PCB Assembly Products

SMT / PCB Products and Services

SMT, PCB Manufacturing products and services offered by SMTnet members.


This product does not exist or has been removed.

Browse other electronics manufacturing products.

  • Browse:

Add Your Products »

K1000 - Manual Circular Blade PCB Depanelizer

Depaneling

Economical Manual and Motorized Depaneling of Pre-scored PCBs Blades Made of Long Lasting High Speed Steel.. Singulate Panels with Components up to 2.5" Adjustable front blade guard for correct scorel...

FKN Systek

K1000 - Manual Circular Blade PCB Depanelizer

S200 Automatic Single Line Depaneling Saw

Depaneling

The S200 is a semiautomatic diamond blade depaneling saw which will cut a populated PCB panel one line at a time. The operator places the panel onto the input tray and positions the cutting line over the blade travel path. Pushing the...

FKN Systek

S200 Automatic Single Line Depaneling Saw

C200 Pneumatic Crimp Tool

Cable & Wire Harness Equipment

Low Cost Table Top Crimp Machine. The C 200 is a table top low cost crimp tool which takes a variety of dies from different manufacturers. Air operated using standard factory air (5 bar min), with a pressing capacity of up to 1,200 kp,...

FKN Systek

C200 Pneumatic Crimp Tool

S300 - Multiple Blade PLC Controlled PCB Depaneling Saw

Depaneling

Cut panels without scoreline and with overhanging components. The S300 diamond blade depaneling saw is ideal for use in singulating assembled PCBs. Singulate panels up to 12" wide. Mic...

FKN Systek

S300 - Multiple Blade PLC Controlled PCB Depaneling Saw

F9000 Modular PCB Carrier Magazine

Board Handling - Storage

The basic unit for these PCB racks holds 32 boards up to 6.7" (170mm) long. Modules can be assembled side by side to hold longer Printed Circuit Cards. Standard extrusions allow card width of 0 to 10.25". For wider cards, extrusions can...

FKN Systek

F9000 Modular PCB Carrier Magazine

TDK PCB Transport Racks

Board Handling - Storage

Low Cost PCB Transport Racks for up to 50 Printed Circuit Cards of up to 18" (460 mm) deep are made of antistatic material. Side plates can be adjusted from 5.9" (150mm) to 13" (330 mm).Use in TKD Inserter. Specifications:...

FKN Systek

TDK PCB Transport Racks

K4000 - Motorized Linear-Circular Blade PCB Depanelizer

Depaneling

The K4000 motorized linear blade depanelizer is designed for high volume singulation of scored and skip scored Printed Circuit Boards. No programming necessary. (Switch select operating mode and speed) Singulate panels...

FKN Systek

K4000 - Motorized Linear-Circular Blade PCB Depanelizer

99-0012 - Pin Grid Array Extractors

Rework & Repair Equipment

Pin Grid Array Extractors are available in two sizes and provide a quick and safe way to extract Pin Grid Array components from their sockets. All component sizes can be accommodated, as the tool is available in two or four grip models. Adjusting...

FKN Systek

99-0012 - Pin Grid Array Extractors

K5000 - Multiple Blade Circular Blade PCB Depanelizer

Depaneling

Manual board feed PCB multiple panel singulation Singulate panels with up to 10 scorelines. Singulate panels with components up to 2.5" 3 models available: - Output tray - St...

FKN Systek

K5000 - Multiple Blade Circular Blade PCB Depanelizer

F9004 - Side by side PCB transport racks hold up to 100 PCBs

Board Handling - Storage

Side by side stackable PCB transport racks for up to 100 printed circuit cards of up to 7.4" (190 mm) deep are made of antistatic material. Side plates can be adjusted from .7" (20mm) to 9.8" (250 mm). Specifications:...

FKN Systek

F9004 - Side by side PCB transport racks hold up to 100 PCBs

K6000 - Multiple Blade Circular Blade PCB Depanelizer

Depaneling

Fully automated singulation of up to 10 panels. Singulate Panels with up to 10 Scorelines. Process PCBs with Components up to 2.5" High. Integrated Input and Output Conveyors. Output Convey...

FKN Systek

K6000 - Multiple Blade Circular Blade PCB Depanelizer

F9006 - L Shaped Trays 2 Sizes Hold 30 or 25 PCBs

Board Handling - Storage

These holding trays are designed to handle more flexible PCBs. Support on two sides prevents printed circuit cards from flexing or moving during transport. Available in two sizes to hold 25 or 30 PCBs. Specifications: S...

FKN Systek

F9006 - L Shaped Trays  2 Sizes Hold 30 or 25 PCBs

F9055 - Transport Trolley Holds 200 to 400 Panels.

Board Handling - Storage

Made of anti electrostatic material, this PCB transport cart is sturdy and durable. The cart is good for moving large quantities of heavy boards. Specifications: Size: ( F9054 = 850x550 x1300 mm) - ( F9055 1200 mm x 550...

FKN Systek

F9055 - Transport Trolley Holds 200 to 400 Panels.

F9002 - Double Faceplug Stackable Racks hold 50 cards.

Board Handling - Storage

Double Faceplug Stackable PCB Transport Racks for up to 50 Printed Circuit Cards of up to 12.9" (330 mm) are made of antistatic material. Side plates can be adjusted from 3.2" (80mm) to 9.8" (250 mm). Available with PCB stop rods wh...

FKN Systek

F9002 - Double Faceplug Stackable Racks hold 50 cards.

K3000 - Manual Circular-Linear Blade PCB Depanelizer

Depaneling

Singulate scored and skip scored panels up to 24" long ESD protective mat on back table Adjustable front and back support table Singulate panels with components up to 2.5" high Availab...

FKN Systek

K3000 - Manual Circular-Linear Blade PCB Depanelizer

S100 - Manual Depaneling Saw with Guide Table

Depaneling

The S100 is an economical PCB singulating saw for moderate production volumes and laboratory use. The diamond saw blade with the linear bearing positioning table to guide the PCB to be cut,  allows for  quick and clean singulat...

FKN Systek

S100 - Manual Depaneling Saw with Guide Table

F9051 - Horizontal Stack PCB Transport Cart

Board Handling - Storage

The F9051 PCB Transport Cart has 3 shelves of card guides. Each level can hold fifty 11" long PCBs. The card guides are made of conductive material fo safe and convenient handling of PCBs during assembly. Additional shelves c...

FKN Systek

F9051 - Horizontal Stack PCB Transport Cart

K2000 - Circular Blade PCB Depanelizer with XY table

Depaneling

Reduce scrap due to board handling Issues Economical Manual and Motorized Depaneling of Pre-scored PCBs Blades Made of Long Lasting High Speed Steel.. Singulate Panels with Components up to 2.5"...

FKN Systek

K2000 - Circular Blade PCB Depanelizer with XY table

F9001 Quick Adjust Rack holds up to 50 PCBs

Board Handling - Storage

The F9001 quick adjust PCB Rack has been developed to provide a reasonably priced easy to adjust pcb carrier as an alternative to existing high priced products. The width of the rack can be quickly adjusted for different...

FKN Systek

F9001 Quick Adjust Rack holds up to 50 PCBs

F9100 - Custom Racks Built to Order

Board Handling - Storage

This F9100 PCB Transport Cart is made with the same side panels as the F9054. Built into an extruded aluminum frame, the rack provides for up to 100 large panles to be stored straight down, sideways or horizontally depending on your application.Th...

FKN Systek

F9100 - Custom Racks Built to Order

FKN Systek

Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.

Millis, Massachusetts, USA

Manufacturer of Assembly Equipment, Antistatic, Drilling/Routing, OEM

Samsung SME Feeder Finger

Pick & Place

The SME Feeder Finger Solution is designed to work with the Samsung SME Electric Feeder to improve the feeders efficiency and significantly reduce feeder setup and change over time. The operator now can feed cut component tape as short as three in...

Feeder Finger

Samsung SME Feeder Finger

Juki EF08FF Feeder Finger

Pick & Place

The EF Feeder Finger Solution was designed in conjunction with Juki Automation Systems to work with the EF08HSR electronic feeder (black handle) The Feeder Finger coupled with the EF08HSR feeder adds patented features and benefits that enhanc...

Feeder Finger

Juki EF08FF Feeder Finger

Juki CF08FF Feeder Finger

Pick & Place

The CF Feeder Finger Solution was designed in conjunction with Juki Automation Systems to work with the CF081ER mechanical feeder (blue handle) The Feeder Finger coupled with the CF081ER feeder speeds up feeder set-up time by 50% and eliminat...

Feeder Finger

Juki CF08FF Feeder Finger

IPulse F3 Feeder Finger

Pick & Place

The IPE Feeder Finger Solution is designed to work with the iPulse F3 Electronic Feeders to improve the feeder’s efficiency and significantly reduce feeder setup and change over time. The Feeder Finger coupled with the advantages of the elec...

Feeder Finger

IPulse F3 Feeder Finger

Yamaha SS / YS / ZS Feeder Finger

Pick & Place

The YS / SS and ZS Feeder Finger Solution is designed to work with Yamaha’s Electronic Feeders to improve the feeders efficiency by significantly reducing production setup and change-over-time. The Feeder Finger coupled with the advantages o...

Feeder Finger

Yamaha SS / YS / ZS Feeder Finger

ASM Siplace X Feeder Finger

Pick & Place

The ASM Siplace X Feeder Finger Solution Is Designed To Work With The Siplace X Smart Feeder. The Feeder Finger coupled with the Siplace X Smart Feeder adds patented features and benefits that enhance machine utilization and throughput...

Feeder Finger

ASM Siplace X Feeder Finger

Samsung SM Feeder Finger

Pick & Place

The SM Feeder Finger Solution is designed to work with the Samsung SM Pneumatic Feeder to improve the feeders efficiency and significantly reduce feeder setup and change over time. The operator can feed tape strips as short as three inches by...

Feeder Finger

Samsung SM Feeder Finger

Juki RF08FF Feeder Finger

Pick & Place

The RF Feeder Finger Solution was designed in conjunction with Juki Automation Systems to work with the New RS1 pick and place machine. The Feeder Finger coupled with the new RF08AS electronic feeder adds patented features and benefits that e...

Feeder Finger

Juki RF08FF Feeder Finger

Juki AF08FF Feeder Finger

Pick & Place

The AF Feeder Finger Solution was designed in conjunction with Juki Automation Systems to work with the AF081E mechanical feeder (blue handle) The AF feeder is a spliceable feeder, installing the Feeder Finger Solution eliminates the cover ta...

Feeder Finger

Juki AF08FF Feeder Finger

Panasonic CM Feeder Finger

Pick & Place

The Panasonic CM Feeder Finger Solution Is Designed To Work With Feeders Compatible With Panasonic’s CM And NPM Series Pick And Place Machines. The Feeder Finger coupled with Panasonic’s 8mm dual-track feeder adds patented...

Feeder Finger

Panasonic CM Feeder Finger

Feeder Finger

Cut Tape Feeder Products for Printed Circuit Board Assembly (Attaches easily to your existing feeder) (Feeds short segments 3" or the full reel)

San Diego, California, USA

Manufacturer of Assembly Equipment, Assembly, Component Preparation, Pick and Place, OEM

universal 8mm hp DL-60 gold plus feeders

Pick & Place

49889209 8mm High Performance DL-60 (Gold Plus) 49889210 8mm High Performance DL-60 (Gold Plus) 49889211 8mm High Performance DL-60 (Gold Plus) 49889212 8mm High Performance DL-60 (Gold Plus) 49889213 8mm High Performan...

Shenzhen Zhi Honglai Trading Co.,Ltd

universal 8mm hp DL-60 gold plus feeders

hitachi gxh feeder cart

Pick & Place

2、SIGMA/GXH FEEDER CART: GXH-1/GXH-1S FEEDER CART GXH-3 FEEDER CART SIGMA-G5 FEEDER CART GS-FC100 SIGMA-G5S FEEDER CART SIGMA-F8 FEEDER CART SIGMA CART POWER UNIT GS-FC300 SIGMA GS-FC301 GXH...

Shenzhen Zhi Honglai Trading Co.,Ltd

hitachi gxh feeder cart

universal gold plus feeders

Pick & Place

We can supply you the following UNIVERSAL Feeders. Also Feeder Parts, Feeder Storage Carts / Feeder Trolley, Feeder Calibration Jig. 49889209 8mm High Performance DL-60 (Gold Plus) 49889210 8mm High Performance DL-60 (Gold Plus)...

Shenzhen Zhi Honglai Trading Co.,Ltd

universal gold plus feeders

universal gold plus feeders

Pick & Place

universal genesis/fuzion high performace gold feeders from 8mm-88mm (Gold Plus Spliceable) 49889215 - 8 mm High Performance(Gold Plus 60) Dual Lane 7″ 50381214 - 8 mm High Performance (Gold Plus 60) Dual Lane 7″-13″...

Shenzhen Zhi Honglai Trading Co.,Ltd

universal gold plus feeders

hitachi 44/56mm sigma/gxh feeder

Pick & Place

44/56MM     GT-44562/GT-44561/GT-44560 44/56MM     GD-44562/GD-44561/GD-44560 Tel: +86 13640971513 whatsapp:+86 13640971513 Skype: smt-feeders Wechat: 13640971513...

Shenzhen Zhi Honglai Trading Co.,Ltd

hitachi 44/56mm sigma/gxh feeder

hitachi 8mm sigma/gxh feeder

Pick & Place

1、SIGMA/GXH FEEDER: 8MM            GT-38080/GD-38080/GD-38083 8MM            GT-28080/GD-28080/GD-28081/GD28083 8MM&...

Shenzhen Zhi Honglai Trading Co.,Ltd

hitachi 8mm sigma/gxh feeder

hitachi 12/16mm sigma/gxh feeder

Pick & Place

12/16MM      GT-12162/GT-12161/GT-12160 12/16MM      GD-12162/GD-12161/GD-12160 Tel: +86 13640971513 whatsapp:+86 13640971513 Skype: smt-feeders Wechat: 136409...

Shenzhen Zhi Honglai Trading Co.,Ltd

hitachi 12/16mm sigma/gxh feeder

88mm High Performance (Gold Spliceable Deep Pocket)

Pick & Place

51459002 – 88mm High Performance (Gold Spliceable Deep Pocket) Tel: +86 13640971513 whatsapp:+86 13640971513 Skype: smt-feeders Wechat: 13640971513 Email: Tina@smtfeeders.cn Website: http://www.sm...

Shenzhen Zhi Honglai Trading Co.,Ltd

88mm High Performance (Gold Spliceable Deep Pocket)

hitachi 72mm sigma/gxh feeder

Pick & Place

72MM           GT-72002/GD-72002/GT-72001/GT72000 Tel: +86 13640971513 whatsapp:+86 13640971513 Skype: smt-feeders Wechat: 13640971513 Email: Tina@s...

Shenzhen Zhi Honglai Trading Co.,Ltd

hitachi 72mm sigma/gxh feeder

SIGMA Vibratory Stick Feeder 

Pick & Place

SIGMA Vibratory Stick Feeder   GS-FB100 GXH Vibratory Stick Feeder      CS-G100 SIGMA Flux Dispensing Unit  FX-G200 GXH Flux Dispensing Unit    FX-G100 SIGMA RECYCLE C...

Shenzhen Zhi Honglai Trading Co.,Ltd

SIGMA Vibratory Stick Feeder 

Universal feeders

Pick & Place

We are Professional to buy and sell used universal Genesis / Advantis Gold / Green electric feeders: Universal Gold / Green double 8mm Universal Gold / Green single 8mm Universal Gold / Green 12mm Universal...

Shenzhen Zhi Honglai Trading Co.,Ltd

Universal feeders

12/16MM      GT-12162/GT-12161/GT-12160

Pick & Place

HITACHI/YAMAHA SIGMA-G5/G5S/F8/F8S GXH-1/1S/3 1、SIGMA/GXH FEEDER: 8MM            GT-38080/GD-38080/GD-38083 8MM          ...

Shenzhen Zhi Honglai Trading Co.,Ltd

12/16MM      GT-12162/GT-12161/GT-12160

hitachi 24/32mm sigma/gxh feeder

Pick & Place

24/32MM     GT-24322/GT-24321/GT-24320 24/32MM     GD-24322/GD-24321/GD-24320 Tel: +86 13640971513 whatsapp:+86 13640971513 Skype: smt-feeders Wechat: 13640971513...

Shenzhen Zhi Honglai Trading Co.,Ltd

hitachi 24/32mm sigma/gxh feeder

8mm GT08080/GT18080/GT28080/GT38080 Feeders

Pick & Place

HITACHI/YAMAHA SIGMA-G5/G5S/F8/F8S GXH-1/1S/3 1、SIGMA/GXH FEEDER: 8MM            GT-38080/GD-38080/GD-38083 8MM          ...

Shenzhen Zhi Honglai Trading Co.,Ltd

8mm GT08080/GT18080/GT28080/GT38080 Feeders

universal feeder transfer cart

Pick & Place

Feeder Transfer Cart: 49401802 Feeder Transfer Cart 49401804 Feeder Transfer Cart 49401805 Feeder Transfer Cart 49401807 Feeder Transfer Cart 49401808 Feeder Transfer Cart 49401809 Feeder Transfer Cart...

Shenzhen Zhi Honglai Trading Co.,Ltd

universal feeder transfer cart

SIGMA/GXH FEEDER CART

Pick & Place

2、SIGMA/GXH FEEDER CART: GXH-1/GXH-1S FEEDER CART GXH-3 FEEDER CART SIGMA-G5 FEEDER CART GS-FC100 SIGMA-G5S FEEDER CART SIGMA-F8 FEEDER CART SIGMA CART POWER UNIT GS-FC300 SIGMA GS-FC301 GXH...

Shenzhen Zhi Honglai Trading Co.,Ltd

SIGMA/GXH FEEDER CART

universal 44mm hp gold plus with spliceable tape feeder

Pick & Place

51458701 44mm High Performance (Gold) Spliceable Tape Feeder 51458702 44mm High Performance (Gold) Spliceable Tape Feeder Email: Tina@smt-store.com Website: http://www.smtfeeders.cn     ...

Shenzhen Zhi Honglai Trading Co.,Ltd

universal 44mm hp gold plus with spliceable tape feeder

88mm High Performance (Gold Spliceable Deep Pocket)

Pick & Place

51459002 – 88mm High Performance (Gold Spliceable Deep Pocket) Tel: +86 13640971513 whatsapp:+86 13640971513 Skype: smt-feeders Wechat: 13640971513 Email: Tina@smtfeeders.cn Website: http://www.sm...

Shenzhen Zhi Honglai Trading Co.,Ltd

88mm High Performance (Gold Spliceable Deep Pocket)

8mm GT08080/GT18080/GT28080/GT38080 Feeders

Pick & Place

HITACHI/YAMAHA SIGMA-G5/G5S/F8/F8S GXH-1/1S/3 1、SIGMA/GXH FEEDER: 8MM            GT-38080/GD-38080/GD-38083 8MM          ...

Shenzhen Zhi Honglai Trading Co.,Ltd

8mm GT08080/GT18080/GT28080/GT38080 Feeders

Hitachi feeders and spare parts

Component Programming

HITACHI GXH-1/GXH-3/SIGMA G5/G5S/F8 Feeders 4MM        GT-24040/GT-34040 8MM        GT-08080/GT-08081/GT-08082/GT-08083 8MM        GT-18080B/GT-18081B/GT-18082B/GT-18...

Shenzhen Zhi Honglai Trading Co.,Ltd

Hitachi feeders and spare parts

Shenzhen Zhi Honglai Trading Co.,Ltd

Our main business: Buy and sell new or used SMT FEEDERS and SPARE PARTS.

shenzhen, China

Manufacturer of Assembly Equipment, Manufacturer of Assembled PCBs, Pick and Place, Equipment Dealer / Broker

TR7600LL SIII - 3D CT AXI for Extra Large Board Inspection

Inspection

The TR7600LL SIII series CT AXI is a new generation of TRI's hallmark inline PCBA inspection solutions. Designed for 100% inspection coverage of very large boards, the TR7600LL SIII delivers industry's fastest high resolution imaging performa...

