SMT / PCB Products and Services
SMT, PCB Manufacturing products and services offered by SMTnet members.
This product does not exist or has been removed.
Browse other electronics manufacturing products.
Resistors
A resistor is a two-terminal electronic component made of resistive material with a certain structural form that can limit the flow of current in a circuit. The resistance value of a resistance element is generally dependent on temperature, material,...
Filters
Filter is a filter circuit consisted of capacitance, inductance and resistance. The filter can effectively filter out the frequency points of a specific frequency or frequencies outside the frequency point in the power line, and obtain a power signal...
Isolators
Isolators are a kind of linear optical coupling isolation principle that output and convert the input signal. The input, output and working power supply are isolated from each other. Isolator, also known as signal isolator, is an significant part of...
Discrete Semiconductor Products
A semiconductor is a material that conducts electricity between a conductor and an insulator at normal atmospheric temperature. Common semiconductor materials contains silicon, germanium, gallium arsenide, etc. Silicon is the most influential in the...
Circuit Protection
Circuit protection is to protect electronic components in the circuit mainly in over voltage, over current, surge, electromagnetic interference. With the development of science and technology, electric/electronic products have been increasingly diver...
Crystals and Oscillators
Some electronic devices require AC signals with high frequency stability, while LC oscillators have poor stability and are prone to frequency drift. In the oscillator using a special element - quartz crystal, can produce a highly stable signal, the u...
Capacitors
Sandwiched between a layer of non-conductive insulation, two conductors close to each other, which constitutes a capacitor. A capacitor is a component that stores charge, and its storage is called capacity. Capacitors can be generally divided into fi...
RF/IF and RFID
A reader, an electrical tag and data management system constitute an integrated RFID system. Radio Frequency Identification (RFID) is also regarded as a type of automatic identification technology. It carries out non-contact bidirectional data commun...
Sensors, Transducers
A sensor is a device that converts non-electrical quantities (such as temperature, humidity, light, magnetic field, sound, etc.) into electrical signals.Many types of sensors, mainly divided into physical sensors and chemical sensors. The physical...
Memory Cards, Modules
In the integrated circuit, the circuit with storage function without physical form is also known as memory, such as RAM, FIFO, etc.; In the system, the storage device with physical form is also called memory, such as memory stick, TF card, etc. All t...
Connectors, Interconnects
Connectors is a device that connects two active devices to transmit currents or signals. Domestic connectors, known as the connector and socket, generally refers to electrical connectors. Essential performances of connectors and interconnects can be...
Power Supplies - Board Mount
A power supply is a device that converts other forms of energy into electrical energy and supplies electrical energy to a circuit (electronic device). It provides the electrical energy needed by all the components in a computer. The size of power sup...
Optoelectronics
Electronic displays refers to information display devices that use electronic technology to transform imperceptible signals into perceptible signals. Their characteristics include small-space occupancy, flexible display format, and simultaneously dis...
Integrated Circuits (ICs)
An integrated circuit is a circuit with specific functions that integrates a number of common electronic components, such as resistors, capacitors, transistors, etc., and the connections between these components through semiconductor technology. Thro...
Relays
A relay is an electrical control device that can give a specified amount of input and hold it long enough to make a predetermined change in the controlled amount in the electrical output circuit. When the input drops to a certain level and remains fo...
Distributor of hot-sales and hard-to-find electronic and electromechanical components and supplies. Online catalogue, data sheets and purchasing. win-source.net
SPOKANE, Washington, USA
ESD Equipment
ESD Equipment For Sale Protect your sensitive PCBs with our wide selection of static control solutions. Reduce risks and costs associated with static electricity. We strive to provide the lowest cost and highest quality ESD accesories and factory s...
Feeders
We stock and trade in all type of SMT feeders. Fuji · ASM · Yamaha · Panasonic· ·Samsung · Universal· Label Feeders Vibratory Feeders Tray Feeders and Towers Feeders Fuji – Medidas: W08f, W12c, W16c, W24c, W32c, W44c, W56c, W72, W88. Feeder...
