SMT PCB production line High-precision printing machine semi-automatic screen printing machine...
.jpg)
GUS Smt PCB lead-free desktop automatic wave soldering machine
Good quality Smt PCB lead-free desktop automatic wave soldering machine...
GUS SMT Full Hot Air Lead-Free Reflow Soldering
Features: ▲ Patented Heating Wire Heating Technology, Independent Micro-Circulation Wind Design, Upper And Lower Heating Mode, Good Thermal Compensation, High Thermal Efficiency, Power Saving, Fast Heating Speed,&l...
.jpg)
Shenzhen Nanyue Panlong Technology Co., Ltd.
Shenzhen Nanyue Panlong Technology Co., Ltd. GUS SMT is a high-tech company specializing in PCBA surface mount automation production equipment. The company integrates independent research and development, manufacturing, installati
Shenzhen, China
Manufacturers of Custom Thick Film Ceramic Substrates, Chip Resistors and Attenuators
North Andover, Massachusetts, USA
PCBA manufacturer SMT PCB assembly, through hole PCB assembly, Turnkey assembly service
PCBA manufacturer provide SMT PCB assembly, through hole PCB assembly, Turnkey assembly service and box build assembly service all over the world since 2000....
32.jpg)
With more than 22 years of experience in the design and manufacture of electronic assemblies, INTOPCB produces high-quality electronic assemblies for both the commercial and military markets.
shenzhen, Guangdong, China
Manufacturers Reprsentative and Broker of New and Used Electronic Production Equipment
West Palm Beach, Florida, USA
Heraeus Sensor-Nite International
Manufacturer of temperature measurment equipment
Amsterdam, Netherlands