TRI - Test Research, Inc. USA

TR7600LL SIII - 3D CT AXI for Extra Large Board Inspection

TR518 SII Manufacturing Defects Analyzer (MDA)

Test Equipment - Bond Testers

Built around the successful and reliable TR518 series platform, the TR518 SII MDA now provides its excellent performance combined with friendly Windows 7 user interface design and USB interface connection to test PC or notebook. With up to 2560 an...

TRI - Test Research, Inc. USA

TR518 SII Manufacturing Defects Analyzer (MDA)

TR7700 SIII 3D - High Coverage & Speed 3D AOI

Inspection

TRI’s ground breaking 3D AOI solution delivers the fastest hybrid PCB inspection combining optical and blue-laser-based true 3D profile measurement for the highest automated defect symptom coverage possible. Integrated state-of-the-art software...

TRI - Test Research, Inc. USA

TR7700 SIII 3D - High Coverage & Speed 3D AOI

TR7600XLL SII CT - XXL Board 3D X-ray Inspection

Inspection

TR7600XLL SII CT is high performance and high speed 3D AXI for the largest server, networking and power PCBs. The TR7600XLL SII system uses TRI's unique shadow-free technology to inspect multi-layer boards with 2/3-layer PoPs, µBGAs, QFNs a...

TRI - Test Research, Inc. USA

TR7600XLL SII CT - XXL Board 3D X-ray Inspection

TR7700 SII Plus - World's First Hybrid AOI

Inspection

Utilizing a new hybrid inspection design, the TR7700 SII Plus can leverage both stop-and-go strategy and dynamic imaging to achieve optimal inspection performance on all types of PCBAs, e.g.: Inspection Cycle Time Reduction. Simply switch the inspect...

TRI - Test Research, Inc. USA

TR7700 SII Plus - World's First Hybrid AOI

TR7500QE - 3D Automated Optical Inspection System

Inspection

The TR7500QE AOI offers high performance 3D solder and assembly inspection by combining the next generation multi-angle 2D and 3D technologies based on 4-way adaptive digital fringe pattern projection and 4 side view cameras. Latest inspection sof...

TRI - Test Research, Inc. USA

TR7500QE - 3D Automated Optical Inspection System

TR7700QE 3D Automated Optical Inspection Solution

Inspection

The TR7700QE AOI offers high performance 3D solder and assembly inspection by combining the next generation 2D and 3D technologies based on 4-way adaptive digital fringe pattern projection. Latest inspection software ensures quick CAD-based progra...

TRI - Test Research, Inc. USA

TR7700QE 3D Automated Optical Inspection Solution

TR7700QI - High Accuracy 3D AOI

Inspection

The TR7700QI 3D AOI combines the latest of 2D and 3D technologies based on digital quad fringe pattern projection to revolutionize PCB assembly inspection. The versatile programmable 3D digital fringe pattern technology covers a huge inspection...

TRI - Test Research, Inc. USA

TR7700QI - High Accuracy 3D AOI

TR7500 SIII 3D - Fastest Multi-Angle AOI

Inspection

TRI’s optimum 3D AOI solution delivers the fastest multi-angle PCB inspection coupled with blue-laser-based true 3D profile measurement for the highest automated optical defect symptoms coverage possible. Combining state-of-the-art software sol...

TRI - Test Research, Inc. USA

TR7500 SIII 3D - Fastest Multi-Angle AOI

TR7700 SIII DT Automated Optical Inspection Solution

Inspection

TR7700 SIII DT is a high performance desktop AOI solution designed for maximum precision and ease of use. Using TRI’s exclusive multi-phase lighting and next generation inspection software, TR7700 SIII DT delivers excellent defect detection...

TRI - Test Research, Inc. USA

TR7700 SIII DT Automated Optical Inspection Solution

TR5001T SII Tiny In-Circuit Tester

Test Equipment - Bond Testers

TR5001T SII TINY is a new generation of TRI's Tiny In-Circuit Tester. Offering up to 640 testing points and extending coverage with Boundary Scan, the TR5001T SII TINY brings an extended ICT feature set in the industry's most compact and a...

TRI - Test Research, Inc. USA

TR5001T SII Tiny In-Circuit Tester

TR7710 DT - Stop-and-Go Desktop AOI

Inspection

The TR7710 DT is an economical, flexible stop-and-go desktop AOI solution that combines a precise high resolution camera system and TRI's exclusive multi-phase lighting to capture detailed PCB panel images. New optical solution offers increased D...

TRI - Test Research, Inc. USA

TR7710 DT - Stop-and-Go Desktop AOI

TR5001 SII QDI Series In-Circuit Tester (ICT)

Test Equipment - Bond Testers

Next generation ICT+FCT solution offers breakthrough performance Multi-Core Parallel/Merged Core testing with up to 4 independent cores for high-throughput testing. TRI's most advanced manual handler features industry-approved hands-free...

TRI - Test Research, Inc. USA

TR5001 SII QDI Series In-Circuit Tester (ICT)

TR7500 SIII CI Conformal Coating Inspection Solution

Inspection

TR7500 SIII CI brings easy Conformal Coating Inspection that combines a multi-camera optical design with specialized multi-phase lighting to inspect UV-active Conformal Coatings. Included angle view cameras ensure the TR7500 SIII CI identifies eve...

TRI - Test Research, Inc. USA

TR7500 SIII CI Conformal Coating Inspection Solution

TR7600F3D - 3D CT X-ray Inspection

Inspection

The TR7600F3D presents a next generation inspection platform for the most demanding PCB design. The inline CT AXI solution combines ultra-high resolution imaging with high definition planar CT inspection, a new robust hardware platform and a redesign...

TRI - Test Research, Inc. USA

TR7600F3D - 3D CT X-ray Inspection

TR7600 XM / XLL SII - High Performance 3D AXI

Inspection

TR7600XM SII and TR7600XLL SII are high performance and high speed 3D AXI for the largest server, networking and power PCBs. The TR7600XM SII and TR7600XLL SII systems use TRI's unique shadow-free technology to inspect multi-layer boards with 2/3...

TRI - Test Research, Inc. USA

TR7600 XM / XLL SII - High Performance 3D AXI

TR7007QI - 3D Solder Paste Inspection System

Inspection

Built upon latest 3D projection technology, the TR7007QI SPI offers industry leading inspection accuracy for the most demanding applications. The inline inspection system automatically optimizes the inspection route for best performance, and TRI&r...

TRI - Test Research, Inc. USA

TR7007QI - 3D Solder Paste Inspection System

TR7600 SIII CT 3D Automated X-Ray Solution

Inspection

The TR7600 SIII series CT AXI is a new generation of TRI’s hallmark inline PCBA inspection solutions. Designed for 100% inspection coverage at production line speed, the TR7600 SIII combines industry’s fastest high resolution imaging s...

TRI - Test Research, Inc. USA

TR7600 SIII CT 3D Automated X-Ray Solution

TR7700 SIII Plus - Multi-Phase 3D AOI

Inspection

TR7700 SIII Plus is the newest generation of TRI's AOI solutions, delivering precise multi-phase inspection at full speed. By combining an ultra-fast camera, intelligent auto conveyor, and new GUI, the TR7700 SIII Plus offers a powerful and easy...

TRI - Test Research, Inc. USA

TR7700 SIII Plus - Multi-Phase 3D AOI

TR8100LV In-Circuit Tester (ICT)

Test Equipment - Bond Testers

Designed for testing large and complex PCBAs, the TR8100LV is TRI’s top-of-the-line board test system targeting the low-voltage testing market. TR8100LV’s vacuum system ensures full pin contact and with up to 3,584 pin digital MUX-free...

TRI - Test Research, Inc. USA

TR8100LV In-Circuit Tester (ICT)

TRI - Test Research, Inc. USA

Test Research, Inc. is the World's leading supplier of Test and Inspection Solutions in the PCBA Manufacturing Test & Inspection Industry. From 3D SPI, 3D AOI and 3D AXI Systems to MDA, ICT and Functional Test. Industry 4.0 Ready.

San Jose, California, USA

Inspection, Manufacturer of Test Equipment

Summit 750 - SMT Rework Station

Rework & Repair Equipment

The Summit 750 is a Rework system specifically designed to satisfy the needs of users who demand high performance and advanced process control at an affordable price. Incorporating features normally only found on much higher priced equip...

VJ Electronix

Summit 750 - SMT Rework Station

XQuik with AccuCount - Compact Benchtop X-ray Inspection System with Component Reel Counting

Inspection

XQuik is a compact benchtop X-ray inspection system for inspecting small items with varying density. Now, with AccuCount technology, the X-Quik is even more versatile allowing for component reel counting in just seconds. The VJ Electro...

VJ Electronix

XQuik with AccuCount - Compact Benchtop X-ray Inspection System with Component Reel Counting

XQuik Benchtop X-ray Inspection System

Inspection

VJT XQuik is our answer to a compact X-ray inspection system for laboratory and industrial settings inspecting small items with varying density. XQuik has been constructed on four major principles: Compact Size: Small...

VJ Electronix

XQuik Benchtop X-ray Inspection System

400ST Plated Through-Hole rework system

Rework & Repair Equipment

The 400ST provides a controlled convective heating process for rework of Plated Through Hole (PTH)devices. The convection process eliminates copper dissolution issues users experience with traditional Solder Fountain rework methods. Plated Through...

VJ Electronix

400ST Plated Through-Hole rework system

Custom X-ray Inspection Solutions

Inspection

Custom X-ray solutions for multiple electronics and other applications. VJ Electronix supplies non-standard X-ray systems and tools to meet requirements falling outside of our standard X-ray product line. Applications typically fall in...

VJ Electronix

Custom X-ray Inspection Solutions

Summit 1800S Scavenger

Rework & Repair Equipment

Standard Features: 600 W - Dedicated Solder Scavenger Heater Dynamic Height Sensing - real time control of scavenger gap Dual Gas Inlets - (CDA & N2 with Two Stage Pressure Regulator) Top Heat...

VJ Electronix

Summit 1800S Scavenger

400S - Automatic Solder Scavenger System

Rework & Repair Equipment

VJT's 400S is a stand-alone, non-contact scavenging system for the automatic removal of residual solder from a rework site. Based on the well established Summit Scavengers, the 400S provides all the advanced features necessary...

VJ Electronix

400S - Automatic Solder Scavenger System

Summit 1800 Rework Station

Rework & Repair Equipment

VJ Electronix proudly offers the Summit 1800 within the SRT Series. The Summit 1800 Automated Rework system developed by SRT and further refined by VJ Technologies, is the industry’s standard for Rework systems. The Summit 1800 provides the...

VJ Electronix

Summit 1800 Rework Station

Summit II High Performance Rework Systems

Rework & Repair Equipment

The Latest in High Performance Rework Systems. Summit II combines the latest rework technologies and ergonomics with the throughput, accuracy and reliability of the renowned Summit product family. Summit II features a reduced foot...

VJ Electronix

Summit II High Performance Rework Systems

Summit LXi SMD Rework Station

Rework & Repair Equipment

Optimized Rework Process for Large PCB. Unlike other large board systems that are adapted versions of standard systems, the Summit LXi platform is the only rework system designed from the ground up to rework large boards. The LXi&rsquo...

VJ Electronix

Summit LXi SMD Rework Station

400R Semi-Automatic SMD Rework System

Rework & Repair Equipment

The 400R semi-automatic rework system is a high value flexible machine with a small foot-print. The 400R is designed to rework BGA, μBGA and other SMT assemblies. The 400R is “production ready” with many a...

VJ Electronix

400R Semi-Automatic SMD Rework System

XQuik II Auto Load with AccuCount Technology

Inspection

First We Made It Easy… Now we Made It Faster! XQuik II Auto Load provides automatic load and unload of reels offering a substantially faster part counting process. While scanning and counting of the reels take place, the operato...

VJ Electronix

XQuik II Auto Load with AccuCount Technology

VERTEX II Next Generation Affordable X-ray Inspection

Inspection

VJ Electronix leads the way in providing robust and practical X-ray solutions to solve real production issues. Innovation and simplicity govern system design to maximize ease-of-use with programmed inspection and a simple 1–2–Go! user...

VJ Electronix

VERTEX II Next Generation Affordable X-ray Inspection

400M BGA Manual Rework System

Rework & Repair Equipment

VJT's 400M BGA manual rework system is a low cost flexible machine with a small foot-print (28" x 28"). It is designed for the removal, placement and alignment of BGA, uBGA, CSP, SMT, MCM, and THT assemblies. Production ready with ad...

VJ Electronix

400M BGA Manual Rework System

Summit 2200 SMD Automatic Rework Station

Rework & Repair Equipment

VJE Summit 2200 is a fully automated and programmable rework system. It is the latest in a series of systems equipped with a programmable motorized X-Y table, top heater height, pick-up tube , and component theta. Summit 2200 rework syst...

VJ Electronix

Summit 2200 SMD Automatic Rework Station

IR Compact Programmable Preheaters

Rework & Repair Equipment

VJ Electronix proudly offers the IR Preheater Series designed to preheat assemblies that require addition heat to compliment manual soldering and desoldering of SMT, Thru-hole and other applications. Lead-free applications benefit from p...

VJ Electronix

IR Compact Programmable Preheaters

SRT Micra - Mobile Device SMT Rework System

Rework & Repair Equipment

Mobile Device Rework System Revolutionary new heaters and power controls provide extremely high performance. Compact in design with SRT’s latest rework technologies, the Micra addresses the challenges of reworking technologies su...

VJ Electronix

SRT Micra - Mobile Device SMT Rework System

VJ Electronix

Rework and X-ray Inspection solutions for a variety of applications. VJ integrates proven industrial X-ray expertise with advanced SRT automation and NIS X-ray electronics inspection expertise.

Chelmsford, Massachusetts, USA

Manufacturer of Assembly Equipment, Assembly, Inspection, Repair/Rework, Soldering

N210017657AB N210017657AA HOLDER H2 (NPM)

Pick & Place

N210017657AB N210017657AA HOLDER H12 Description: Panasonic NOZZLE HOLDER...

CFG ELECTRONIC TECH CO.,LTD

N210017657AB N210017657AA HOLDER H2 (NPM)

N610064416AA Feeder cart of CM602 CM402

Pick & Place

         N610064416AA Feeder cart for CM602 (Short type) 1. Description: Description: Panasonic Fe...

CFG ELECTRONIC TECH CO.,LTD

N610064416AA Feeder cart of CM602 CM402

N510056943AA N510044462AA N510027476AA 6W MOTOR FOR CM602 (12head unit)

Pick & Place

N510056943AA N510044462AA N510027476AA 6W MOTOR FOR CM602 (12head unit) Description: Panasonic Motors Part No:...

CFG ELECTRONIC TECH CO.,LTD

N510056943AA N510044462AA N510027476AA 6W MOTOR FOR CM602 (12head unit)

N510073915AC Original New Cable for NPM

Pick & Place

N510073915AC Original New Cable for NPM Description: Panasonic Cable Part No:...

CFG ELECTRONIC TECH CO.,LTD

N510073915AC Original New Cable for NPM

N510068212AA FILTER HOLDER FOR NPM

Pick & Place

N510068212AA FILTER HOLDER FOR NPM Description: Panasonic FILTER Part No: N51006...

CFG ELECTRONIC TECH CO.,LTD

N510068212AA FILTER HOLDER FOR NPM

N510054810AA N510002505AA Ball Spline for CM402

Pick & Place

N510054810AA N510002505AA Ball Spline for CM402  Description: Panasonic Ball Spline Part No:...

CFG ELECTRONIC TECH CO.,LTD

N510054810AA N510002505AA Ball Spline for CM402

KXF0DKCAA00 KXF0DKEAA00 FLAT BELT 8.5mm

Pick & Place

Belt KXF0DKCAA00 ,KXF0DKDAA00 ,KXF0DKEAA00 ,KXF0DKFAA00 ,KXF0DKGAA00 , N510010716AA,KXF0E14SA00,N510027770AA,KXF0DXDTA00 ,KXF0DWXZB01  , KXF0DWTDB0...

CFG ELECTRONIC TECH CO.,LTD

KXF0DKCAA00 KXF0DKEAA00 FLAT BELT 8.5mm

N510042737AA N510002508AA N510030833AA 15W original new for CM402

Pick & Place

N510042737AA N510002508AA N510030833AA 15W original new for CM402 Description: Panasonic Motor...

CFG ELECTRONIC TECH CO.,LTD

N510042737AA N510002508AA N510030833AA 15W original new for CM402

N51068432AA N510064335AA Ball Spline for NPM 16head unit

Pick & Place

N510068432AA Ball Spline for NPM 16head unit Description: Panasonic Ball Spline Part No:...

CFG ELECTRONIC TECH CO.,LTD

N51068432AA N510064335AA Ball Spline for NPM 16head unit

N610113699AA NPM H16 NOZZLE HOLDER ( Original new )

Pick & Place

N610113699AA NOZZLE HOLDER FOR NPM Description: Panasonic Nozzle Holder Pa...

CFG ELECTRONIC TECH CO.,LTD

N610113699AA NPM H16 NOZZLE HOLDER ( Original new )

N210098763AB CLAMP FOR CM602 original new

Pick & Place

N210098763AB CLAMP FOR CM602 Description: Panasonic Nozzle Holder Part No: N21009...

CFG ELECTRONIC TECH CO.,LTD

N210098763AB CLAMP FOR CM602 original new

Tempretrue tester of Oven (L9)

Reflow

KIC SlimKICTM provides high accuracy and automation ! 1, The performance superb software The software of automatic analysis of several millions of temperature and speed chain combination, and in a very short period of time (a minute)...

CFG ELECTRONIC TECH CO.,LTD

Tempretrue tester of Oven (L9)

Original New Motor KXF0E1LXA00 50W for CM402 4602N1520E500

Pick & Place

Original New Motor KXF0E1LXA00 50W for CM402 4602N1520E500 Description: Panasonic Motor Part No:...

CFG ELECTRONIC TECH CO.,LTD

Original New Motor KXF0E1LXA00 50W for CM402 4602N1520E500

N610009409AA N610009409AB Original new Nozzle holder for CM402

Pick & Place

N610009409AA BALL SPLINE CM402 Description: Panasonic Nozzle Holder P...

CFG ELECTRONIC TECH CO.,LTD

N610009409AA N610009409AB Original new Nozzle holder for CM402

N610118455AA SPG SQUEEGEES (L=370mm)

Pick & Place

N610118455AA SPG SQUEEGEES (L=370mm) Description: Panasonic Squeegees set Part No: N6101184...

CFG ELECTRONIC TECH CO.,LTD

N610118455AA SPG SQUEEGEES (L=370mm)

N610009394AC N610009394AB Filter - Holder

Pick & Place

N610009394AC N610009394AB Filter - Holder  Description: Panasonic Nozzle holder Part No:...

CFG ELECTRONIC TECH CO.,LTD

N610009394AC N610009394AB Filter - Holder

N610026749AA KXF0DWVWA00 KXF0DWVWA01 Pressure sensor for CM402

Pick & Place

Description: Panasonic SENSOR Part No: N61002...

CFG ELECTRONIC TECH CO.,LTD

N610026749AA KXF0DWVWA00 KXF0DWVWA01 Pressure sensor for CM402

N510028646AB N510028646AA Cable ( Original New )

Pick & Place

N510028646AB N510028646AA Cable ( Original New ) Description: Panasonic Feeder Cable Part No:...

CFG ELECTRONIC TECH CO.,LTD

N510028646AB N510028646AA Cable ( Original New )

N610001943AA CM602 CAMERA Original new

Pick & Place

N610001943AA CM602 CAMERA Original new  Description: Panasonic Camera Part...

CFG ELECTRONIC TECH CO.,LTD

N610001943AA CM602 CAMERA Original new

MTNM000016AA

Pick & Place

MTNM000016AA / N510048142AA 9.6W DC MOTOR Description: Panasonic DC MOTOR Part...

CFG ELECTRONIC TECH CO.,LTD

MTNM000016AA

CFG ELECTRONIC TECH CO.,LTD

CFG provide machines and spare parts for SMT especially Panasonic. All kinds of spare parts and machines in stock!

SHENZHEN, China

Manufacturer of Assembly Equipment, Pick and Place, Screen Printing, Equipment Dealer / Broker

CameraLink High Resolution Industrial Cameras

Inspection

The CameraLink industrial digital cameras offer high performance in a very small footprint. The advanced 25M color CMOS sensor provides the absolute best image quality at an incredible frame rate of 30 fps! The camera Link Interface ensures High s...