We are a global electronics manufacturing Solutions provider ....Our company supplies new and used SMT equipment, spare parts, consumibles, ESD supplies and services to a wide range of EMS companies.
Jalisco, Jalisco, Mexico
PCB Rework, PCB Repair Services
On the cutting edge of technology, we offer a full line of high tech services to assist contract manufacturer's and product research and developers. Specializing in quick turn around times to help get your product to market...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 23mm x 23mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 23mm x 23mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 27mm x 27mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 27mm x 27mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Flux, Tacky, Amtech
We stock Amtech and Chip Quik Tacky Fluxes and Solder Paste. Availalbe in 10cc Syringe, 75 Gram and 150 Gram Jars. Check out our on line store: https://precision-pcb-services-inc.myshopify.com/collections/all Or...
IPC-A-610D - Acceptability of Electronic Assemblies - 1 Day Classes
This latest version D of the IPC-A-610 released in Released February 2005, Presented in a one day class this is a must for all quality assurance and assembly departments. IPC-A-610D illustrates industry-accepted workmanship crite...
BGA Reballing Fixture, Hi Yield
Custom made reballing fixtures designed for your specific component. Allows for high yield reballing of multiple parts at one time. Use for ball attach to BGA components and for solder bumping of LGA's and QFN's. Simply s...
Automatic BGA Rework Station for Large Boards
Higher Yield - Higher Productivity - Fewer Operators with the Model ZM-R8000B Hot Air BGA Rework Station from Precision PCB Services, Inc. Automatic BGA Rework Station uses machine vision to automatically align component to the circ...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 40mm x 40mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 40mm x 40mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
ZM-R750 PC Controlled BGA Rework Station
The Model ZM-R750 BGA Rework station features Industrial Computer control that will automatically save the temperature curve to generate a large number of log files to facilitate the recall of historical parameters for traceability. Ideal for thos...
ZM-R730A BGA Rework Station
The ZM-R730A BGA Rework Station can place very small BGA's down to 0.1mm pitch, large BGA's up to 90mm on standard models and can be cusomized to place up to 130mm Chips. Currently the only machine available on the market with a robotic Vi...
ZM-R7850A Nitrogen Capable BGA Rework Station
The Zhuomao ZM-R7850A BGA Rework Station is a top of the line Nitrogen Capable Rework System. Great to help increase yield with Lead Free Solders and a no clean process. Place SMD components from .8mm to 80mm with the high resolu...
BGA Rework Services
BGA Rework Services Offered BGA Remove and Placement Level Three Pad Repair Wire Add Trace Repair BGA Re-Balling BGA Inspection We...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 25mm x 25mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 25mm x 25mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 17 X 17mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 17mm x 17mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 21mm x 21mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 21mm x 21mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
BGA Nozzles for the SRT, Shuttle Star, and Zhuomao Rework Machines
We carry a large selection of BGA Nozzles for the SRT, Shuttle Star, and Air Vac BGA Rework Machines. We also provide custom designed nozzles for your specific requirements. Prices Range from $100.00 to $450.00 each....
SRT BGA Rework Station Repair Services
BGA Rework Station Services for: SRT 1000, 1100, 1100HR, 2000 plus , Shuttle Star and Zhuomao Brands. Calibration Profile Set Up Computer Repair, and hard drive replacement. Used machi...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 19 X 19mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 19mm x 19mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more....
Workmanship Standards & Soldering Instruction for Through-Hole Components, Wires & Terminals
An 8 hour combined lecture, video and hands on session that includes: Soldering techniques for soldering wires to terminals including through-hole components. Identify the different types of solder terminals, con...
Nitrogen Capable SMD & BGA Rework Station Model E6250U with Cabinet
NEW! Nitrogen Capable for High Yield Lead Free BGA Rework NEW! Movable top and bottom gas heaters. NEW! All Shuttle Star BGA Rework Stations are now available with Cab...
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Oroville, California, USA
Consultant / Service Provider, Equipment Dealer / Broker / Auctions, Manufacturer's Representative, Training Provider
Vantage - Advanced Dispensing for Precision Packaging and Assembly
Our most advanced dispensing platform for electronics manufacturing The Vantage® Series is specifically designed for high-end advanced semiconductor package, electromechanical, and printed circuit board assembly. Create...
