The BEST Pad Repair kit dry film version includes the tools and materials needed to reliably replace lifted or damaged surface mount and BGA pads on PCB's. This kit includes 3 different tin plated copper base material circuit frame patterns, which offer nearly 3 times as many...
|
Rework & Repair Equipment |
IPC/WHMA-B-620, Requirements and Acceptance for Cable and Wire Harness Assemblies, now at Revision B published November 2012 , is the industry consensus standard for cable and wire harness fabrication and installation. Classes of products are defined and include criteria fo...
|
Education/Training |
This standard provides descriptions and illustrations to help users and t...
|
Education/Training |
IPC A-600H Acceptability of Electronic Assemblies. The IPC-A-600, "Acceptability of Printed Boards " is the most widely used published specification on printed wiring boards. This specification has set the standard for rigid printed boards in terms of PCB workmanship quality. It include...
|
Education/Training |
This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards! IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedu...
|
Education/Training |
IPC-7351B includes both the standard and an IPC-7351B land pattern calculator on CD-ROM for accessing component and land pattern dimensional data.The calculator includes the document’s mathematical algorithms so users can...
|
Education/Training |
IPC 6012 Qualification and Performance Specification for Rigid Printed Boards
This specification covers qualification and performance of rigid PCBs including with or without plated-through holes, single-sided, double-side...
|
Other |
Now updated to Revision F of the latest IPC-A-610F and J-STD-001F – the IPC Training & Reference Guide illustrates critical acceptance criteria for the evaluation of surface mount solder conn...
|
Education/Training |
Now updated to Revision F of the latest IPC-A-610F and J-STD-001F – the IPC Training & Reference Guide illustrates critical acceptance criteria for the evaluation of through-hole solder conne...
|
Education/Training |
The Component Identification Training & Reference Guide is a valuable tool for employee training and quick reference. This comprehensive component identification resource for electronics assembly operators and insp...
|
Education/Training |
If you are trying to instruct new electronic technicians, high schoolers, or DIYers in the skill of soldering and do not want to instruct them on home made PCBs that are not representative of the type parts or the types of surface finish you would expect in a real electronics project, then use th...
|
Education/Training |
BEST Through-hole Training Kits feature REAL circuit boards that represent actual soldering conditions. These training kits feature "062 thick multilayer...
|
Education/Training |
This is a unique stenciling BTC (QFN , LGS, etc) rework stencil system. It improves first pass yields and allows you to rework leadless devices without high-end rework systems.
This configurable part number means you do not have to sort through all of the patterns listed
|
Rework & Repair Equipment |
Quantity Included in Kit
Description
3
|
Rework & Repair Equipment |
Eyelets are made from copper and are tin electronplated unless specified.
Chose the proper eyelet keeping the following in mind:
LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of PCB(t...
|
Rework & Repair Equipment |
BEST has been designing and fabricating circuit frames for sale and for inhouse use for several years. We have both epoxy and dry film circuit frames- you have the choice! In the dry film adhesive system- damaged pads and traces can be replaced without the mess of liquid epoxy. The ...
|
Rework & Repair Equipment |
The BEST Gold Contact Replating Kit includes the tools you need for fast replating and modification of circuit contacts. Edge contacts may require replating if they are contaminated with solder or become scratched during handling or do not meet the minimum plating thickness requi...
|
Rework & Repair Equipment |
The BEST PCB board repair kit gives you the tools you need to repair damaged mask, damaged or missing laminate, replace missing corners or missing pieces of the hard laminate material. Colorants are part of this kit which allows you repair differnt colored PCB laminate materials. Also inclu...
|
Rework & Repair Equipment |
The BEST PCB throughole repair kit gives you the tools you need for fast modification and repair of PCB plated throughhole pads and barrels-no matter what their size. Our online PCB repair training videos, our master instructors along with these materials allows you to ...
|
Rework & Repair Equipment |
The BEST Epoxy Repair Kit can be used to fix damaged solder mask, damaged PCB laminate material as well as repair lifted pads and traces. 3rd party testing has shown by using the BEST 2-part epoxy, the bond strength of repair traces, pads, and lands equals that of the original land, pads, and tra...
|
Rework & Repair Equipment |
The BEST micro pad repair kit includes the tools and materials needed to reliably replace lifted or damaged surface mount and BGA pads on PCBs. This kit includes 3 different tin plated circuit frame patterns, which offer nearly 3 times as many useable replacement land patterns as other circuit fr...
|
Rework & Repair Equipment |
The BEST track repair Kit is designed to meet the quality of original trace patterns.
The BEST Trace Repair Kits make it simple for you to repair damaged circuit traces on printed circuit boards. BEST circuit tracks are strips of 99.9% pure CDA 11000 copper. The st...
|
Rework & Repair Equipment |
The BEST EZReball™ process is the answer to your reballing problems. This BGA reballing process simplifies the process while eliminating the clean up of all those paper remnants, allowing for better yields and faster reballing times.
The simplicity of the EZReball™
|
Rework & Repair Equipment |
This unique rework stenciling system is very simple to use.
Adhesive Backed Stencil Thickness: 004in (.10mm), .005in (.13mm) and .006in (.15mm)
Minimum Aperture Size: .002in (.05mm)
Stencil Material: Plastic film with release liner. The adhesive backed stencil features a l...
|
Rework & Repair Equipment |
SMT Foil Stencils are laser cut solder paste stencils designed to work on their own for hand printing or with stencil tensioning systems. These laser cut stencils do not need to be permanently glued in a frame. These so-called frameless stencils are less expensive than framed ste...
|
Printing |
SMT Framed Stencils are laser cut solder paste stencils designed to work on SMT printing machines. These laser cut stencils are permanently glued into a frame. These framed stencils are are designed for highly repeatable continuous operation in volume production. They are...
|
Printing |
BEST IPC J-STD-001 Revision G training kits feature REAL circuit boards that represent actual soldering conditions. This kit features "062 thick multilayer boards which are more representative of t...
|
Education/Training |
IPC J-STD 001 REV G Requirements for Soldered Electrical and Electronic Assemblies. The IPC J-STD-001F standard is the industry-consensus document with respect to the assembly of PCBs and electronic assemblies.
Released October 2017.
IPC J-S...
|
Soldering - Other |
IPC A-610 G Acceptability of Electronic Assemblies.
The 610 is the industry standard for the acceptance criteria for assembled PCBs.
It is also the instructional book used when teaching IPC-A610 CIS students.
Revision has...
|
Inspection |
SMT Prototype Stencils are laser cut solder paste prototype stencils designed to work on their own for hand printing. These laser cut prototype stencils do not need to be permanently glued in a frame. These so-called framelessstencils are less expensive than fra...
|
Printing |