ISVI - Industrial Sensor Vision International Corporation

CameraLink High Resolution Industrial Cameras

CoaXPress High Resolution Industrial Cameras

Inspection

The CoaXPress series cameras operate 72fps with ZERO-ROT function at 8bit/10bit CXP-6 4CH It provides advanced technology of vision solution Sensor : 25MP Color & Mono CMOS Sensor (Global & Rolling Shutter)...

ISVI - Industrial Sensor Vision International Corporation

CoaXPress High Resolution Industrial Cameras

ISVI - Industrial Sensor Vision International Corporation

Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.

Oxford, Connecticut, USA

Inspection

Humidity Indicator Cards and Plugs

ESD Control Supplies

Following the most rigorous quality standards, including strict color meter testing, Clariant's humidity indicator cards and humidity indicator plugs are designed to meet standards set forth by military agencies and electronic/semiconductor compa...

Clariant Cargo & Device Protection

Humidity Indicator Cards and Plugs

CESA®-stat Antistatic Agents

ESD Control Supplies

Static charges that build up on the surface of plastic products attract dust and dirt, cause sheet and film to cling and stacked products to stick together. A sudden discharge of static can damage products like computer chips or even cause a fire...

Clariant Cargo & Device Protection

CESA®-stat Antistatic Agents

Bentonite Desiccants for Moisture Controlled Packaging

ESD Control Supplies

The natural sustainable desiccant solution for moisture controlled packaging Desiccants are hygroscopic (moisture-adsorbent) substances that are packaged and used to protect a broad range of products from degradation due to moisture, h...

Clariant Cargo & Device Protection

Bentonite Desiccants for Moisture Controlled Packaging

Humidity Indicator Card - Humitector™ Type 2 Non Reversible

ESD Control Supplies

Humitector™ Type 2 Humidity Indicator Card, used together with a Desi Pak® desiccant, can help provide a complete history of a dry pack environment for moisture sensitive surface...

Clariant Cargo & Device Protection

Humidity Indicator Card - Humitector™ Type 2 Non Reversible

Exolit® OP 930 Flame Retardant for Epoxy Laminate Systems.

ESD Control Supplies

Exolit OP 930 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 930 can easily be dispers...

Clariant Cargo & Device Protection

Exolit® OP 930 Flame Retardant for Epoxy Laminate Systems.

Dessicant Cartridges

Board Handling - Storage

Protection for moisture sensitive products with visual humidity inspection. Desiccant cartridges provide protection against moisture related issues for a wide range of applications in containers, cases, electrical and optical devices....

Clariant Cargo & Device Protection

Dessicant Cartridges

Clariant Cargo & Device Protection

Clariant Cargo & Device Protection offers a complete portfolio of desiccants and humidity indicator cards for use in dry packing.

Belen, New Mexico, USA

Component Packaging

GW-XS330 Automatic Sucking Loader

Board Handling - Conveyors

Model No: GW-XS330  Automatic Sucking Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single pha...

Dongguan Kingsun Technology Co.,Ltd.

 GW-XS330  Automatic Sucking Loader

GW-UL460 Automatic un Loader

Board Handling - Conveyors

Model No: GW-UL460 Automatic un Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A...

Dongguan Kingsun Technology Co.,Ltd.

 GW-UL460 Automatic un Loader

GW-NG390 NG/OK un loader

Board Handling - Conveyors

product instruction ※PLC control system, Working is stably and reliably ※Easy to operate touch screen control interface ※the pneumatic clamps of top and bottom three     point provided for the...

Dongguan Kingsun Technology Co.,Ltd.

GW-NG390 NG/OK un loader

GW-ZT350 Automatic 90 degrees Turning Machine

Board Handling - Conveyors

Model No:GW-ZT350 Automatic 90 degrees Turning Machine Cycle time:Approx 15seconds  Power supply:100-230V AC (customized), single phase  Power load:Max 300V/A Air pressure: 4-6 bar A...

Dongguan Kingsun Technology Co.,Ltd.

GW-ZT350 Automatic 90 degrees Turning Machine

GW-PY250 Automatic mobile conveyor

Board Handling - Conveyors

product instruction ※PLC control system, Working is stably and reliably ※Easy to operate touch screen control interface ※ Fast, stable and accurate stepper motor moves ※Enclosed design ensure the highes...

Dongguan Kingsun Technology Co.,Ltd.

GW-PY250 Automatic mobile conveyor

GW-XS460 Automatic Sucking Loader

Board Handling - Conveyors

Model No: GW-XS460 Automatic Sucking Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MA...

Dongguan Kingsun Technology Co.,Ltd.

GW-XS460 Automatic Sucking Loader

GW-GD350T Automatic magazine buffer

Board Handling - Conveyors

product instruction ※ PLC control system, Working is stably and reliably ※ Easy to operate touch screen control interface ※ Memory function, control the order of      PCB`s pass in a...

Dongguan Kingsun Technology Co.,Ltd.

GW-GD350T Automatic magazine buffer

GIC-R05 JUKI Feeder Calibration

Pick & Place

GIC-R05 JUKI Feeder Calibration GIC-R05 JUKI Feeder Calibration JIG It is essential for this equipment that enhanced productivity , installation and quality improvement As the high efficiency vision camera is asked in...

Dongguan Kingsun Technology Co.,Ltd.

GIC-R05 JUKI Feeder Calibration

CR-6004-L Telescopic Gate Conveyor

Board Handling - Conveyors

product instruction ※ Easy to operate touch screen control interface ※Telescopic structure, width adjustable, easy to walk ※ Photoelectric sensors with protection, more secure ※  Smooth a...

Dongguan Kingsun Technology Co.,Ltd.

CR-6004-L Telescopic Gate Conveyor

GW-XB460 Automatic vacuum loader

Board Handling - Conveyors

Model No: GW-XB460 Automatic vacuum loader MAX PCB`s capacity: 300pcs (0.6mm thickness PCB) cycling time:  Approx 6 seconds Power supply: 100-230V AC (customized), single phase...

Dongguan Kingsun Technology Co.,Ltd.

GW-XB460 Automatic vacuum loader

GW-GD350S Accordion conveyer

Board Handling - Conveyors

product instruction ※Stable and reliable integrated control system ※Floding down and special air circuit design.     lifting  speed smoothly ※ Smooth and parallel width adjustment ...

Dongguan Kingsun Technology Co.,Ltd.

GW-GD350S Accordion conveyer

GW-XB350 Automatic vacuum loader

Board Handling - Conveyors

Model No: GW-XB350 Automatic vacuum loader MAX PCB`s capacity: 300pcs (0.6mm thickness PCB) cycling time:  Approx 6 seconds Power supply: 100-230V AC (customized), single phase...

Dongguan Kingsun Technology Co.,Ltd.

GW-XB350 Automatic vacuum loader

GW-NG460 NG/OK un loader

Board Handling - Conveyors

product instruction ※PLC control system, Working is stably and reliably ※Easy to operate touch screen control interface ※the pneumatic clamps of top and bottom three     point provided for the...

Dongguan Kingsun Technology Co.,Ltd.

GW-NG460 NG/OK un loader

GW-UL250L Automatic Single Magazine Un loader

Board Handling - Conveyors

Model No: GW-UL250L Automatic Single Magazine Un loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A...

Dongguan Kingsun Technology Co.,Ltd.

GW-UL250L Automatic Single Magazine Un loader

GW-BC35 Inspection Connection Stand

Board Handling - Conveyors

Model No: GW-BC35 Inspection Connection Stand Power supply: 100-230V AC (customized), single phase Power load:  MAX 100V/A Transport height: 900±20mm (or customized) Transport dire...

Dongguan Kingsun Technology Co.,Ltd.

GW-BC35 Inspection Connection Stand

GW-GD460Z Automatic Buffer

Board Handling - Conveyors

product instruction ※ PLC control system, Working is stably and reliably ※ Easy to operate touch screen control interface ※FIFO(first in first out), LIFO(last in first out) and     pass throug...

Dongguan Kingsun Technology Co.,Ltd.

GW-GD460Z Automatic Buffer

GW-GD460S Accordion conveyer

Board Handling - Conveyors

product instruction ※Stable and reliable integrated control system ※Floding down and special air circuit design.     lifting  speed smoothly ※ Smooth and parallel width adjustment ...

Dongguan Kingsun Technology Co.,Ltd.

GW-GD460S Accordion conveyer

GW-XS390 Automatic Sucking Loader

Board Handling - Conveyors

Model No: GW-XS390 Automatic Sucking Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized), single phase, MAX...

Dongguan Kingsun Technology Co.,Ltd.

GW-XS390 Automatic Sucking Loader

GW-BC460F Cooling Conveyor

Board Handling - Conveyors

Model No: GW-BC460F Cooling Conveyor Power supply: 100-230V AC (customized), single phase Power load:  MAX 100V/A Transport direction: Left to right/right to left(optional) Transport height:&n...

Dongguan Kingsun Technology Co.,Ltd.

GW-BC460F Cooling Conveyor

GW-XS250 Automatic Sucking Loader

Board Handling - Conveyors

Model No: GW-XS250 Automatic Sucking Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phas...

Dongguan Kingsun Technology Co.,Ltd.

GW-XS250 Automatic Sucking Loader

Dongguan Kingsun Technology Co.,Ltd.

Dongguan KINGSUN Technology is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading, SMT consumables and Peripherals equipment, ESD products

Dongguan, China

Adhesives/Dispensing, Assembly, Inspection, Equipment Dealer / Broker, Distributor

BEST Lead Free SMT Training Kit

Education/Training

BEST SMT training kits feature REAL circuit boards that represent actual soldering conditions. These training kits feature 0.062in  thick multilayer boards which are mor...

soldertools.net

BEST Lead Free SMT Training Kit

DRM-SMT-F Surface Mount Solder Joint Evaluation Training & Reference Guide

Education/Training

Now updated to Revision F of the latest IPC-A-610F and J-STD-001F – the IPC Training & Reference Guide illustrates critical acceptance criter...

soldertools.net

DRM-SMT-F Surface Mount Solder Joint Evaluation Training & Reference Guide

EZReball(TM)

Rework & Repair Equipment

The BEST EZReball™ process is the answer to your reballing problems. This BGA reballing process simplifies the process while eliminating the clean up of all those paper remnants, allowing for better yields and faster reballing times....

soldertools.net

EZReball(TM)

J-STD-001 Rev F Standard

Soldering - Other

IPC J-STD 001 REV E Requirements for Soldered Electrical and Electronic Assemblies.  The IPC J-STD-001F standard is the industry-consensus document with respect to the assembly of PCBs and electronic assemblies. Released August 2014...

soldertools.net

J-STD-001 Rev F Standard

Epoxy Repair Kit

Rework & Repair Equipment

The BEST Epoxy Repair Kit can be used to fix damaged solder mask, damaged PCB laminate material as well as repair lifted pads and traces. 3rd party testing has shown by using the BEST 2-part epoxy, the bond strength of repair traces, pads, and lan...

soldertools.net

Epoxy Repair Kit

Foil SMT Stencil

Printing

SMT Foil Stencils are laser cut solder paste stencils designed to work on their own for hand printing or with stencil tensioning systems. These laser cut stencils do not need to be permanently glued in a frame. These so-called fra...

soldertools.net

Foil SMT Stencil

BEST Lead Free Through-hole Training Kit

Education/Training

BEST Through-hole Training Kits feature REAL circuit boards that represent actual soldering conditions. Thes...

soldertools.net

BEST Lead Free Through-hole Training Kit

DRM-18H Component Identification Training and Reference Guide

Education/Training

The Component Identification Training & Reference Guide is a valuable tool for employee training and quick reference. This comprehensive component identification re...

soldertools.net

DRM-18H Component Identification Training and Reference Guide

PCB Pad Repair Kit Dry Film Version

Rework & Repair Equipment

The BEST Pad Repair kit dry film version includes the tools and materials needed to reliably replace lifted or damaged surface mount and BGA pads on PCB's. This kit includes 3 different tin plated copper base material circuit...

soldertools.net

PCB Pad Repair Kit Dry Film Version

IPC-7711/21B Rework, Modification and Repair of Electronic Assemblies

Education/Training

This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards! IPC-7711B/7721B Rework, Modification and Repair of Electronic Assem...

soldertools.net

IPC-7711/21B Rework, Modification and Repair of Electronic Assemblies

PCBVac(TM)

Rework & Repair Equipment

The PCBVac(TM) is the only tool you will need to get rid of BOTH dry and wet media from a PCB. It is like a shop vac for your PCB repair needs. This is the ideal tool for a soldering technician’s work bench being able to provide ma...

soldertools.net

PCBVac(TM)

IPC-A-600H Standard

Education/Training

IPC A-600H Acceptability of Electronic Assemblies. The IPC-A-600, "Acceptability of Printed Boards " is the most widely used published specification on printed wiring boards. This specification has set the standard for rigid printed boar...

soldertools.net

IPC-A-600H Standard

Trace Repair Kit

Rework & Repair Equipment

The BEST track repair Kit is designed to meet the quality of original trace patterns. The BEST Trace Repair Kits make it simple for you to repair damaged circuit traces on printed circuit boards. BEST circuit tracks...

soldertools.net

Trace Repair Kit

Learning How to Solder Training Kit

Education/Training

If you are trying to instruct new electronic technicians, high schoolers, or DIYers in the skill of soldering and do not want to instruct them on home made PCBs that are not representative of the type parts or the types of surface finish you would...

soldertools.net

Learning How to Solder Training Kit

Board Repair Kit

Rework & Repair Equipment

The BEST PCB board repair kit gives you the tools you need to repair damaged mask, damaged or missing laminate, replace missing corners or missing pieces of the hard laminate material.  Colorants are part of this kit which allows you repair d...

soldertools.net

Board Repair Kit

IPC-T-50 Terms and Definitions Rev M

Education/Training

This standard provides...

soldertools.net

IPC-T-50 Terms and Definitions Rev M

Through-hole Repair Kit

Rework & Repair Equipment

The BEST PCB throughole repair kit gives you the tools you need for fast modification and repair of PCB plated throughhole pads and barrels-no matter what their size. Our online PCB repair training videos, our master ins...

soldertools.net

Through-hole Repair Kit

Printed Circuit Board Repair Kits (PCB)

Rework & Repair Equipment

Quantity Included in Kit Description...

soldertools.net

Printed Circuit Board Repair Kits (PCB)

IPC-A-610 Rev F Standard

Inspection

IPC A-610F Acceptability of Electronic Assemblies. The 610 is the industry standard for the acceptance criteria for assembled PCBs. It is also the instructional book used when teaching IPC-A610 CIS students. Revision...

soldertools.net

IPC-A-610 Rev F Standard

Prototype SMT Stencil

Printing

SMT Prototype Stencils are laser cut solder paste prototype stencils designed to work on their own for hand printing. These laser cut prototype stencils do not need to be permanently glued in a frame. These so-called framelesssten...

soldertools.net

Prototype SMT Stencil

soldertools.net

Soldertools.net is an online storefront for a variety of product categories related to PCB assembly, PCB rework and solder training.

Rolling Meadows, Illinois, USA

Manufacturer of Components, Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Design, Inspection

Cubus - The Next Generation of SMT Storage System

Board Handling - Storage

Flexible, Fully Automatic SMD Storage System. Cubus - the next-generation SMT storage device – innovates how SMT components are stored and provisioned for electronic manufacturing. For the first time, a storage device is fully us...

ESSEMTEC USA

Cubus - The Next Generation of SMT Storage System

Tarantula - Relentless All Terrain High Speed Dispensing

Dispensing

Introducing - The Tarantula - State of the art technology, easily integrated in any line. Wide range of dispensing applications such as Solder Paste and SMT Glue, LED Encapsulation, Silver Epoxy, Dam and Fill, Underfill, Cavity Fill, 3D Dispensing...

ESSEMTEC USA

Tarantula - Relentless All Terrain High Speed Dispensing

Cubus Large - Connective Lean Storage Solution

Board Handling - Storage

Introducing - The Cubus large - The right material, at the right time in the right location. The Cubus can be used as total automated SMD storage solution for small to mid-size companies as well as automated material replenishment units for high t...

ESSEMTEC USA

Cubus Large - Connective Lean Storage Solution

ePlace - Pick & Place Operation Software

Software

ePlace is a newly designed software based on the Essemtec software architecture “eez-Technology”. Fingertip operation Easy to use Universal CAD input Zoom of camera windows...

ESSEMTEC USA

ePlace - Pick & Place Operation Software

RO400FC Full Convection Reflow Oven

Reflow

Versatile reflow oven for medium volume soldering (leadfree or leaded solder). 400 mm process width. Integrated microprocessor for profile control and storage. Extra high air volume for perfect soldering of complex boards....

ESSEMTEC USA

RO400FC Full Convection Reflow Oven

eMIS -Management Information Software

Software

The new eMIS Management Software Suite for SMD production includes functions for job planning, feeder setup optimization, stock management, traceability, operational data analysis, line management and much more. With eMIS, manager...

ESSEMTEC USA

eMIS -Management Information Software

Spider - Compact High Speed Jetter and Dispenser

Dispensing

Essemtec Spider, the extreme fast and compact jet and general dispenser is rated for up to 150 000 dots per hour, dispenses 3D patterns and much more. Only 1 m² production floor Up to 150’000 dots/h (with...

ESSEMTEC USA

Spider - Compact High Speed Jetter and Dispenser

RO300FC Full Convection Reflow Oven

Reflow

Small but powerful reflow oven. 300 mm process width. Sophisticated zone separation between zones enables profiles that are normally possible only on larger and much more expensive systems. Small footprint 2.0x0.7 m. 4 zone conve...

ESSEMTEC USA

RO300FC Full Convection Reflow Oven

ZONDA Modular Full Convection Reflow Oven

Reflow

ZONDA - 7 to 13 zones, freely configurable reflow oven. Zonda is a modular full convection oven for high volume soldering and curing. Number and type of zones is freely configurable to requirements. 7 to 13 zones...

ESSEMTEC USA

 ZONDA Modular Full Convection Reflow Oven

Puma - High Speed Pick & Place and Dispensing

Pick & Place

RELENTLESS STRONG SMT PICK-AND-PLACE Strong, Flexible, Adaptive & Modular.  Expandable in any direction. Introducing - The Puma - State of the art technology. Expandable in any direction. Same a...

ESSEMTEC USA

 Puma - High Speed Pick & Place and Dispensing

SP002 - Manual Fine-pitch Stencil Printer, Guided Squeegee

Printing

Precise stencil printing system for low volumes. Easy to use, highly accurate and reliable printing system. Precise mechanical adjustment and excellent repeatability. Precise squeegee guidance with double squeegee. The SP002...

ESSEMTEC USA

SP002  - Manual Fine-pitch Stencil Printer, Guided Squeegee

Fox - Compact Automatic Pick-and-Place System

Pick & Place

Essemtec Fox can have up to 180 feeder lanes, needs only 1sqm of floor space and can accept PCB’s of up to 406 x 305 mm. 180 feeder lanes within 1 m² production floor Component range from 0201 up to 80x33 mm...

ESSEMTEC USA

Fox - Compact Automatic Pick-and-Place System

ESSEMTEC USA

Essemtec is a worldwide leader in manufacturing of highly flexible Surface Mount Technology (SMT) production equipment - pick-and-place system, dispenser, printer, oven, storage system and software Solutions.

Pitman, New Jersey, USA

Manufacturer of Assembly Equipment, Component Packaging, Pick and Place, Screen Printing, Soldering

TMT-R9800S Soldering Robot

Soldering Robots

The Thermaltronics Robotic System incorporates innovative design concepts and precision components to ensure accuracy. The combination of high precision hardware and intelligent software ensures precision soldering and low operator training costs....

Thermaltronics USA, Inc.

TMT-R9800S Soldering Robot

TMT-PH200 IR Preheater

Rework & Repair Equipment

The TMT-PH200 uses sensor control feedback loop to control the infrared preheater temperature and is suitable for leaded and lead-free preheating processes. The Thermaltronics TMT-PH200 IR Preheater offers totally controllable and stab...

Thermaltronics USA, Inc.