EasyCoat 6 Conformal Coating Software
EasyCoat® 6 software for conformal coating systems delivers intuitive visual programming Nordson ASYMTEK's EasyCoat® software provides precise conformal coating with process control, traceability, and intuitive visual program...
ASYMTEK Select Coat SL-1040 Conformal Coating System
With the Select Coat® SL-1040, we’ve retained the time-tested functionality of the Select Coat SL-940 and added significant system-level advancements to elevate automation, control, precision, and preventative maintenance for better yiel...
DV-03HPA High Pressure Valve with Suckback
The DV-03 is a air-actuated balanced spool valve for consistent dispensing of high viscosity fluids. For precision, you can control the amount of fluid dispensed by adjusting the fluid pressure, pulse time, and selecting the appropriat...
Forte - Advanced Dispenser
The Forte™ Series delivers exceptional dispensing productivity and accuracy for high-volume consumer electronics manufacturing, printed circuit board assembly, flexible circuit, MEMs, and electromechanical assembly applications. Next...
Spectrum II S2-900 Series Fluid Dispensers
The world-class precision and quality Spectrum® II system for assembly of mobile electronics, semiconductors, MEMS, and PCBs High Speed, High Accuracy, Precision Dispensing System. Higher consistency leads to higher...
ASYMTEK SC-450 PreciseCoat Jet
Get more precision, process options, useability, yield, and uptime with the SC-450 PreciseCoat® conformal coating jet. The SC-450 PreciseCoat conformal coating jet widens the viscosity range to provide more process options. It's...
Viscosity Control System
The Viscosity Control System maintains consistent temperature of conformal coating fluids. The system includes a heated recirculating fluid circuit to eliminate viscosity changes in temperature-responsive materials. Close-range temperature monitor...
ASYMTEK NexJet NJ-8 Jetting System with ReadiSet Jet Cartridge
The NexJet® 8 Jetting System with patented ReadiSet™ Jet Cartridge offers increased jet frequency combined with advanced consumable management - it's as easy as ReadiSet and Jet. ReadiSet Jet Cartridge reduc...
DV-8000C Heli-Flow Pump
The DV-8000C series Heli-Flow® pumps are the newest generation of encoded auger pumps. The pump has a fixed-head design for luer needle applications. The DV-8000 pump's rigid head and fluid path can withstand high pressures generated by t...
Fids-on-the-Fly High-Speed Fiducial Capture
Nordson ASYMTEK’s Fids-on-the-Fly™ option is up to 5.5X faster than the traditional stop-and-capture mode for locating fiducials. Reducing time spent performing this essential, non-dispense routine can increase UPH as much as...
DV-07 Adjustable Liquid Metering Valve
The DV-07 is a normally closed, air-actuated diaphragm valve The DV-07 dispenses low to medium viscosity fluids for a variety of applications from microdots to volume fill. The DV-07 valve tol...
Panorama - Automated Conformal Coating Line Solutions
Nordson ASYMTEK designs automated conformal coating line solutions to fit your production process. Every Panorama™ line we build, includes the right balance of equipment and process control for optimal coating efficiency. If you&rs...
Select Coat Conformal Coating Applicators - SC-350 Select Spray and the SC-300 Multi-Mode
The Select Coat Applicator Series – which includes the SC-350 Select Spray and the SC-300 Multi-Mode – is a highly-versatile conformal coating applicator that supports a wide range of fluid viscosities and is ideal for solvent or...
SC-400 PreciseCoat Jet
The SC-400 PreciseCoat® Conformal Coating Jet is ideal for applying coating materials to highly selective areas. This solution is designed for coating small substrates or substrates with high-component density, and when there are tight toleran...
DJ-9500 DispenseJet High-Speed Jet Dispensing
The DispenseJet DJ-9500 supports a long list of jettable fluids for a wide range of applications. Incorporating over 15 years of jetting experience, the DJ-9500 jet provides even more capability than its DJ-9000 predecessor. Nordson ASYM...