TMT-PH200 IR Preheater

TMT-HA050 Hot Air Rework Tool

Rework & Repair Equipment

The TMT-HA050 hot air tool can be used for the removal of surface mount components such as SOIC, QFP, PLCC and other similar devices. The Thermaltronics TMT-HA050  hot air tool is a portable and flexible hot air rework s...

Thermaltronics USA, Inc.

TMT-HA050 Hot Air Rework Tool

AF-KIT Auto Solder Feeder Kit

Rework & Repair Equipment

Thermaltronics AF-KIT auto solder feeder kit provides for single handed operation during soldering applications. The kit is provided as an accessory to existing Thermaltronics hand soldering tools. Adjustable speed, feed length...

Thermaltronics USA, Inc.

AF-KIT Auto Solder Feeder Kit

TMT-PH600 IR Preheater

Rework & Repair Equipment

The Thermaltronics TMT-PH300 IR Preheater offers totally controllable and stable temperatures from 50°C – 400 °C.  The Thermaltronics TMT-PH300 Infra red (IR) Preheater is ideally used in rework applications where background hea...

Thermaltronics USA, Inc.

TMT-PH600 IR Preheater

TMT-HA600 Hot Air Rework Tool

Rework & Repair Equipment

The TMT-HA600 is suitable for the more difficult applications in the removal and reflow of surface mount components. The TMT-HA600 hot air tool uses a large diaphragm pump and a high power 1300W heater, designed to work on more difficu...

Thermaltronics USA, Inc.

TMT-HA600 Hot Air Rework Tool

TMT-FE100S Fume Extractor

Fume Extraction

The Thermaltronics TMT-FE100S fume extraction unit, takes up minimal benchtop space but is inclusive of a prefilter and a separate HEPA filter, to ensure operator safety. Fan speed can also be adjusted, based on the proximity of the soldering oper...

Thermaltronics USA, Inc.

TMT-FE100S Fume Extractor

TMT-5000S Curie Heat Technology Soldering and Rework Station

Rework & Repair Equipment

The TMT-5000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....

Thermaltronics USA, Inc.

TMT-5000S Curie Heat Technology Soldering and Rework Station

TMT-HA300 Hot Air Rework Tool

Rework & Repair Equipment

The TMT-HA300 hot air tool uses a large diaphragm pump and can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. The Thermaltronics TMT-HA300 Hot Air Tool is a portable...

Thermaltronics USA, Inc.

TMT-HA300 Hot Air Rework Tool

TMT-PH300 IR Preheater

Rework & Repair Equipment

The TMT-PH300 uses advanced intelligent temperature control technology to control the infrared preheater. Three heating modes allow the unit to handle leaded & lead-free preheating processes and are suitable for use with PCB containing BGA and...

Thermaltronics USA, Inc.

TMT-PH300 IR Preheater

TMT-HA200 Hot Air Rework Tool

Rework & Repair Equipment

The TMT-HA200 hot air tool can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. The Thermaltronics TMT-HA200 Hot Air Tool is a portable and flexible hot air rework syst...

Thermaltronics USA, Inc.

TMT-HA200 Hot Air Rework Tool

TMT-9000S Curie Heat Technology Soldering and Rework Station

Rework & Repair Equipment

The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....

Thermaltronics USA, Inc.

TMT-9000S Curie Heat Technology Soldering and Rework Station

TMT-ASTC100 Automatic Solder Tip Cleaner

Rework & Repair Equipment

The TMT-ASTC automatic solder tip cleaner helps rework badly oxidized tips. Two high quality brass brushes, which revolve in opposite directions, aid in the removal of oxidisation from the soldering tip. Removes tip oxidation...

Thermaltronics USA, Inc.

TMT-ASTC100 Automatic Solder Tip Cleaner

TMT-HA100 Hot Air Pencil

Rework & Repair Equipment

The TMT-HA100 hot air pencil is designed to remove and reflow small precision components, integrated circuits and other smaller devices. The Thermaltronics TMT-HA100 hot air pencil is a portable and flexible hot air rewo...

Thermaltronics USA, Inc.

TMT-HA100 Hot Air Pencil

TMT-ST10 Solder Tip Tester

Rework & Repair Equipment

The TMT-ST10 is a three-in-one tip tester, providing tip temperature measurement, tip to ground resistance and tip to ground AC voltage leakage.Test data can be easily saved to memory and exported for data analysis. Data save and...

Thermaltronics USA, Inc.

TMT-ST10 Solder Tip Tester

TMT-TC-2 Tip Tinner

Rework & Repair Equipment

The TMT-TC-2 Tip Tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station. Remo...

Thermaltronics USA, Inc.

TMT-TC-2 Tip Tinner

TMT-2000S Curie Heat Technology Soldering and Rework Station

Rework & Repair Equipment

The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....

Thermaltronics USA, Inc.

TMT-2000S Curie Heat Technology Soldering and Rework Station

Thermaltronics USA, Inc.

Manufacturer of a wide range of Soldering Products & Accessories used in the electronics manufacturing industry.

Great Neck, New York, USA

Repair/Rework, Soldering

Mirrors, Brushes, Spring Hooks, Lead Cleaners

Rework & Repair Equipment

The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budgetary requirement of modern manufacturing. E...

Beau Tech

Mirrors, Brushes, Spring Hooks, Lead Cleaners

Probes

Rework & Repair Equipment

These Made in America, Beau Tech RocHard MilProbes are the only complete line of probes available to meet the full spectrum of circuit repair, rework, and assembly needs from Through Hole to 2 mil pitch Surface Mount....

Beau Tech

Probes

Soldering Rework Tools

Rework & Repair Equipment

The tool ends are made of high quality Swedish Hardened Tool Steel, carefully heat treated and tempered to provide a tough, long lasting working edge that resists wear....

Beau Tech

Soldering Rework Tools

ESD Safe Probes

Rework & Repair Equipment

The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards....

Beau Tech

ESD Safe Probes

Orange Sticks

Rework & Repair Equipment

Orange Sticks with double beveled ends The Beau Tech orange sticks are made of high quality non-resin wood which will not contaminate solder and component leads. Natural wood is among the best material that does not generate static charg...

Beau Tech

Orange Sticks

Beau Tech

A US manufacturer,of quality hand tools for those engaged in the repair, rework, R & D, testing, and assembly of electronic components and printed circuit boards from Through Hole to 2Mil Pitch Surface Mount.

Portland, Maine, USA

Assembly, Inspection, Repair/Rework, Soldering, OEM

DEK Spare parts

Printing

Assorted DEK screen printer replacement parts available now! Featured DEK Parts: DEK Rising Table Brake replacement DEK Camera Controller Board Replacement DEK Euro...

IslandSMT

DEK Spare parts

Fuji Spare Parts

Pick & Place

Fuji CP6 nozzles, CP-4 feeders Featured Fuji Parts: Fuji CP-4 Series D Axis Feeder Roller Height Jig Fuji 1.8mm CP6 Nozzle Fuji 1.3mm CP6 Nozzle Fuji...

IslandSMT

Fuji Spare Parts

Quad Spare Parts

Pick & Place

Assorted Quad/Tyco Pick and Place spare parts available now! Featured Quad Parts: Quad 10-21042 Y limits cable Quad Large cup vacuum under board support Quad Tep 18...

IslandSMT

Quad Spare Parts

Mydata Linescan cameras

Pick & Place

Just in two Mydata Linescna cameras in for the MySeries MyData Machines.  Bother are tested and funtional and ready to go.  Give us a call at 813-880-8262 or email at chris@islandsmt.com...

IslandSMT

Mydata Linescan cameras

DEK 260 Screen Printer Electronics

Printing

DEK Energy Board 128908, DEK Processor PCB 128907, DEK E-Stop Assembly 128913, DEK Pressure Pulse Unit 128985, DEK Touchscreen Interface available for DEK 260 Screen Printers....

IslandSMT

DEK 260 Screen Printer Electronics

Takaya 8400 Spare parts

Test Equipment

We have Takaya 8400 spare parts in stock...

IslandSMT

 

Siemens S15 Spare Parts

Pick & Place

Siemens Servo amp (Star SP, IC D) 00314164 Siemens Servo amp (Star Z, IC Z) 00314165 Siemens Servo Amp X Axis 00302847 Siemens Servo Amp Y Axis 00302846 Siemens Servo Amp (DP1,DP2) 00302843 Siemens Dynami...

IslandSMT

Siemens S15 Spare Parts

SMT Equipment Spare Parts

Pick & Place

Island SMT stocks thousands of unique mechanical and electronic part numbers for a wide variety of Electronic Manufacturing Equipment. From simple fuses to complex imaging components, Island SMT can help with your replacement part requirements....

IslandSMT

SMT Equipment Spare Parts

DEK 265 Repair Service

Printing

Island SMT offers repair exchange and repair return services for the DEK 265 platforms.  Repairable Items include Cognex Vision Card Euro Step Euro Sys Servo Amp,...

IslandSMT

DEK 265 Repair Service

ASTEC Power Supply Repair

Test Equipment

Have a power supply that just went out or will not stay on?  Give us a call at (813) 880-8262 .  We can repair just about any power supply up to 1200W DC.  We have had a lot of success over the years repairing a wide variety of...

IslandSMT

ASTEC Power Supply Repair

Mydata Repair Services

Pick & Place

Island SMT now offers a repair services in addition to selling Mydata parts.  Did your 3PT card go out? Your MOT card acting a little odd?  Take advantage of a low cost solution for repairing your Mydata parts and give us a call at 81...

IslandSMT

Mydata Repair Services

DEK Infinity Screen Printer Repairs

Printing

Island SMT is now offering repair options for the electronics in the DEK Infinity Screen Printer.  Power Supplies, Motherboards, I/O Boards, CAN Boards and more.  Contact us at 813-880-8262 or visit our website www.islandsmt.com...

IslandSMT

DEK Infinity Screen Printer Repairs

Assembleon AX Nozzles

Pick & Place

Various Assembleon AX Nozzles.  V- series, L-series, CPL and SL Featured Assembleon Parts: Assembleon AX Vision placement Tools Assembleon AX Laser Heads AX 30...

IslandSMT

Assembleon AX Nozzles

Equipment Training

Education/Training

Have a piece of gear transfered in no one knows how to use?  Did you buy a machine second hand and now need to know how to program it?  Island SMT offers training for a variety of equipment. Some manufacturers we can help with are ...

IslandSMT

Equipment Training

Flying Probe Test Services

Test Services

We have completed installation of our Seica Flying prober and are very excited about offering test services. Customers can now outsource their Flying Probe Test requirements to Island SMT. Flying Probe is an excellent test solution for short run, pro...

IslandSMT

Flying Probe Test Services

Mydata Spare Parts

Pick & Place

Mydata Spare Parts Featured Mydata parts: MyData replacement motors MyData ZFIB PCA MyData calibration boards MyData X-rail grease gun...

IslandSMT

Mydata Spare Parts

DEK 265 Electronics Repair

Printing

Island SMT offers a full compliment of repair services for your DEK 265 Euro Step, amp cards and communication cards.  Repair return and repair exchange options are available for most 265 electronics.  Give us a call 813-880-8262...

IslandSMT

DEK 265 Electronics Repair

Cencorp Router Spare Parts

Depaneling

We have just uploaded 16 new Cencorp Router part numbers to the catalog.  Most of them coming from a Cencorp 1001 SR machine.  All of the parts are BRAND NEW and in the original packaging.  The items include motors, servo amps, a...

IslandSMT

Cencorp Router Spare Parts

MPM Spare Parts

Printing

MPM SPM Spare Parts Featured MPM Parts: MPM Screen Printer 300 Squeege Holder Z Drive Assy Stepper Motor MPM SPM Footswitch SPM Assembly Z Motor Sensor...

IslandSMT

MPM Spare Parts

Seica Pilot

Test Equipment

NEW Seica Pilot S20 and LX Heads are available on our website!  Call for details and pricing...

IslandSMT

Seica Pilot

IslandSMT

Spare Parts for Manufacturing and Test Equipment. Offers Repair Services of SMT and ICT machinery. Flying probe test services.

Tampa, Florida, USA

Repair/Rework, Test Services, Equipment Dealer / Broker

Select Coat SL-940 Conformal Coating System

Coating Equipment

The Select Coat® conformal coating machine provides the highest productivity and quality for your automated coating processes. Automate your conformal coating with state-of-the-art process controls, world-leading know-how,...

Nordson ASYMTEK

Select Coat SL-940 Conformal Coating System

IntelliJet Jetting System with ReadiSet Jet Cartridge

Dispensing

The IntelliJet® Jetting System with ReadiSet™ Jet Cartridge delivers cutting-edge reliability and micro dot dispensing for manufacturing advanced semiconductor and mobile electronics packages ReadiSet Jet Ca...

Nordson ASYMTEK

IntelliJet Jetting System with ReadiSet Jet Cartridge

DispenseMate Benchtop Dispensing System

Dispensing

Dispensing Power in a Compact Package The DispenseMate® Series brings new dispensing power to a compact package. In a benchtop format, many of today’s advanced automated dispensing features are available. Two models are offer...

Nordson ASYMTEK

DispenseMate Benchtop Dispensing System

DJ-9000 DispenseJet Jet Technology

Dispensing

Jetting is the best way to dispense many fluids quickly and accurately. The DJ-9000 has a high shot-generation rate, can be cleaned in a few minutes, and has fast changeover of wetted parts. Speed, Flexibility, Process Control, Experi...

Nordson ASYMTEK

DJ-9000 DispenseJet Jet Technology

DJ-2200 DispenseJet Non-Contact Flux Jet

Dispensing

Flux application using the DispenseJet® pump is a superior alternative to screen printing and ultrasonic spray. Jet dispensing eliminates the overspray and material waste associated with ultrasonic and spray application methods. Fl...

Nordson ASYMTEK

DJ-2200 DispenseJet Non-Contact Flux Jet

DV-03HPA High Pressure Valve with Suckback

Dispensing

The DV-03 is a air-actuated balanced spool valve for consistent dispensing of high viscosity fluids. For precision, you can control the amount of fluid dispensed by adjusting the fluid pressure, pulse time, and selecting the appropriat...

Nordson ASYMTEK

DV-03HPA High Pressure Valve with Suckback

DV-7000 Heli-Flow Pump

Dispensing

The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver epoxy. The dispense gap is mechanically controlled by the...

Nordson ASYMTEK

DV-7000 Heli-Flow Pump

Viscosity Control System

Coating Equipment

The Viscosity Control System maintains consistent temperature of conformal coating fluids. The system includes a heated recirculating fluid circuit to eliminate viscosity changes in temperature-responsive materials. Close-range temperature monitor...

Nordson ASYMTEK

Viscosity Control System

SV-100 Slider Valve Solder Paste Dispenser

Dispensing

Nordson ASYMTEK’s SV-100 Slider Valve dispenses paste-type fluids with metal additives better than traditional needle dispensing, using slider valve technology. This technology utilizes high-frequency, piezoelectric-drive actuati...

Nordson ASYMTEK

SV-100 Slider Valve Solder Paste Dispenser

Conexis CX-3040 Conformal Coating System

Coating Equipment

The Conexis™ system provides quality and value for all your automated conformal coating process needs Modular platform design allows options to be added as application needs change Up to three applicators can b...

Nordson ASYMTEK

Conexis CX-3040 Conformal Coating System

Spectrum II Premier S2-900P Fluid Dispensing System

Dispensing

Developed for leading-edge fluid dispensing applications, the Spectrum™ II Premier, equipped with the IntelliJet® Jetting System, provides the latest technology in closed-loop process controls, vision targeting, and jetting...

Nordson ASYMTEK

Spectrum II Premier S2-900P Fluid Dispensing System

DV-09 Needle Valve

Dispensing

The DV-09 valve is an air-operated, adjustable needle valve. It is designed to apply precise, repeatable deposits from a fraction of a microliter up to continuous stripes of low to high viscosity fluids. It is designed to app...

Nordson ASYMTEK

DV-09 Needle Valve

SC-400 PreciseCoat Jet

Coating Equipment

The SC-400 PreciseCoat® Conformal Coating Jet is ideal for applying coating materials to highly selective areas. This solution is designed for coating small substrates or substrates with high-component density, and when there are tight toleran...

Nordson ASYMTEK

SC-400 PreciseCoat Jet

NexJet NJ-8 Jetting System with ReadiSet Jet Cartridge

Dispensing

The NexJet® 8 Jetting System with ReadiSet™ Jet Cartridge offers increased jet frequency combined with advanced consumable management - it's as easy as ReadiSet and Jet. ReadiSet Jet Cartridge reduces ope...

Nordson ASYMTEK

NexJet NJ-8 Jetting System with ReadiSet Jet Cartridge

Quantum™ Q-6800 In-Line, Large-Format Fluid Dispensers

Dispensing

The next level of refinement, the Quantum™ Q-6800 Series is Nordson ASYMTEK’s latest high-performance, large-format dispensing platform. The Quantum platform has the same large dispense area as Axiom with a laser height sen...

Nordson ASYMTEK

Quantum™ Q-6800 In-Line, Large-Format Fluid Dispensers

Select Coat® Conformal Coating Applicators - SC-350 Select Spray and the SC-300 Multi-Mode

Coating Equipment

The Select Coat® Applicator Series – which includes the SC-350 Select Spray and the SC-300 Multi-Mode – is a highly-versatile conformal coating applicator that supports a wide range of fluid viscosities and is ideal for solvent or...

Nordson ASYMTEK

Select Coat® Conformal Coating Applicators - SC-350 Select Spray and the SC-300 Multi-Mode

SC-300 Swirl Coat Applicator

Coating Equipment

The SC-300 Swirl Coat® applicator offers three modes of operation - bead, monofilament and swirl. Ideal for conformal coating applications, the SC-300 handles a wide range of materials, varying in viscosity from 30 to 3500 mPa-sec (30 to 3500...

Nordson ASYMTEK

SC-300 Swirl Coat Applicator

Fids-on-the-Fly High-Speed Fiducial Capture

Dispensing

Nordson ASYMTEK’s Fids-on-the-Fly™ option is up to 5.5X faster than the traditional stop-and-capture mode for locating fiducials. Reducing time spent performing this essential, non-dispense routine can increase UPH as much...

Nordson ASYMTEK

Fids-on-the-Fly High-Speed Fiducial Capture

Spectrum II S2-900 Series Fluid Dispensers

Dispensing

Scalable Fluid Dispensers for Assembly of Semiconductors, MEMS, Storage Devices, and PCBs. High Speed, High Accuracy, Precision Dispensing System. The Spectrum II Series is the next evolution of the widely successful Spectr...

Nordson ASYMTEK

Spectrum II S2-900 Series Fluid Dispensers

DV-8000 Heli-Flow Pump

Dispensing

The DV-8000 series Heli-Flow® pumps are the newest generation of encoded auger pumps. The pump has a fixed-head design for luer needle applications. The DV-8000 pump's rigid head and fluid path can withstand high pressures generated by th...

Nordson ASYMTEK

DV-8000 Heli-Flow Pump

Nordson ASYMTEK

A leader in automated fluid dispensing, jetting and conformal coating. Products range from benchtop dispensers and stand-alone dispensing workstations to fully automated, in-line conveyorized systems.

Carlsbad, California, USA

Manufacturer of Assembly Equipment, Adhesives/Dispensing, Assembly, Component Packaging

EMI/RFI Shielding Laminates

Materials

To shield against emissions, there must be a barrier of an electrical conductive material. Shielding laminates provide an economical and effective solution to this problem. Most of our materials consist of a metal foil (usually, copper o...

ORION Industries

EMI/RFI Shielding Laminates

Laser Cutting Services

Other

Our Preco FlexPro CNC laser cutting system provides the speed of galvanometer processing with all the versatility of an XY motion system. Orion has the capability to cut detailed parts more precisely, and with shorter lead-times than conventional...

ORION Industries

Laser Cutting Services

Formed Plastics Products

Materials

Formed parts are used for electrical insulation, such as snap-in-place housings, protection of high voltage parts, or covering bus bars. Plastics Forming Methods: Heated line bending...

ORION Industries

Formed Plastics Products

Die Cutting, Stamping

Other

Orion has high-speed die cutting presses ranging from 1 to 60 tons. We also have stamping presses that range from 1 to 60 tons. Our other Die cutting capabilities include:     Production parts up to 60&qu...

ORION Industries

Die Cutting, Stamping

Heavy Gauge Electrical Insulation

Materials

ORION has emerged as a leader in the fabrication of heavy gauge electrical insulation products. We route many materials such as TW Formex®, Statex®, GE's Lexan®, and acrylics. Their typical thicknesses is between 0.060" and 0.25&...

ORION Industries

Heavy Gauge Electrical Insulation

CNC Routed Plastics, Electronic Insulation Products

Materials

Through the process of CNC routing, we are able to cut with precision electronic insulation products including thicker gauge materials. We also process composite materials such as G-10, FR4 and other materials that are not easily...

ORION Industries

CNC Routed Plastics, Electronic Insulation Products

Waterjet Cutting

Other

Waterjet allows for improved cutting tolerances, improved lead times and the ability to provide highly complex geometry. Using a stream of water with forces of 55,000 PSI yields fast production rates and tool free cutting. Our single hea...

ORION Industries

Waterjet Cutting

Filters and Screens

Materials

Orion provides flexible, polyurethane filter foam to remove dust and contaminating particles from the air, gases and liquids in a variety of applications. The open pore skeletal structure provides low air resistance ideal for use in computers, ele...

ORION Industries

Filters and Screens

Thermal Transfer, Thermal Interface Materials

Materials

We are well versed in the following thermal application materials:     Sil-Pad thermally conductive insulators     Gap-Pad thermally conductive gap filling material   ...

ORION Industries

Thermal Transfer, Thermal Interface Materials

Gaskets and Seals

Materials

Orion Industries Inc has over 35 years experience in the design and manufacture of high performance gaskets and seals. We fabricate parts from open cell sponge, closed cell sponge, and solid, dense gasketing materials. We also manufactur...

ORION Industries

Gaskets and Seals

ORION Industries

ORION provides innovative solutions to our customers' EMI/RFI Shielding, Insulating, Screening and Sealing needs in a broad spectrum of manufacturing environments.

Ayer, Massachusetts, USA

Design, Contract Manufacturer, Distributor, Service Provider, Subcontractor

1936/2043 Mark 5 SMT Reflow Oven

Reflow

The ultimate high volume production solutions with belt speeds up to 1.4 m/min to accommodate the fastest pick and place systems. Lead Free Certified! Maintenance Free! Lowest Nitrogen & Electrical Usa...

Heller Industries Inc.

1936/2043 Mark 5 SMT Reflow Oven

1707 Mark III Best value SMT Reflow Oven

Reflow

Best value SMT Reflow Oven in the market. Designed for Low Cost of Ownership. The 1700 models support high mix / medium volume throughput... at speeds up to 24 inches (60 centimeters) per minute, while conserving valuable factory floor...

Heller Industries Inc.

1707 Mark III Best value SMT Reflow Oven

1826 Mark 5 SMT Reflow Oven

Reflow

Providing consistent performance for high volume requirements while minimizing preventative maintenance and floorspace. Lead Free Certified! Maintenance Free! Lowest Nitrogen & Electrical Usage!...

Heller Industries Inc.

1826 Mark 5 SMT Reflow Oven

1910 MK5 Dual Lane / Dual Temperature SMT Reflow Oven

Reflow

Dual Chamber Module - Dual Chambers + Dual Blowers + Dual Heaters + Dual T/Cs. Bifurcated (Dual) chamber reflow oven allows 2 different thermal profiles to run simultaneously in the same reflow oven foot print Improv...

Heller Industries Inc.

1910 MK5 Dual Lane / Dual Temperature SMT Reflow Oven

860 Pressure Curing Oven (PCO)

Curing Equipment

A Pressure Cure Oven (PCO), or Autoclave, is used to minimize voiding and increase adhesion strength for bonding processes typically used in die attach and underfill applications. PCO pressurizes air into a rigid vessel and hea...

Heller Industries Inc.

860 Pressure Curing Oven (PCO)

1809 Mark III Advanced In-Line Vacuum Reflow Oven

Reflow

Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry! 100" Heated Length - for super throughput! 2 Internal Cooling Zones -...

Heller Industries Inc.

1809 Mark III Advanced In-Line Vacuum Reflow Oven

Mark7 SMT Reflow Oven for High-Throughput Applications

Reflow

The World's Best SMT Convection Reflow Oven for High-Throughput Applications The New MK7 platform revolutionizes the Reflow industry with several new and ground breaking designs! The MK7 incorporates all of the customer requests fo...

Heller Industries Inc.

Mark7 SMT Reflow Oven for High-Throughput Applications

1936 MKV - Formic Acid Horizontal Reflow Oven

Reflow

Flux Free Formic Reflow Reflow in Formic Acid Vapor Heller has designed and built an production ready horizontal reflow oven for formic acid vapor. This new oven has been designed to meet Semi S2/S8 safety standards...

Heller Industries Inc.

1936 MKV - Formic Acid Horizontal Reflow Oven

1913 Mark III SMT Reflow Oven

Reflow

The ultimate high volume production solutions with belt speeds up to 1.4 m/min to accommodate the fastest pick and place systems delivering the highest levels of repeatability with the lowest delta Ts. With a high-capacity, 26-inch wid...

Heller Industries Inc.

1913 Mark III SMT Reflow Oven

1809 Mark III Best value SMT Reflow Oven

Reflow

These workhorses provide consistent performance for high volume requirements while minimizing preventative maintenance and floorspace. The 1800 models support high mix / high volume throughput... at speeds up to 32 inches (80 centimete...

Heller Industries Inc.

1809 Mark III Best value SMT Reflow Oven

Heller Industries Inc.

Manufacturer of reflow soldering ovens for automated SMT PCB assembly, specializing in: lead free processing and nitrogen reflow = the best convection reflow ovens on the market.

Florham Park, New Jersey, USA

Manufacturer of Assembly Equipment, Soldering, OEM

YXLON Cougar EVO Series - Scalable Small Footprint X-Ray Inspection Systems

Inspection

The YXLON Cougar EVO series was designed to provide the "best-in-class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimize...

YXLON International

YXLON Cougar EVO Series - Scalable Small Footprint X-Ray Inspection Systems

YXLON Cheetah EVO Series - Scalabe X-ray Inspection Systems

Inspection

The YXLON Cheetah EVO series was designed to provide the "best-in-class" inspection solution for SMT, semiconductor, and laboratory assembly applications. With optimitzed software and hardware, these systems produce higher quality and mo...

YXLON International

YXLON Cheetah EVO Series - Scalabe X-ray Inspection Systems

YXLON FF20 CT High Resolution Industrial CT System for Small Parts Inspection

Inspection

The YXLON FF20 CT computed tomography system is designed to achieve the best 3D inspection results at very high resolution. Whether for R&D, defect analysis, process monitoring, or CT metrology, the FF20 CT is ideally suited for inspection of...

YXLON International

YXLON FF20 CT High Resolution Industrial CT System for Small Parts Inspection

YXLON CT Precision High-Resolution Cone-Beam Industrial CT System for Small/Medium Parts Inspection

Inspection

Discover the difference in accuracy - the YXLON CT Precision is a high-resolution cone-beam CT (computed tomography) inspection system for small to medium-sized parts. Precise industrial inspection & metrology applications&...

YXLON International

YXLON CT Precision High-Resolution Cone-Beam Industrial CT System for Small/Medium Parts Inspection

YXLON FF35 CT High Resolution Industrial CT System for Small/Medium Size Parts Inspection

Inspection

The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection results for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspecti...

YXLON International

YXLON FF35 CT High Resolution Industrial CT System for Small/Medium Size Parts Inspection

YXLON International

YXLON is the leading supplier of Industrial X-ray Inspection systems and Industrial Computed Tomography (CT) solutions for the non-destructive testing of materials. Markets served include Aerospace, Automotive, Electronics, etc.

Hudson, Ohio, USA

Inspection, Test Services, Manufacturer of Test Equipment

HY-460 Transfer Conveyor

Board Handling - Conveyors

HY-460 Transfer conveyor. Simple design at an affordable price. Custom lengths available. Can be fitted for multiple belts....

Alpha 1 Technologies, LLC

HY-460 Transfer Conveyor

Magazine Unloader

Board Handling - Conveyors

Simple and cost effective Magazine Unloader....

Alpha 1 Technologies, LLC

Magazine Unloader

Magazine Loader

Board Handling - Conveyors

Simple and cost effective Magazine Loader. ...

Alpha 1 Technologies, LLC

Magazine Loader

Compact Wave

Wave Soldering

Featuring a small foot print. The S1825M Compact Wave offers performance and value....

Alpha 1 Technologies, LLC

Compact Wave

Telescopic Gate Conveyor

Board Handling - Conveyors

Telescopic Gate Conveyor provides an innovative design and small footprint to save floor space....

Alpha 1 Technologies, LLC

Telescopic Gate Conveyor

ZHX-Y50 Odd Form Machine

Pick & Place

Our flexible placement machine can be configured to place a variety of odd form components. It's flexibility and cost effectiveness make it a clear choice to help eliminate hand placed compnents. Reducing rework and increasing profits....

Alpha 1 Technologies, LLC

ZHX-Y50 Odd Form Machine

Bare Board Loader

Board Handling - Conveyors

Simple and inexpensive. Compact design, simple to adjust, reliable. Why pay more for your board handling. ...

Alpha 1 Technologies, LLC

Bare Board Loader

ZHX-A30 Axial Inserter

Through-Hole

The ZHX-A30 Axial inserter is the most affordable, high speed system with reliable axial and jumper wire insertion at industry best cost per insertion on the market today. The ZHX-A30 is a Windows 7 based computer controlled high speed Axial componen...

Alpha 1 Technologies, LLC

ZHX-A30 Axial Inserter

680S Terminal and Tab Inserter

Through-Hole

The ZX-680S is a high speed auto-insertion machine for roll form metal terminals and tabs. With up to three different insertion heads, it is a combination of speed and efficiency for your terminal assembly needs. Can be equipped with optional force m...

Alpha 1 Technologies, LLC

680S Terminal and Tab Inserter

ST-516 AOI

Inspection

ST-516 and 808 Entry level low cost unit Stand Alone and Pass through models available User friendly interface with Windows 7 Operating System State of the Art software...

Alpha 1 Technologies, LLC

ST-516 AOI

AlphaCom Software

Software

Replace your old PPU software and DOS computer with a Windows based terminal program for your older Universal Equipment. Drag and Drop capability, program editor, network capable. Works on all Uinversal Instruments machines using UICS Executives....

Alpha 1 Technologies, LLC

AlphaCom Software

Laser Marking Systems

Inspection

For laser marking and engraving of PCB’s. Can engrave up to 16 characters and two dimensional code. We offer three fully automated marking systems: ZK-G-300 Green Laser ZK-UV-300 UV Laser ZK-co2-10 co2...

Alpha 1 Technologies, LLC

Laser Marking Systems

ZKS-600 and ZKS-1000N2 Reflow Ovens

Reflow

From the most feature packed entry level system to the ultimate in high volume and high capacity, the Series 600 and Series 1000 reflow ovens offer the widest choice available today. All reflow systems are Windows 7 based computer controlled for up t...

Alpha 1 Technologies, LLC

ZKS-600 and ZKS-1000N2 Reflow Ovens

ZKS-3A Solder Machine

Wave Soldering

Designed to be cost effective the 3A and 3B nitrogen wave are the answer to the high cost of wave solder machines. With a 400 kg solder pot in the 3A your startup costs for lead free are reduced by thousands. Simple design makes these machines easier...

Alpha 1 Technologies, LLC

ZKS-3A Solder Machine

Equipment Rebuilds

Other

Our equipment rebuilds start from the frame up. All wearing items are replaced and all necessary upgrades are performed. We provide field service and phone support with all of our rebuilds. We also provide training and technical assistance....

Alpha 1 Technologies, LLC

Equipment Rebuilds

ZHX-R20B Radial Inserter

Through-Hole

The ZHX-R20B second generation brings a cost effective solution to the market, providing reliable insertion to a wide variety of Radial type components. The ZHX-R20B is a Windows 7 based computer controlled high speed Radial inserter, with insertion...

Alpha 1 Technologies, LLC

ZHX-R20B Radial Inserter

Alpha 1 Technologies, LLC

Alpha 1 Technologies is the leading provider to the electronic printed circuit board assembly market. We strive to provide value driven solutions, whether new equipment or used, remanufactured assembly machines since 1999.

Binghamton, New York, USA

Manufacturer of Assembly Equipment, Pick and Place, Equipment Dealer / Broker, Service Provider, Software Manufacturer

PACE IR 1000 Infrared BGA & SMT Rework Station

Rework & Repair Equipment

Infrared BGA & SMT Rework at a Price that Can't Be Beat! The IR 1000 is a low-cost, remarkably flexible and effective rework system, capable of installing and removing passives, QFP's, SOIC's, PLCC's, MLF&#...

PACE Worldwide

PACE IR 1000 Infrared BGA & SMT Rework Station

MBT 350 Multi-Channel Solder, Desolder & Rework System

Rework & Repair Equipment

Soldering, Desoldering & Rework of Through-Hole/Surface Mount PCB's PACE's MBT 350 is a self contained, 3 channel rework station that offers high capacity, low temperature SMT/Thru-Hole sol...

PACE Worldwide

MBT 350 Multi-Channel Solder, Desolder & Rework System

PACE Arm-Evac 150 Digital Fume Extractor with SteadyFlex Arm

Fume Extraction

Protect your Workers from Hazardous Fumes at a Competitive Price PACE’s Arm-Evac 150 captures hazardous fumes locally and is suitable for benchtop soldering and electronic rework applications including han...

PACE Worldwide

PACE Arm-Evac 150 Digital Fume Extractor with SteadyFlex Arm

Cir-Kit Circuitry Repair Kit, Advanced Version (Non-ThermoBond)

Rework & Repair Equipment

A Simple, Low Cost Solution to Damaged Circuitry PACE Cir-Kit Circuitry Repair Kits are a simple, low cost solution to damaged, lifted or missing circuitry on pc boards, allowing fast repair and modification per IPC 7721. Non-ThermoBon...

PACE Worldwide

Cir-Kit Circuitry Repair Kit, Advanced Version (Non-ThermoBond)

ST 65 Air Operated Production Desoldering System with SX-100

Rework & Repair Equipment

There are no complicated controls to worry about with PACE's ST 65 ... just turn a dial to the temperature you need and you're ready to desolder! Low Cost Production Desoldering Station The...

PACE Worldwide

ST 65 Air Operated Production Desoldering System with SX-100

PACE TF 1800 BGA/SMD Rework System for Standard Boards (up to 12" x 12")

Rework & Repair Equipment

Patented Inductive-Convection Heating Technology Provides Ultimate Thermal Performance Conventional resistance coil heating technology has been successfully used in convective rework stations for decades to inst...

PACE Worldwide

PACE TF 1800 BGA/SMD Rework System for Standard Boards (up to 12

Cir-Kit Circuitry Repair Kit, Master Version, Non-ThermoBond

Rework & Repair Equipment

A Simple, Low Cost Solution to Damaged Circuitry PACE Cir-Kit Circuitry Repair Kits are a simple, low cost solution to damaged, lifted or missing circuitry on pc boards, allowing fast repair and modification per IPC 7721. Non-ThermoBon...

PACE Worldwide

Cir-Kit Circuitry Repair Kit, Master Version, Non-ThermoBond

PACE ST 75 Analog Desoldering Station

Rework & Repair Equipment

There are no complicated controls to worry about with PACE's ST 75 ... just turn a dial to the temperature you need and you're ready to desolder! Self-Contained, Expandable Desoldering Station The...

PACE Worldwide

PACE ST 75 Analog Desoldering Station

PH 100 Low Profile Infrared PCB Preheater

Rework & Repair Equipment

Rapid, Safe Soldering or Desoldering on High Mass, Heat-Sinking Assemblies Do you repair thick multilayer printed circuit boards that are connected to metal ground planes? Avionics modules that are designed to dissipate heat? Heat-sink...

PACE Worldwide

PH 100 Low Profile Infrared PCB Preheater

PACE SMR Multi-Function Pulse-Heat Rework Station

Cable & Wire Harness Equipment

Compact, Stand-Alone Pulse-Heat Pulse Heat System The SMR features a Pulse Heat power output which provides controlled temperature ramp-up to reflow temperatures, reducing thermal shock risk and unwanted heating of adjacent solder...

PACE Worldwide

PACE SMR Multi-Function Pulse-Heat Rework Station

PACE ST 325 Digital, Programmable Hot Air Reflow System

Rework & Repair Equipment

Convective SMT Rework System is Fully Programmable The ST 325 is a digital, self-contained system that is fully programmable and can be used to remove or install surface mount components when individual or multiple operations are to be...

PACE Worldwide

PACE ST 325 Digital, Programmable Hot Air Reflow System

PACE ST 115 Digital Desoldering Station with SX-100 Sodr-X-Tractor

Rework & Repair Equipment

ST 115 Digital Desoldering Station with SX-100 Sodr-X-Tractor          ...

PACE Worldwide

PACE ST 115 Digital Desoldering Station with SX-100 Sodr-X-Tractor

PACE ST 925 SMT Rework System

Rework & Repair Equipment

Low-Cost Convective and Infrared System for SMT Rework The ST 925 combines three popular PACE products together into one convenient, low-cost SMT Rework System. The system is comprised of the ST 325 Programmable Convective/Hot...

PACE Worldwide

PACE ST 925 SMT Rework System

Cir-Kit Circuitry Repair Kit, Basic Version (Non-ThermoBond)

Rework & Repair Equipment

A Simple, Low Cost Solution to Damaged Circuitry PACE Cir-Kit Circuitry Repair Kits are a simple, low cost solution to damaged, lifted or missing circuitry on pc boards, allowing fast repair and modification per IPC 7721. Non-ThermoBon...

PACE Worldwide

Cir-Kit Circuitry Repair Kit, Basic Version (Non-ThermoBond)

PACE PRC 2000 SMT/Through-Hole System for Miniature/Microminiature Repair

Rework & Repair Equipment

Legendary Military Workhorse with Proven Reliability, Longevity & Durability Utilized at all major US and International Military depots, you'll find the PRC 2000 at shipboard repair shops, mobile maintenance vans and thousands...

PACE Worldwide

PACE PRC 2000 SMT/Through-Hole System for Miniature/Microminiature Repair

ADS200 High Powered AccuDrive Production Soldering Station

Soldering - Other

ADS200 AccuDrive® Production Soldering Station with TD-200 Tip-Heater Cartridge Iron New High-Powered Soldering Station at a Competitive Price...

PACE Worldwide

ADS200 High Powered AccuDrive Production Soldering Station

MBT 301 Soldering & Desoldering Station with TD-100 & SX-100

Soldering - Other

Soldering, Desoldering, Rework & Repair of Through-Hole/Surface Mount PCB's PACE's MBT 301 is a self contained, 2 channel rework station that offers high capacity, low temperature SMT/Thru-Hole soldering, d...

PACE Worldwide

MBT 301 Soldering & Desoldering Station with TD-100 & SX-100

PACE TF 2800 BGA/SMD Rework System for Extra Large Boards

Rework & Repair Equipment

Patented Inductive-Convection Heating Technology Provides Ultimate Thermal Performance Conventional resistance coil heating technology has been successfully used in convective rework stations for decades to install...

PACE Worldwide

PACE TF 2800 BGA/SMD Rework System for Extra Large Boards

PACE IR 3000 Infrared BGA/SMT Rework System

Rework & Repair Equipment

Production BGA Installation & Rework WITHOUT the Expensive Nozzles! The IR 3000 is the most advanced BGA rework system available on the market today. It can easily install and remove BGA, QFN, µ...

PACE Worldwide

PACE IR 3000 Infrared BGA/SMT Rework System

PACE Worldwide

A recognized developer of solutions for the assembly & repair of highly advanced electronics. PACE provides products/training for the soldering, rework & repair of pcb's, specializing in BGA rework, desoldering & fume extraction.

Vass, North Carolina, USA

Manufacturer of Assembly Equipment, Repair/Rework, Soldering, IPC Standards Certification Center, Training Provider

Wave solder outfeed conveyor for THT assembly line

Board Handling - Conveyors

Our Advantages: ** Professional manufacturer for 10 years ** Price neither the lowest nor the highest,but quality is of the best ** Belt material is ESD antistatic  ** Belt can be treated with punching holes f...

ShenZhen J-wide Electronics Equipment Co.,Ltd

Wave solder outfeed conveyor for THT assembly line

Lear free 8 zone SMT reflow oven for Turnkey service manufacturer

Reflow

Our advantages: ** Professional manufacturer ** Windows XP System with Chinese and English Interface ** Hot air circular heating method ** Single lane and dual lane available...

ShenZhen J-wide Electronics Equipment Co.,Ltd

Lear free 8 zone SMT reflow oven for Turnkey service manufacturer

JP-100S Digital Large PCB Ultrasonic Cleaning Machine

Cleaning Equipment

Product Features: stainless steel tank has resistance to wear and long work life. tank capacity:22L(5.8gallon), with digital timer & heater control stainless steel basket use just tab water, o...

ShenZhen J-wide Electronics Equipment Co.,Ltd

JP-100S Digital Large PCB Ultrasonic Cleaning Machine

JW-8000 SMD Tape and Reel System

Tape and Reel Equipment

Product Specification: Brand Jwide Model JW-8000 SMD Taping machine...

ShenZhen J-wide Electronics Equipment Co.,Ltd

JW-8000 SMD Tape and Reel System

High accuracy SMD Components counter

Component Counters / SMD Counters

Technical Specification:   Brand Jwide Model JW-838 Power AC220/110,50HZ,25W...

ShenZhen J-wide Electronics Equipment Co.,Ltd

High accuracy SMD Components counter

8 zones PCB Soldering oven for SMT assembly line

Reflow

Our advantages: ** Professional manufacturer for 10 years ** Competitive prices with good quality ** Different zones available from 5 zone to 10 zones ** Computer optional,guide optional,dual lane optional *...

ShenZhen J-wide Electronics Equipment Co.,Ltd

8 zones PCB Soldering oven for SMT assembly line

JW-450 Vaccum PCB Unloader

Board Handling - Conveyors

Technical Specification (JW-450) Model JW-450 Out structure...

ShenZhen J-wide Electronics Equipment Co.,Ltd

JW-450 Vaccum PCB Unloader

6 zone SMT Welding reflow oven with computer for EMS factory

Reflow

Our advantages: ** Professional manufacturer ** Windows XP System with Chinese and English Interface ** Hot air circular heating method ** Single lane and dual lane available...

ShenZhen J-wide Electronics Equipment Co.,Ltd

6 zone SMT Welding reflow oven with computer for EMS factory

Small 5 zone SMD reflow oven machine for LED assembly line

Reflow

Our advantages: ** Professional manufacturer ** Windows XP System with Chinese and English Interface ** Hot air circular heating method ** Single lane and dual lane available...

ShenZhen J-wide Electronics Equipment Co.,Ltd

Small 5 zone SMD reflow oven machine for LED assembly line

PCB Bare board loader

Board Handling - Conveyors

Product Specification:   Model JW-450 Out structure aluminum frame...

ShenZhen J-wide Electronics Equipment Co.,Ltd

PCB Bare board loader

Economic wave solder machine

Wave Soldering

Product Specification: Machine features model JWRS-350 Dimension 4200*1200*1650MM Pow...

ShenZhen J-wide Electronics Equipment Co.,Ltd

Economic wave solder machine

Automatic SMT Solder paste softener for EMS factory

Solder Paste Mixers

Our Advantage: ** Over 10 years production experience ** Bulk production for immediate shipment ** Price is neither the highest nor the lowest,but quality is ensurable ** CE approved machines ** Revolution a...

ShenZhen J-wide Electronics Equipment Co.,Ltd

Automatic SMT Solder paste softener for EMS factory

V CUT PCB depanalizer for PCB turnkey service

Depaneling

Brand Jwide  Model JW-828 PCB  Cutter Outer  dimension 600*360*410mm Cut...

ShenZhen J-wide Electronics Equipment Co.,Ltd

V CUT PCB depanalizer for PCB turnkey service

Automatic AOI machine for SMT assembly

Test Equipment

Product Introduction: Offline AOI is used after Stencil printer,before/after reflow oven,before/after wave solder; It works automatically and precisely to save much labor cost. Main Features: &Oslas...

ShenZhen J-wide Electronics Equipment Co.,Ltd

Automatic AOI machine for SMT assembly

PCB storage cart trolley for turnkey service solution

Assembly Services

Technical Specification:   Frame material Aluminum  Basket material ESD plastic Dimension...

ShenZhen J-wide Electronics Equipment Co.,Ltd

PCB storage cart trolley for turnkey service solution

Samsung SMT Feeder trolley

Pick & Place

Professional manufacturer for all kinds of SMT feeders,like:Yamaha,Samsung,Juki,ASM,Philips,Fuji and so o Feeder type:Samsung SM Machine size:930*600*1170mm Weight:31kg Feeder quantity:56 pcs/ layer,totally 112 pcs f...

ShenZhen J-wide Electronics Equipment Co.,Ltd

Samsung SMT Feeder trolley

1.2M LED PCB Stencil printing machine

Printing

Our Advantage: 1.Professional manufacturer for more than 10 years. 2.CE approved products 3.Apply for solder paste or red glue printing 4.Honeycomb magnetic platform and pin makes it much fit for s...

ShenZhen J-wide Electronics Equipment Co.,Ltd

1.2M LED PCB Stencil printing machine

Semi automatic SMT PCB screen printer for EMS factory

Printing

Our advantages: ** Professional manufacturer ** CE Compliant product ** Honeycomb and magnetic design to fix all position easily ** T8 Aluminum platform,10 times more durable ** Or...

ShenZhen J-wide Electronics Equipment Co.,Ltd

Semi automatic SMT PCB screen printer for EMS factory

Accurate SMD Parts counter

Component Counters / SMD Counters

Technical Specification:   Brand Jwide Model JW-838 Power AC220/110,50HZ,25W...

ShenZhen J-wide Electronics Equipment Co.,Ltd

Accurate SMD Parts counter

PCB unloaders with single or tripple magzines

Board Handling - Conveyors

Brand Jwide Model JW-811 unloader JW-811-L JW-811-XL Outer dimension 2000*...

ShenZhen J-wide Electronics Equipment Co.,Ltd

PCB unloaders with single or tripple magzines

ShenZhen J-wide Electronics Equipment Co.,Ltd

We provide original spare parts for pick and place machines, also we produce SMT peripheral equipment: semi auto printers, solder mixers, PCB loaders, PCB unloaders, PCB separators, SMD chip counters, SMD taping machines and so on

ShenZhen, China

Manufacturer of Assembly Equipment, Equipment Dealer / Broker

SP210avi 23" Inline SMT Stencil Printer

Printing

While bringing a fresh new look to the SP210avi the printer still retains it's reputation as the smallest printer in the market with the highest level of capability and quality. Developed as...

Speedprint Technology

SP210avi 23

SP700avi Inline SMT Stencil Printer

Printing

The SP700avi stencil printer combines Speedprints commitment to high performance and reliability with outstanding value. The system has been designed to cope with the rigors of high volume SMT production whilst incorporating the flexibility needed...

Speedprint Technology

SP700avi Inline SMT Stencil Printer

SP710avi Inline SMT Screen Printer with Advanced Dispense Unit

Printing

The SP700avi smt screen printer equipment becomes the SP710avi when it is equipped with the Automatic Dispense unit (ADu).The Dual Syringe, Automatic Dispense unit (ADu) allows users to eliminate additional capital outlay by integ...

Speedprint Technology

SP710avi Inline SMT Screen Printer with Advanced Dispense Unit

SP1550 Long Board Screen Printer

Printing

New printer aligns screen printing with long boards from sectors such as LED Lighting. With long PCBs increasingly common, we have introduced a new screen print platform that extends Speedprint’s board size capability. The SP1550...

Speedprint Technology

SP1550 Long Board Screen Printer

SP1220 Mid-Sized Long Boards Screen Printer

Printing

New screen printer handles mid-sized Long Boards. The new SP1220 is optimised for mid-sized long boards up to 1220mm (48 inches) in length, addressing the majority of boards in the market in a smaller footprint than its sister platform...

Speedprint Technology

SP1220 Mid-Sized Long Boards Screen Printer

Speedprint Technology

Manufacturer of full function in-line automatic Stencil Printers.

Dorset, United Kingdom

Manufacturer of Assembly Equipment, Screen Printing

MALCOM Reflow Profilers

Reflow

Malcom Reflow Profilers have been indispensable to the temperature management of reflow ovens. Smaller and lighter than previous models, new functions are also incorporated into the newest version. Models: RCP-600 Reflo...

Seika Machinery, Inc.

MALCOM Reflow Profilers

Unitech PCB Cleaners

Cleaning Equipment

UC–250 Series, from Citizen’s established precision and machining technology, is specially designed for SMT line use. Able to clean top surface of PCB even chip components attached on the bottom side. Anti...

Seika Machinery, Inc.

Unitech PCB Cleaners

Solder Paste Recycling System

Soldering - Other

Seika Machinery has introduced a line of unique, cutting-edge new Green Technology products to address customer requirements for recycling, energy conservation, renewable resources and cost-cutting systems.   We will continue to seek out ne...

Seika Machinery, Inc.

Solder Paste Recycling System

Nihon Superior Solder

Solder Materials

The trace addition of Ni means fewer shorts and no shrinkage defects Ni-stabilized intermetallic layer inhibits copper erosion Reliable in harsh environments High ductility ensure long service life of joint...

Seika Machinery, Inc.

Nihon Superior Solder

YJ Link PCB Handling Systems

Board Handling - Conveyors

SMEMA interface Slim & round design Double base plate structure Buzzer alarm function Decreased PCB stress by shockabsorber Safe tuning system by dual cylinder Cover des...

Seika Machinery, Inc.

YJ Link PCB Handling Systems

MALCOM SPS Solder Paste Mixers

Solder Paste Mixers

Unlike hand mixing, the Malcom SPS Solder Paste Mixer is a non contaminating mixer which utilizes pseudo planetary motion to stir the solder paste. The SPS-1 provides uniform paste consistency regardless of operator skill. The paste temperature ri...

Seika Machinery, Inc.

MALCOM SPS Solder Paste Mixers

MALCOM TD-4M Manual Paste Print Inspection System

Inspection

For measuring height, area, volume, and misprinting of printed solder paste. FEATURES & BENEFITS: Easy to use interface makes PCB spot checks quick and simple. Color CCD camera shows clear image....

Seika Machinery, Inc.

MALCOM TD-4M Manual Paste Print Inspection System

Hioki 1220 In-Circuit Tester

Test Equipment

Functions combined in one bench-top cabinet In-circuit testing functions are assembled into a system or line to save space in the testing facility, enabling easy support of cell production. Macro test...

Seika Machinery, Inc.

Hioki 1220 In-Circuit Tester

Malcom Reflow Simulators

Reflow

See what you've never been able to see before, with one of Malcom's Reflow Simulators. Each of our units can recreate your reflow temperature curves. And with the viewing windows, you now have the ability to monitor what is happening to yo...

Seika Machinery, Inc.

Malcom Reflow Simulators

MALCOM Wetting Balance and Solderability Testers

Test Equipment

MALCOM SP-2 WETTING TESTER The Malcom SP-2 Wetting Tester simulates either reflow conditions (for solder paste), or wave soldering conditions (for molten solder) for the measurement of wetting force for your components....

Seika Machinery, Inc.

MALCOM Wetting Balance and Solderability Testers

Andes Multipoint Selective Soldering System

Selective Soldering

Uses customized and dedicated fixtures/nozzles which eliminates the use of masking tape Lead-free compatible The number of components on the PCB will not affect the tact time Able to control under the tempe...

Seika Machinery, Inc.

Andes Multipoint Selective Soldering System

AI-TEC PCB Conformal Coating and Curing System

Coating Equipment

The system has a patented conformal coating dispenser designed to control both the temperature and viscosity with a circulated pump unit. It controls coating width with ultra-precision. The compact, space-saving design features a combine...

Seika Machinery, Inc.

AI-TEC PCB Conformal Coating and Curing System

MALCOM PCU-200 Digital Viscometers

Solder Materials

Patented spiral-pump sensor provides quick, easy, repeatable measurements. Elimination of misprints due to incorrect paste conditions. Continuous measurement of newtonian and non-newtonian fluids with constant shear r...

Seika Machinery, Inc.

MALCOM PCU-200 Digital Viscometers

Seitec Selective Soldering System with Built-in Spray Fluxer

Selective Soldering

Designed For Use with Multilayer and High Density PCBs The STS-2533SJ is a new Selective soldering system equpped with a Servo Jet Spray Fluxer system. The Servo Jet system allows for precise flux application on small targets a...

Seika Machinery, Inc.

Seitec Selective Soldering System with Built-in Spray Fluxer

Sawa Eco-Nozzle Mounter Nozzle Cleaner

Cleaning Equipment

The Mounter Nozzle Cleaner cleans 20 nozzles at a time. With the system, ultrasonically-vibrated water thoroughly passes through every nozzle opening. Double-cleaning power is generated with ultrasonic-energy cleaning and simultaneous vacuum sucti...

Seika Machinery, Inc.

Sawa Eco-Nozzle Mounter Nozzle Cleaner

MALCOM TD-6A Automatic Paste Print Inspection System

Inspection

For measuring height, area, volume, and misprinting of printed solder paste. FEATURES & BENEFITS: Active Slit-Laser scans the board and displays a full 3D image. User programable inspection points for eac...

Seika Machinery, Inc.

MALCOM TD-6A Automatic Paste Print Inspection System

Sawa Ecobrid LOW-VOC Fully-Automatic Stencil Cleaner

Cleaning Equipment

High-Performance Cleaning Features: Cleaning with Low-VOC Solvents Reduction of CO2 Emissions by 10% over conventional cleaner models Save $$ in Running Costs Fast Cleaning and Drying Time...

Seika Machinery, Inc.

Sawa Ecobrid LOW-VOC Fully-Automatic Stencil Cleaner

MALCOM TK-1 Tackiness Tester

Solder Materials

The Malcom TK-1 Tackiness Tester is widely used to help our customers predict solder paste tack time, limiting the potential for dropped components, using either the IPC, Depth Method, or JIS Standard Test. These three convenient testing methods f...

Seika Machinery, Inc.

MALCOM TK-1 Tackiness Tester

Malcom FCP-50 Wave Solder Profiler

Wave Soldering

The Malcom FCP-50 Solder Profiler provides excellent temperature profile and dip time analysis. The FCP-50 is for single wave and dual wave soldering systems. FEATURES & BENEFITS: Unit includes software (Computer...

Seika Machinery, Inc.

Malcom FCP-50 Wave Solder Profiler

Tamura iLead-Free Reflow Ovens

Reflow

New Heat Insulation Design with Energy Saving Effect N2 consumption largely reduced Air conditioning load also reduced...

Seika Machinery, Inc.

Tamura iLead-Free Reflow Ovens

Seika Machinery, Inc.

Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products

Torrance, California, USA

Cleaning, Drilling/Routing, Inspection, Distributor, Selective Soldering

Mark 5 回流焊炉系列

Reflow

世界最佳回流焊炉 节能省氮 標配Cpk软件 加强型加热模组 快速的冷却能力 Profile一步到位...

Heller 公司

Mark 5 回流焊炉系列

Heller 公司

全球回流焊市场领导者

Min Hang District, Shanghai, China

Manufacturer of Assembly Equipment

AQUANOX® XJN-PLUS - Aqueous Spray Cleaner for Electronic Assemblies

Cleaning Agents

AQUANOX® XJN-PLUS is a KYZEN legacy product. The aqueous cleaning solution is effective on pastes, fluxes, and assembly residues. AQUANOX® XJN-PLUS is a multi-metal safe product with no sump-side adds and leaves solder joints brilliant....

KYZEN Corporation

AQUANOX® XJN-PLUS - Aqueous Spray Cleaner for Electronic Assemblies

LONOX® L5314 - Aqueous Cleaner for Stencils, Pallets, and Maintenance Cleaning

Cleaning Agents

LONOX® L5314 is extremely effective on a wide range of soils including raw solder paste and fluxes built up on wave solder pallets yet mild enough on pallet hardware for repeated wash cycles. LONOX® L5314 can be used at ambient t...

KYZEN Corporation

LONOX® L5314 - Aqueous Cleaner for Stencils, Pallets, and Maintenance Cleaning

IONOX® I3302 Broad Spectrum Electronics Cleaner

Cleaning Agents

Broad Spectrum Electronics Cleaning Solvent IONOX® I3302 is a semi-aqueous solvent blend designed to remove difficult flux and paste residues including lead-free, rosin, no-clean, and tacky flux, as well as other c...

KYZEN Corporation

IONOX® I3302 Broad Spectrum Electronics Cleaner

AQUANOX® A4625B - Aqueous Batch Cleaning Solution

Cleaning Agents

AQUANOX® A4625B is an innovative aqueous chemistry designed for optimum effectiveness in batch washers. This easy to use product will remove all types of electronic flux residues including the latest lead free. AQUANOX® A4625B...

KYZEN Corporation

AQUANOX® A4625B - Aqueous Batch Cleaning Solution

AQUANOX® A4520 - Aqueous All Temperature Electronics Cleaner

Cleaning Agents

Aqueous Cleaner for Flip Chips and Advanced Packaging AQUANOX® A4520 is an aqueous blend designed to remove re-flowed pastes, tacky, no clean and a majority of lead free residues while exceeding industry standards for worker and en...

KYZEN Corporation

AQUANOX® A4520 - Aqueous All Temperature Electronics Cleaner

AQUANOX® A8820D - Ready to Use Advanced Stencil Cleaner

Cleaning Agents

AQUANOX® A8820D is a pour and go, engineered micro-cell cleaning fluid designed to remove wet solder paste and uncured adhesive from stencils used with the surface mount printing process. No Mixing or Monitoring Fo...

KYZEN Corporation

AQUANOX® A8820D - Ready to Use Advanced Stencil Cleaner

AQUANOX® A4625 - Aqueous In-Line Cleaning Solution

Cleaning Agents

AQUANOX® A4625 is a versatile aqueous cleaning chemistry designed to clean the latest lead-free residues while providing brilliant mirrored solder finishes. Easy to use, AQUANOX® A4625 is environmentall...

KYZEN Corporation

AQUANOX® A4625 - Aqueous In-Line Cleaning Solution

AQUANOX® A4639 - Electronic Assembly Aqueous Solution

Cleaning Agents

AQUANOX® A4639 is an engineered aqueous cleaning fluid that is effective on a wide range of soils at low operating temperatures and concentrations. AQUANOX® A4639 provides exceptional cleaning results and protection of metallic surfaces wi...

KYZEN Corporation

AQUANOX® A4639 - Electronic Assembly Aqueous Solution

AQUANOX® A8830 - Low VOC Aqueous Stencil Cleaning Agent

Cleaning Agents

AQUANOX® A8830 is a mild formulation that does not damage stencils and is highly effective at removing all types of solder pastes (water soluble, rosin, and no-clean) from fine pitch apertures. AQUANOX A8830 is a low odor cleaner that can be u...

KYZEN Corporation

AQUANOX® A8830 - Low VOC Aqueous Stencil Cleaning Agent

IONOX® BC - Semi-Aqueous Solvent Electronics Cleaner

Cleaning Agents

IONOX® BC is a general purpose semi-aqueous solvent blend specially designed for effective removal of flux residues and dried uncured adhesives. IONOX® BC is approved for manual stencil cleaning as well as underscreen wipe applications....

KYZEN Corporation

IONOX® BC - Semi-Aqueous Solvent Electronics Cleaner

AQUANOX® A4708 - pH Neutral Electronic Assembly Cleaning Chemistry

Cleaning Agents

AQUANOX® A4708 is a neutral range pH chemistry designed to rapidly clean under densely populated low-gap PWB assemblies. AQUANOX® A4708 is effective on all flux types including no-clean and water soluble residues. AQUANOX®...

KYZEN Corporation

AQUANOX® A4708 - pH Neutral Electronic Assembly Cleaning Chemistry

AQUANOX® A4651US - Low pH Ultrasonic Immersion Cleaner

Cleaning Agents

AQUANOX® A4651US is a low pH aqueous cleaning solution designed exclusively for use in ultrasonic immersion cleaning systems. AQUANOX® A4651US will provide brilliant solder joints with no sump side additives and cleans exceptio...

KYZEN Corporation

AQUANOX® A4651US - Low pH Ultrasonic Immersion Cleaner

AQUANOX® A8820 - Advanced Aqueous Stencil Cleaner

Cleaning Agents

AQUANOX® A8820 is an engineered Micro Cell Technology (MCT™) cleaning fluid designed to remove wet solder paste and uncured adhesive from stencils used with the surface mount printing process. For Spray-in-Air and Sel...

KYZEN Corporation

AQUANOX® A8820 - Advanced Aqueous Stencil Cleaner

KYZEN® E5615 - Fast Drying Stencil Cleaner

Cleaning Agents

KYZEN® E5615 is an aqueous based cleaner designed to be the fastest drying chemistry in the industry. E5615 is shipped ready to use and successfully removes unreflowed solder paste from stencils and related equipment....

KYZEN Corporation

KYZEN® E5615 - Fast Drying Stencil Cleaner

CYBERSOLV® C8622 - Safe / Effective IPA Alternative Solvent

Cleaning Agents

CYBERSOLV® C8622 is a full strength solvent blend specifically designed as an IPA alternative in stencil wiping and manual bench top cleaning applications. Easy to use, C8622 is applied in applications where IPA is typically used....

KYZEN Corporation

CYBERSOLV® C8622 - Safe / Effective IPA Alternative Solvent

KYZEN® Defoamer - Aqueous Based De-foaming Agent for Electronics Assembly Cleaning

Cleaning Agents

KYZEN® Defoamer is an effective de-foaming agent to eliminate foam build-up in aqueous in-line cleaners. KYZEN Defoamer has been found to be especially effective for use in captured wash tanks where water soluble flux residues cause excessive...

KYZEN Corporation

KYZEN® Defoamer - Aqueous Based De-foaming Agent for Electronics Assembly Cleaning

CYBERSOLV® C8882 - Understencil Wipe / Stencil Cleaning

Cleaning Agents

CYBERSOLV® C8882 is a fast-acting stencil cleaning solvent designed for the understencil wipe process. CYBERSOLV® C8882 instantly dissolves all flux types within the solder paste, including water soluble, rosin and low residu...

KYZEN Corporation

CYBERSOLV® C8882 - Understencil Wipe / Stencil Cleaning

MICRONOX® MX2302 Wafer-level Cleaning Solution

Cleaning Agents

MICRONOX® MX2302 is an engineered semiaqueous solvent blend designed to remove difficult flux and paste residues including lead-free, rosin, no-clean, and tacky flux from wafer bumps found in flip chip, chip scale and μBGA...

KYZEN Corporation

MICRONOX® MX2302 Wafer-level Cleaning Solution

CYBERSOLV® C8508 - Spray Cleaner for Reflow Ovens

Cleaning Agents

CYBERSOLV® C8508 is the latest generation spray cleaner for reflow ovens and general equipment maintenance cleaning. CYBERSOLV® C8508 has been tested on the toughest baked on flux residues with great success and has proven effective on the...

KYZEN Corporation

CYBERSOLV® C8508 - Spray Cleaner for Reflow Ovens

CYBERSOLV® C8544 - Maintenance Cleaner and Coating Stripper

Cleaning Agents

Full-Strength Maintenance Cleaner/Stripper. CYBERSOLV® C8544 is a solvent cleaner and stripper designed to be used in immersion and manual cleaning applications. Easy to use, C8544 is applied as received and heated in a well-ventil...

KYZEN Corporation

CYBERSOLV® C8544 - Maintenance Cleaner and Coating Stripper

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Cleaning

Box Build & Test

Assembly Services

Circuit card assemblies (CCAs) and box builds have been STI’s expertise for over 12 years. Our commitment to quality and customer satisfaction is what separates us from our competition. STI is proud to be ISO 9001:2008 certified which means...

STI Electronics

Box Build & Test

Schematic Forward Design

Design Services

STI offers proven experience and expertise to provide our customers with the highest quality design services. STI specializes in complex and high-reliability projects working as an extended arm to our customers’ engineering team. With t...

STI Electronics

Schematic Forward Design

Prototype Development Services

Prototyping

STI strives to be a complete partner from schematic forward design through first article validation. A key step in this cycle is prototype development process. Prototypes are a requirement in the design validation step and often c...

STI Electronics

Prototype Development Services

Feasibility Assessment

Design Services

Engineers at STI are available to perform a design feasibility assessment as you begin developing the standards your next product or revision upgrade. Our design engineers will provide objective feedback on key design issues such as functional req...

STI Electronics

Feasibility Assessment

System Level Integration

Design Services

Assembly documentation is necessary to capture all of the materials, processes, and final requirements of board-level and system-level assemblies. These drawings convey material sets, approved assembly processes, final inspection requirements, and...

STI Electronics

System Level Integration

Design for Manufacturing (DFM) Services

Design Services

STI’s engineering team places emphasis on defect prevention and non-value added process step elimination by analyzing the design data package for common errors relating to the BOM selection, PCB design, and manufacturing materials/processes...

STI Electronics

Design for Manufacturing (DFM) Services

Electrical Test Services

Test Services

STI offers a variety of electrical test services from component-level testing/characterization to system-level testing.  Electrical testing is offered to validate values in accordance with component manufacturer's performance specifi...

STI Electronics

Electrical Test Services

Size, Weight & Power Reduction (SWaP) Services

Design Services

Military and aerospace electronics providers continue to push the technological envelope to design and manufacture leading edge electronics for today's users. Current design problems are not driven by circuit design capabilities but by an inab...

STI Electronics

Size, Weight & Power Reduction (SWaP) Services

Circuit Design Services

Design Services

STI’s involvement in research and development programs, both in component packaging technologies and electronics assembly manufacturing, has brought about the acquisition of the top people in this field and the installation of the latest and...

STI Electronics

Circuit Design Services

Electronics Assembly and Solder Training Courses

Education/Training

STI Electronics, Inc. (STI) offers a wide variety of electronic assembly and solder training courses ranging from Commercial to High Reliability Requirements including NASA for through-hole, surface mount, cable/harness assembly as well as staking...

STI Electronics

Electronics Assembly and Solder Training Courses

Thermography Test Services

Test Services

Thermal infrared (IR) imaging analysis aids dramatically in characterizing an electronics assembly’s thermal dissipation and identifying peak junction temperatures of the populated component set. The results from IR Thermography testing can...

STI Electronics

Thermography Test Services

Material Failure Analysis

Inspection

The experience and knowledge of STI’s Analytical Laboratory personnel enables interpretation of test results and reporting that lets our customers make the right choices for corrective actions.  Services include Qualification testing,...

STI Electronics

Material Failure Analysis

Microelectronics Packaging

Assembly Services

The Microelectronics Lab was established to meet the rising need for advanced systems development and packaging to address the emerging challenges and issues facing today’s electronics assemblies. Advanced design and modelin...

STI Electronics

Microelectronics Packaging

Strain Gage Test Services

Test Services

Strain gage testing is utilized to evaluate materials and processes effect on PWB and component-level stress due to static and dynamic loads. These stresses can originate from sources such as thermal, mechanical, and/or a combination of the two.&n...

STI Electronics

Strain Gage Test Services

Environmental Test Chamber Services

Test Services

All electronic hardware is susceptible to the damaging effects of moisture, temperature, and contaminants. STI understands the criticality of reliability testing and test-to-failure. Improper selection of assembly materials and manufacturing...

STI Electronics

Environmental Test Chamber Services

Contract PCB Assembly

Assembly Services

STI is equipped with a state of the art 26,000 sq ft manufacturing area with the latest in high speed placement, inspection, and test equipment in addition to work cells to assemble complex box builds. Our personnel are uniquely q...

STI Electronics

Contract PCB Assembly

Electronic Assembly and Solder Training Materials

Education/Training

STI Electronics, Inc. is the premier distributor of Electronic Assembly and Solder Kits including BGA, Fine Pitch, Through-Hole and Mixed Technology to mention a few. STI’s staff designs the boards and kits based on current...

STI Electronics

Electronic Assembly and Solder Training Materials

PCB Layout & Design

Design Services

Even the best schematic circuit design can be undermined by poor component layout and routing. STI’s experienced design engineers address the critical design factors that affect manufacturing and assembly, product performance, and long-term...

STI Electronics

PCB Layout & Design

Rework and Repair Services

Rework & Repair Services

STI has qualified technicians trained in IPC 7711/7721, as well as in custom design solutions, to address your electronic rework and repair needs. STI’s services encompass both mainstream assembly technologies (surface mount and through-hole...

STI Electronics

Rework and Repair Services

STI Electronics

Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry.

Madison, Alabama, USA

Assembly, Design, IPC Standards Certification Center, Contract Manufacturer, Training Provider

ASC-620 Plate Separator

Depaneling

ASC-620 Plate Separator...

Qinyi Electronics Co.,Ltd

ASC-620 Plate Separator

Label Feeder

Pick & Place

Label Feeder   Label Feeder means feeder.First label paper installed in feeder, The feeder provides label for chip mounter. Electronic operation,Seamless communication with pick and place machine ,Real-time control,communi...

Qinyi Electronics Co.,Ltd

Label Feeder

Panasonic NM-EJW2A Calibrator for CM feeder

Pick & Place

NM-EJW2A Calibrator for CM feeder...

Qinyi Electronics Co.,Ltd

Panasonic NM-EJW2A Calibrator for CM feeder

YS-IH882 with Empty chip detection

Component Counters / SMD Counters

Broader scope, the latest ultra-small SMD components (01005) count, the series is as follows:  These are the components pac...

Qinyi Electronics Co.,Ltd

YS-IH882 with Empty chip detection

Hand-Held Reel Rolling machine

Other

Hand-Held Reel Rolling machine can collection and discharge automatically replace the manual, it's convenient, fast, and improve the working efficiency....

Qinyi Electronics Co.,Ltd

Hand-Held Reel Rolling machine

QXJ-NC36 SMT pick and place nozzle cleaning machine

Cleaning Equipment

QXJ-NC32 SMT pick and place nozzle cleaning machine In the field of the semiconductor industry today, with the development of SMT, small parts into small, high-density mounting and base for reality, and future development tren...

Qinyi Electronics Co.,Ltd

 QXJ-NC36 SMT pick and place nozzle cleaning machine

Panasonic Capacitor Feeder

Pick & Place

Panasonic Capacitor Feeder Loading the vertical electronic components in feeder,  feeder supply components for pick and place machine to plug-ins.  Electronic operation,Seamless communication with pick and...

Qinyi Electronics Co.,Ltd

Panasonic Capacitor Feeder

Yamaha mechanical feeder calibration Jig

Pick & Place

Product Name:Yamaha feeder calibration Jig  Product Model :  Product Specifications: Application:  Used for adjust various brand of SMT machine feeders Power: 220V Condensed Air requirement: 5kg/cm...

Qinyi Electronics Co.,Ltd

Yamaha  mechanical feeder calibration Jig

Qinyi Electronics Co.,Ltd

we can supply SMT machines,SMT spare parts,SMT production consumable and AI spare parts at competitive prices ,like feeders,nozzles,filters,servo motors and various boards . for JUKI,SAMSUNG,Panasonic

Shenzhen, China

Distributor

Panasonic CM402/602 original feeder

Pick & Place

panasonic CM402/602 feeder Description CM402/602 feeder 8mm dbl with sensor used CM402/602 feeder 8mm dbl with sensor new new CM402/602 feeder 12/16mm with sensor  new CM402/602 feeder 24/32mm with sens...

ZK Electronic Technology Co., Limited

Panasonic CM402/602 original feeder

Samsung Feeder Cart smt storage feeder trolley for samsung SM series feeder

Pick & Place

Samsung Feeder Cart smt storage feeder trolley for samsung SM series feeder Description: 1.Suitable for SMT workshop feeder placed, prepare feeder materials ahead of time, improve production efficiency. 2.Stainless steel we...

ZK Electronic Technology Co., Limited

Samsung Feeder Cart smt storage feeder trolley for samsung SM series feeder

JUKI 8MM FEEDER CF081CR CN081CR

Pick & Place

JUKI 8MM FEEDER CF081CR CN081CR We have 500+ original brand new CF081CR CN081CR feeder in stock, welcome contact us! M/P: +86 15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysm...

ZK Electronic Technology Co., Limited

JUKI 8MM FEEDER CF081CR CN081CR

2-88mm feeders Fuji XPF compatible

Pick & Place

2-88mm feeders Fuji XPF compatible 2-88mm feeders Fuji XPF compatible We have this feeder in stock, original used & working wel, if you have any interest, just contact us. M/P: +86 15323874439 Email: bec...

ZK Electronic Technology Co., Limited

2-88mm feeders Fuji XPF compatible

JUKI NF 8*4MM ORIGINAL USED FEEDER

Pick & Place

JUKI NF 8*4MM ORIGINAL USED FEEDER OFFER JUKI NF feeders: JUKI NF8*2MM NF8*4MM NF12MM NF16MM NF24MM NF32MM NF44MM NF56MM FEEDER(original used ). Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn...

ZK Electronic Technology Co., Limited

JUKI NF 8*4MM ORIGINAL USED FEEDER

Fuji XP 72MM MOTORIZED FEEDER

Pick & Place

FUJI XP 72MM MOTORIZED FEEDER  www.smt-cn.com...

ZK Electronic Technology Co., Limited

Fuji XP 72MM MOTORIZED FEEDER

YAMAHA NOZZLE SERIES

Pick & Place

YAMAHA NOZZLE SERIES Brand Model Specification Material of nozzle tip YAMAHA YV100II 31#NOZZLE 0402 / 0603 / 0805 (X) Tungsten steel YAMAHA YV100II 31#NOZZLE 0402 / 0603 / 0805 (X) Diamond steel YAMAHA YV100...

ZK Electronic Technology Co., Limited

YAMAHA NOZZLE SERIES

SAMSUNG feeder 8*4mm for CP45

Pick & Place

SAMSUNG feeder 8*4mm for CP45 Samsung CP40/ CP45FV NEO 8*4mm feeder...

ZK Electronic Technology Co., Limited

SAMSUNG feeder 8*4mm for CP45

Smt shaft Samsung CP33 Holder

Pick & Place

Smt shaft Samsung CP33 Holder...

ZK Electronic Technology Co., Limited

Smt shaft Samsung CP33 Holder

Siemens Feeder storage cart smt trolley for siemens X series feeder

Pick & Place

Siemens Feeder storage cart smt trolley for siemens X series feeder Description: 1.Suitable for SMT workshop feeder placed, prepare feeder materials ahead of time, improve production efficiency. 2.Stainless steel welding wh...

ZK Electronic Technology Co., Limited

Siemens Feeder storage cart smt trolley for siemens X series feeder

Panasonic BM Series feeder

Pick & Place

Hello, we have lot of the Panasonic BM series electronic feeders in stocks for sale, if you have any interests just feel free to contact me or you can see more details at our website www.tek-smt.com Thank you! We are profession...

ZK Electronic Technology Co., Limited

Panasonic BM Series feeder

Samsung Holder SM431 Z Axis shaft

Pick & Place

Samsung Holder SM431 Z Axis shaft...

ZK Electronic Technology Co., Limited

Samsung Holder SM431 Z Axis shaft

Samsung Smt Stick Feeder 110MM(4 Input Channels) for samsung SM series smt machine

Pick & Place

Samsung Smt Stick Feeder 110MM(4 Input Channels) for samsung SM series smt machine Specification: Voltage: 24V Width: 110MM (4 Input Channels ) Overall size : 500 x 110 x 180 mm Applied to: SM series...

ZK Electronic Technology Co., Limited

Samsung Smt Stick Feeder 110MM(4 Input Channels) for samsung SM series smt machine

Samsung N045 nozzle

Pick & Place

Samsung N045 nozzle...

ZK Electronic Technology Co., Limited

Samsung N045 nozzle

JUKI ATF E1001706ABO AF05HP feeder

Pick & Place

JUKI ATF E1001706ABO AF05HP feeder Dear friend, Thanks for your visit. We have 300+ JUKI ATF E1001706ABO AF05HP feeder in stock, if you are interested in them, feel free to contact us. M/P: +86 15323874...

ZK Electronic Technology Co., Limited

JUKI ATF E1001706ABO AF05HP feeder

PANASONIC BM221 Filter 1086289282

Pick & Place

PANASONIC BM221 Filter 1086289282 Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysmt Website: www.smt-cn.com...

ZK Electronic Technology Co., Limited

PANASONIC BM221 Filter 1086289282

Siemens SIEMENS 904 NOZZLE

Pick & Place

Siemens SIEMENS 904 NOZZLE SIEMENS 904 NOZZLE 00322545-01 PICK UP NOZZLE 416 00322543-01 PICK UP NOZZLE 417 00322544-01 PICK UP NOZZLE 418 00322546-01 PICK UP NOZZLE 419 03012036-01 PICK...

ZK Electronic Technology Co., Limited

Siemens SIEMENS 904 NOZZLE

Panasonic feeder 44/56mm KXFW1KS8A00 with sensor

Pick & Place

Panasonic feeder 44/56mm KXFW1KS8A00 with sensor Dear Customer, Good day. We have 50+ Panasonic feeder 44/56mm KXFW1KS8A00 with sensor in stock, all of them are original brand new, if you have any requirement,&nb...

ZK Electronic Technology Co., Limited

Panasonic feeder 44/56mm KXFW1KS8A00 with sensor

Samsung SM Series feeders

Pick & Place

Samsung SM Series feeders We have lot of Samsung SM Serise feeders in stock for sale. 8x2/4, 12/16/24/32/44/56mm available. Any interested please contact me for more details. Thanks! We are professional SMT...

ZK Electronic Technology Co., Limited

Samsung SM Series feeders

SMT Samsung CP feeder 32mm non-stop type NF for pick and place machine

Pick & Place

SMT Samsung CP feeder 32mm non-stop type NF for pick and place machine Samsung SM/CP40 CP45 Feeders models: SAMSUNG SM 8*2mm FEEDER SAMSUNG SM 8*4mm FEEDER SAMSUNG SM 12mm FEEDER SAMSUNG SM 16mm FEEDER...

ZK Electronic Technology Co., Limited

SMT Samsung CP feeder 32mm non-stop type NF for pick and place machine

ZK Electronic Technology Co., Limited

ZK Electronic Technology Co., Limited professional in Surface-Mount Technology area and supports most major brands of electronic asembly equipments with a large selections of compatible SMT.

Shenzhen, China

Assembly, Pick and Place, Test Services, Equipment Dealer / Broker, Distributor

MFX-2200C-D Multi-User Particle Fume Extraction System Digital

Fume Extraction

The multi-user MFX-2200C Fume Extraction System provides the ultimate performance in a compact size that easily fits under most workbenches. It is ideal for removing solder fumes and filtering laser fumes. Features and Benefits :...

Metcal

MFX-2200C-D Multi-User Particle Fume Extraction System Digital

MX-500 Soldering, Desoldering & Rework - Dual Switchable

Rework & Repair Equipment

Metcal’s MX-500 Soldering and Rework System has been reimagined, adding features and a new look to a bench top icon. The system utilizes SmartHeat® Technology, wherein each cartridge is equipped with a self-r...

Metcal

MX-500 Soldering, Desoldering & Rework - Dual Switchable

MX-5210 Dual Port Simultaneous Soldering and Rework System

Rework & Repair Equipment

New Dual Port Simultaneous Soldering and Rework System highly effective for soldering applications including: lead-free, high mass components or boards, thermally sensitive components requiring low operating temperature, high volume production sol...

Metcal

MX-5210 Dual Port Simultaneous Soldering and Rework System

DX-350 Programmable Digital Dispenser 0 to 100 psi (0 to 6,9 bar)

Hand Assembly

The DX-350 Series offers 10 user programmable dispense routines and 4 operating modes. The time, pressure and vacuum read-outs are displayed digitally.  It is intuitive to use and allows accurate reproduction of sequences of beads or dots. The D...

Metcal

DX-350 Programmable Digital Dispenser 0 to 100 psi (0 to 6,9 bar)

BVX-101 Bench-Top, Single User Arm/Plenum System, Pre-HEPA-Gas

Fume Extraction

The BVX-101 is a single user, PRE-HEPA-GAS volume extraction system designed to be used directly on the workbench. The unit is designed with an innovative adaptor which allows the user to choose between plenum or arm extraction options....

Metcal

BVX-101 Bench-Top, Single User Arm/Plenum System, Pre-HEPA-Gas

BTX-208 Portable Tip Extraction System

Fume Extraction

The BTX-208 Fume Extraction System is a tip extraction unit with a high vacuum blower motor and a capacity for up to eight workstations. Features and Benefits: High performance extraction directly from the tip of any ir...

Metcal

BTX-208 Portable Tip Extraction System

MFR-1351 Solder /Desolder System with Internal Pump

Rework & Repair Equipment

The MFR-1350 features a soldering hand-piece and a desoldering gun. The power supply has an internal pump providing 0.7 bar of vacuum suction force combined with Smartheat® technology that makes soldering, rework and through-hole desoldering e...

Metcal

MFR-1351 Solder /Desolder System with Internal Pump

DX-250 Economical Digital Dispenser/Controller 0 to 100 psi (0 to 6,9 bar)

Hand Assembly

The DX-250 Series Digital Dispenser/Controller is economical, highly accurate and repeatable micro-air dispensing system. This precision fluid dispensing system includes digital timer and vacuum control for all viscosities of fluids. Packaged read...

Metcal

DX-250 Economical Digital Dispenser/Controller 0 to 100 psi (0 to 6,9 bar)

HCT2-120 Digital Hot Air Pencil

Rework & Repair Equipment

The new HCT2-120 Hot Air Pencil is the latest addition to Metcal’s offering of convection rework tools. This digital handheld convection tool is ideally suited for light rework applications, which use smaller components and integrated circui...

Metcal

HCT2-120 Digital Hot Air Pencil

PS-900 Value Production Soldering - Single Output

Rework & Repair Equipment

The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint. Features and Benefits: SmartHeat® temperature control Ergonomic, lightweight handle Rugged cast...

Metcal

PS-900 Value Production Soldering - Single Output

SBK-CHIPRP-KIT Solder Ball Placement Kit

Rework & Repair Equipment

Reworking small chip components like 01005, 0201, 0402, & 0602s are difficult and require specialized tools. Metcal has developed a technique and identified a selection of tools that enable the operator to rework these small componen...

Metcal

SBK-CHIPRP-KIT Solder Ball Placement Kit

PCT-1000 Programmable Preheater

Rework & Repair Equipment

The PCT-1000 is a programmable preheater that provides users the ability to increase heat capacity with highly controlled thermal output. The PCT-1000 can be used in a variety of processes including soldering, desoldering, SMD rework operations an...

Metcal

PCT-1000 Programmable Preheater

HCT-1000 Programmable Hand Held Convection Tool

Rework & Repair Equipment

The HCT-1000 System is a fully programmable hand held convection rework tool that can both remove and place SMT components. It features digital controls, in-ternal or external thermocouple feedback control, program storage of up to 50 profiles and...

Metcal

HCT-1000 Programmable Hand Held Convection Tool

MX-5250 Dual Port Simultaneous Desoldering System

Rework & Repair Equipment

New Dual Port Simultaneous Desoldering System designed for plated-through-hole component desoldering. The easy-to-grip handle allows the task to be completed quickly and comfortably. This "shop-air" hand tool, in combination with the new...

Metcal

MX-5250 Dual Port Simultaneous Desoldering System

MFR-1100 Single Output Soldering, Desoldering & Rework Stations

Rework & Repair Equipment

The MFR-1100 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge or tweezers and offers a choice of four hand-pieces. The MFR-1110 comes with one cartridge soldering hand-piece. The cartridge hand...

Metcal

MFR-1100 Single Output Soldering, Desoldering & Rework Stations

MX-500UF Ultra Fine Soldering / Rework System

Rework & Repair Equipment

New MX-500UF Soldering and Rework System with UltraFine Soldering Hand-piece for soldering and touch-up of very small components, restricted access or high density component packaging on a PCB. The system utilizes SmartHeat®...

Metcal

MX-500UF Ultra Fine Soldering / Rework System

PS-900-SOLAR Solar Soldering System - Tip Hand-piece

Rework & Repair Equipment

The need to reduce PV manufacturing costs combined with the present shortage of polysilicon feedstock are driving a steady reduction in wafer and cell thicknesses. The PS-900-Solar Soldering System is the perfect solution Soldering of wires (tabs...

Metcal

PS-900-SOLAR Solar Soldering System - Tip Hand-piece

MRS-1100A Advanced Modular Rework System

Rework & Repair Equipment

The MRS-1100A Modular Rework System is an integrated convection rework system for the removal and reflow of BGA/CSP and SMT components. The MRS-1100A is comprised of a hand held convection tool, preheater, adjustable tool holder, and free-standing...

Metcal

MRS-1100A Advanced Modular Rework System

BVX-201-KIT1 Filter Unit with 2 BVX-ARM-K1, Pre-HEPA-Gas

Fume Extraction

The BVX-201-KIT is a two operator, PRE-HEPA-GAS volume extraction system with two BVX-ARM-K1 designed to be used adjacent to the workbenches. Features and Benefits : Two station design for dynamic fume extraction...

Metcal

 BVX-201-KIT1 Filter Unit with 2 BVX-ARM-K1, Pre-HEPA-Gas

PCT-102-21 Focus Pre-heater, 230V with arm rest, free-standing board holder.

Rework & Repair Equipment

The PCT-100 Focus Pre-heater targets heat for improved speed and efficiency for high thermal demand applications, including lead-free. Used for SMT and through-hole hand processes, the PCT-100 uses convection air heating to heat a PCB first, for b...

Metcal

PCT-102-21 Focus Pre-heater, 230V with arm rest, free-standing board holder.

Metcal

Manufacturer of high-performance precision rework systems for the electronics bench. Product lines include: Hand Soldering and Desoldering, Convection Rework products, Fume Extraction and Fluid Dispensing tools.

Cypress, California, USA

Manufacturer of Assembly Equipment, Adhesives/Dispensing, Repair/Rework, Soldering

Yamaha SMT Nozzles, Tooling, & Consumables (YV, YG, YS, & more)

Pick & Place

We offer a wide selection of the Yamaha SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...

Count On Tools, Inc.

Yamaha SMT Nozzles, Tooling, & Consumables (YV, YG, YS, & more)

Fuji Nozzles (NXT, XP, CP-6, CP-7, QP3, IP3, & more)

Pick & Place

We offer a wide selection of the Fuji SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufactu...

Count On Tools, Inc.

Fuji Nozzles (NXT, XP, CP-6, CP-7, QP3, IP3, & more)

QWIKTRAY Custom Matrix Trays for Electronic Components

Pick & Place

Do you have a unique component that isn’t available in tape and reel? Tired of hand placing those components because you don’t have a compatible feeder? Can’t find J...

Count On Tools, Inc.

QWIKTRAY Custom Matrix Trays for Electronic Components

Samsung SMT Nozzles, Tooling, & Consumables (CP40, CP45, CP60, SM, & more)

Pick & Place

We offer a wide selection of the Samsung SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality...

Count On Tools, Inc.

Samsung SMT Nozzles, Tooling, & Consumables (CP40, CP45, CP60, SM, & more)

Custom Engineered SMT Nozzles & Tooling

Pick & Place

Effective Solutions for any Odd-Form Application on any OEM Platform. Count On Tools has the experience and manufacturing flexibility to be able to develop custom engineered solutions to satisfy your individual Proc...

Count On Tools, Inc.

Custom Engineered SMT Nozzles & Tooling

INSTOCK Consigment Program for SMT Nozzles, Tooling, & Consumables

Pick & Place

The INSTOCK Consignment Plus Program has been developed to give EMS companies and contract manufacturers immediate access to project critical products with no up-front inventory costs or risk of overstock. INSTOCK program serves particip...

Count On Tools, Inc.

INSTOCK Consigment Program for SMT Nozzles, Tooling, & Consumables

ezCLIP Universal Stop Clip for PCB Magazine Racks

Pick & Place

Introducing the ezCLIP universal stop clip for PCB magazine racks. The ezCLIP system was created to allow electronics manufacturers who manually load/unload PCB magazine racks a simple way to distinguish required spacing between boards and to p...

Count On Tools, Inc.

ezCLIP Universal Stop Clip for PCB Magazine Racks

Universal SMT Nozzles, Tooling, & Consumables

Pick & Place

We offer a wide selection of the Universal SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quali...

Count On Tools, Inc.

Universal SMT Nozzles, Tooling, & Consumables

Mycronic Mydata SMT Nozzles, Tooling, & Consumables (Midas & Hydra)

Pick & Place

The new series of Mydata replacement nozzles, for both the Midas and Hydra mountheads, are the only direct replacement for OEM nozzles on the market. We also offer custom engineering to standar...

Count On Tools, Inc.

Mycronic Mydata SMT Nozzles, Tooling, & Consumables (Midas & Hydra)

Ipulse SMT Nozzles, Tooling, & Consumables (M1, M2, M4, M6, M7, M8, & more)

Pick & Place

We offer a wide selection of the IpulseSMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...

Count On Tools, Inc.

Ipulse SMT Nozzles, Tooling, & Consumables (M1, M2, M4, M6, M7, M8, & more)

Custom LED Nozzles & Pick Up Tools

Pick & Place

Count On Tools specializes in custom engineered nozzles for all types of LEDs (Cree, Luxeon, Phillips, NIchia, Osram, etc). Recent growth in LED technology and solid state lighting has provided the electronics manufa...

Count On Tools, Inc.

Custom LED Nozzles & Pick Up Tools

Mycronic / Mydata Feeder Repair Service

Pick & Place

Count On Tools now offers repair services for MYDATA Agilis Feeders. This program will be available for the 3.7, 4.0, 4.7, and 5.4 Agilis feeders. This is the only repair option for these feeders on the market and provides significant costs sav...

Count On Tools, Inc.

Mycronic / Mydata Feeder Repair Service

ezLOAD PCB Support System

Board Handling - Pallets, Carriers, Fixtures

Count On Tools Inc., a leading provider of precision components and SMT spare parts, introduces the new ezLOAD PCB Support System. With the recent increase of densely populated double-sided circuit boards, COT recognized the need for more affordab...

Count On Tools, Inc.

ezLOAD PCB Support System

Mirae SMT Nozzles, Tooling, & Consumables

Pick & Place

We offer a wide selection of the Mirae SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...

Count On Tools, Inc.

Mirae SMT Nozzles, Tooling, & Consumables

Assembleon SMT Nozzles, Tooling, & Consumables (Emerald, Opal, Topax, Saphire, MC, MG, & more)

Pick & Place

We offer a wide selection of the Assembleon SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high qual...

Count On Tools, Inc.

Assembleon SMT Nozzles, Tooling, & Consumables (Emerald, Opal, Topax, Saphire, MC, MG, & more)

Hitachi SMT Nozzles, Tooling, & Consumables (Sigma, GXH, & more)

Pick & Place

We offer a wide selection of the Hitachi SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality...

Count On Tools, Inc.

Hitachi SMT Nozzles, Tooling, & Consumables (Sigma, GXH, & more)

StripFeeders Adjustable Feeder System

Tape and Reel Equipment

Why purchase expensive feeders for each component when you only need to place a few at a time? Count On Tools Inc. (COT), a leading provider of precision components and SMT spare parts, introduces the revolutiona...

Count On Tools, Inc.

StripFeeders Adjustable Feeder System

LED Nozzles

Pick & Place

Recent growth in LED technology and solid state lighting has provided the electronics manufacturing industry with viable solutions for today's electronic devices. As a result, companies in the surface mount technology (SMT) industry are expanding...

Count On Tools, Inc.

LED Nozzles

Juki SMT Nozzles, Tooling, & Consumables (KE, FX, JX, RX, & more)

Pick & Place

We offer a wide selection of the Juki SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality, l...

Count On Tools, Inc.

Juki SMT Nozzles, Tooling, & Consumables (KE, FX, JX, RX, & more)

Panasonic SMT Nozzles, Tooling, & Consumables (CM402, CM602, NPM, MSF, BM, HT, MSR, MV, & more!)

Pick & Place

We offer a wide selection of the PanasonicSMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high qualit...

Count On Tools, Inc.

Panasonic SMT Nozzles, Tooling, & Consumables (CM402, CM602, NPM, MSF, BM, HT, MSR, MV, & more!)

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

TS924 Foot Valve Dispensers

Dispensing

Entry Level Foot Valve Dispensers. The TS924 dispenser offers the best of both worlds: increased production combined with dispenser economy. Floor mounted, they have a built in pressure regulator, pressure gauge and a unique fast-dump,...

Techcon Systems

TS924 Foot Valve Dispensers

TSR2000 Dispensing Robots

Dispensing

Bench-top Dispensing Robots. Designed and configured specifically for fluid dispensing applications, Techcon Systems robots provide total control over fluid placement, from beads, arcs and circles to repeated timed dots. Programming is...

Techcon Systems

TSR2000 Dispensing Robots

TS350 Digital Fluid Dispenser

Dispensing

Advanced Digital Fluid Dispenser 0-100 psi (0-6.9 bar) The TS350/355 Series dispenses low, medium and high-viscosity fluids accurately and consistently. The TS350/355 Series is immediately usable anywhere in the world with its accompan...

Techcon Systems

TS350 Digital Fluid Dispenser

Fluid Dispensing Valves

Dispensing

Techcon Systems offers a wide range of fluid dispensing valves from simple manual dispensing to precision valves for high speed automated applications. These valves are state-of-the-art products designed for spraying conformal coatings...

Techcon Systems

Fluid Dispensing Valves

TS250 Digital Dispensers

Dispensing

Entry Level Digital Dispensers The TS250/255 Series dispenses low, medium and high-viscosity fluids accurately and consistently. The TS250/255 Series is immediately usable anywhere in the world with its accompanying tools, accessories...

Techcon Systems

TS250 Digital Dispensers

Techcon Systems

Techcon offers a wide array of fluid dispensing products and provides dispensing components ranging from disposable accessories to complete microprocessor-controlled dispensing systems, and precision valves.

Cypress, California, USA

Manufacturer of Assembly Equipment, Adhesives/Dispensing

IPC Standards

Education/Training

IPC standards, the results of industry consensus and collaboration, are respected throughout the whole world. Using IPC standards allows manufacturers, customers and suppliers to speak the same language....

Association Connecting Electronics Industries (IPC)

IPC Standards

IPC Market Research

Education/Training

The Electronics Industry’s Source of Data and Insights for Smart Business Decisions. The IPC Technology Market Research Council offers members unique and customized research for the electronics assembly industry. Network with...

Association Connecting Electronics Industries (IPC)

IPC Market Research

IPC Training & Certification

Education/Training

IPC's Professional Development department sponsors certification programs for acceptability of electronics assemblies; soldering; repair/rework; and acceptability of printed boards. In addition, a wide variety of video and computer based tr...

Association Connecting Electronics Industries (IPC)

 

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Training Provider, Events Organizer

E3G BGA Rework Station

Rework & Repair Equipment

The PDR E3G Evolution - Next Generation Rework System -  is made of only the finest materials and components for optimum precision and rework excellence. Combining PDR's ThermoActive software...

PDR-America

E3G BGA Rework Station

PDR IR-C3i Entry Level Software Controlled Focused IR Rework System

Rework & Repair Equipment

The PDR IR-C3  Chipmate - Auto Profile Software Controlled Focused IR Rework System utilises PDR's ThermoActive Suite Software and is designed specifically for the removal and replacment of SMT/SMD compo...

PDR-America

PDR IR-C3i Entry Level Software Controlled Focused IR Rework System

IR-TS One Thermal Test System - Benchtop

Test Equipment

The PDR IR-TS One HALT/HASS Test System has been designed to thermally cycle key critical components and assemblies to detect defects. Using PDR’s unique Non-Destructive Dual Thermal Stress Screening Process, based on a variation on HALT/HAS...

PDR-America

IR-TS One Thermal Test System - Benchtop

IR-E6 Evolution BGA Rework Station for PCB's up to 24

Rework & Repair Equipment

Ultimate Performance, BGA Rework Station for small-large PCBs up to 24"/620mm The PDR E6 XL BGA Rework Station is made of only the finest materials and components for optimum precision and rework excellenc...

PDR-America

IR-E6 Evolution BGA Rework Station for PCB's up to 24

E3M SMD Rework System for Micro Re Work

Rework & Repair Equipment

PDR E3M  Rework System for Micro SMD Rework is made of only the finest materials and components for Micro- BGA Rework, 0201 Rework, CSP Rework, uBGA Rework, LED Rework, area Array Rewor...

PDR-America

E3M SMD Rework System for Micro Re Work

E3S Rework Station Designed for BGA Packages - SMD Rework

Rework & Repair Equipment

The PDR E3S SMD Rework Station offers dual closed loop feedback for advanced BGA Repair, QFN Repair, Flip Chip Repair, DFN repair, QFP's, SOIC's and more, and is  is engineered wit...

PDR-America

E3S Rework Station Designed for BGA Packages  - SMD Rework

PDR D3Vi Lower Cost Discovery Series Rework Station for PCBs upto 12

Rework & Repair Equipment

Professional SMD Rework Station for PCBs upto 12"/300mm. The PDR IR-D3Vi Discovery provides all the essential features for quality rework and is made of only the finest...

PDR-America

PDR D3Vi Lower Cost Discovery Series Rework Station for PCBs upto 12

PDR IR-C3 Chipmate Entry-Level SMD/BGA Rework Station

Rework & Repair Equipment

The PDR IR-C3  Chipmate is designed specifically for the removal and replacment of SMT components and connectors when high-end optical placement systems are not required. The system easily tack...

PDR-America

PDR IR-C3 Chipmate Entry-Level SMD/BGA Rework Station

PDR-America

PDR manufactures IR BGA rework stations, BGA rework equipment, and SMD rework stations. SMD soldering solutions for BGA Rework, CSP Rework, QFN Rework, LED Rework, 0201 Rework and more. Also offers thermal test equipment. est.1987

Shingle Springs, California, USA

Repair/Rework, Soldering, Manufacturer of Test Equipment

Hand Soldering Training

Education/Training

The purpose of these courses is to promote best manufacturing practices and enhance the individual’s job performance. These courses are indispensable for everyone involved in Electronics Manufacturing. Blackfox is widely recognized in the...

Blackfox Training Institute, LLC

Hand Soldering Training

PRO-STD-001 Certification

Education/Training

Course for Counterfeit Component Detection and Prevention Blackfox and ProSkill CTG offers a unique and comprehensive course; PRO-STD-001 Certification, a meaningful Course for Counterfeit Component Detection and Prevention. Have...

Blackfox Training Institute, LLC

PRO-STD-001 Certification

IPC Certification

Education/Training

IPC - Association Connecting Electronics Industries® offers globally recognized industry-traceable training and certification programs on key Electronics Industry Standards. Blackfox, founded in 1996, is the premier Worldwide Approved IPC T...

Blackfox Training Institute, LLC

IPC Certification

Lead-Free Solder Training

Education/Training

Blackfox’s Lead Free Soldering series minimizes the risks of conversion, and gives you the confidence to introduce lead free products and services quickly, with highest quality. The lead free certification program offers the latest requir...

Blackfox Training Institute, LLC

Lead-Free Solder Training

Blackfox Training Institute, LLC

Blackfox is the industry leader inproviding IPC Certifications, Solder Training, Customized Training Programs, and Counterfeit Component Training and Certification.

Longmont, Colorado, USA

Soldering, IPC Standards Certification Center, Consultant, Training Provider

PYRAMAX™ ZeroTurn Dual Chamber Reflow Oven

Reflow

Eliminate reflow oven changeover time. The PYRAMAX ZeroTurn is designed for high volume electronics manufacturers who must also manage process mix and are dissatisfied with the poor process separation of other dual chamber machines....

BTU International

PYRAMAX™ ZeroTurn Dual Chamber Reflow Oven

Pyramax - Convection Reflow Oven

Reflow

BTU’s Pyramax™ family of high-throughput thermal processing system...

BTU International

Pyramax - Convection Reflow Oven

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer of Assembly Equipment

PCB Cleaning Agents

Cleaning Agents

Novel, innovative aqueous, semi-aqueous as well as solvent-based cleaning agents for printed circuit board defluxing processes are able to effectively remove all types of flux residues, ranging from RMA and OA to newly developed s...

ZESTRON Americas