Qadence Flow Control for Conformal Coating
The ASYMTEK Qadence™ closed-loop flow control system maintains a stable flow rate by volume for high quality conformal coating results – automatically compensating for viscosity changes related to temperature, humidity and batch-to-bat...
DV-7000 Heli-Flow Pump
The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver epoxy. The dispense gap is mechanically controlled by the...
IntelliJet Jetting System with ReadiSet Jet Cartridge
The IntelliJet® Jetting System with patented ReadiSet™ Jet Cartridge delivers cutting-edge reliability and micro dot dispensing for manufacturing advanced semiconductor and mobile electronics packages The piezo-driven...
Quantum™ Q-6800 In-Line, Large-Format Fluid Dispensers
ASYMTEK Quantum Q-6800 High-Value Fluid Dispensing System. ASYMTEK Quantum Q-6800 Series. A high-value fluid dispensing solution for demanding applications. Large dispense area (423 x 458 mm) for varied substrate sizes...
ASYMTEK Products | Nordson Electronics Solutions
A leader in automated fluid dispensing, jetting, and conformal coating. Products include stand-alone dispensing workstations and fully automated, in-line conveyorized systems with advanced process controls.
Carlsbad, California, USA
SMT Reflow Oven - 1826 Mark 5
The World's Best SMT Convection Reflow Ovens for Large Boards and Dual Lane 1826 Mark 5 reflow oven provides consistent performance for high volume reflow requirements while minimizing preventative maintenance and floorspace....
High Volume Reflow Oven - 1936/2043 Mark5
The World's Best Convection Reflow Oven The ultimate high volume production reflow oven with belt speeds up to 1.4 m/min to accommodate the fastest pick and place systems....
Convection Reflow Oven Mk7
Convection Reflow Oven The World's Best Convection Reflow Oven for High-Throughput The New reflow oven platform revolutionizes the...
Dual Lane / Dual Temperature SMT Reflow Oven - 1910 MK5
Dual Chamber Module - Dual Chambers + Dual Blowers + Dual Heaters + Dual T/Cs. Bifurcated (Dual) chamber reflow oven allows 2 different thermal profiles to run simultaneously in the same reflow oven foot pr...
Voidless / Vacuum Reflow Soldering Oven - 1809 MK5
1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry!&...
Flux Free Formic Acid Reflow Oven - 1936 MKV
Flux Free Formic Reflow Reflow in Formic Acid Vapor Heller has designed and built an production ready horizontal reflow oven for formic acid vapor. This new oven has been designed to...
Vertical Curing Oven - Heller 788
Heller 788 In-line, Continuous Cure, Vertical Format Oven This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of fl...
860 Pressure Curing Oven (PCO)
A Pressure Cure Oven (PCO), or Autoclave, is used to minimize voiding and increase adhesion strength for bonding processes typically used in die attach and underfill applications. PCO pressurizes air into a...
Vertical Curing Mini Oven - Heller 755
The mini vertical oven has a cycle time of 25 - 60 seconds per 150mm fixture, 4mm Edge Hold Pins and Guides. PCBs up to 250mm wide can be processed. Dual Feed option for high throughoutput. In-line, vertical automation...
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
Florham Park, New Jersey, USA
5g Design Services
We provide 5G design services IOT including an expansive choice of engineering services pertaining to Internet of Things Networks that are sensor-driven in nature, ranging from IoT architecture designing and development to manufacturing....
Mechanical Design Engineering
Mechanical Design Engineering: complete mechanical design for each product or we can make modifications and improvements to your existing mechanical design. With a variety of product categories, including consumer products, me...
FMC Loopback Card
FMC Loopback Card For more details about our FMC loopback card and to download a pdf with details please visit our website....
Electronics New Product Introduction, NPI for Electronics
Electronics New Product Introduction, NPI for Electronics New product introduction engineering services and protoyping specialists. We help you get your products to market faster. Our Electronics new product...
Flying Probe TEST Services, ICT Test Services, Functional Test Services, Burn-In
We maximize test point coverage. We will give you the report of all the nets that are not being covered, so that we can cover those nets in a functional test.. We have several testing options in-house, and will offer you the right ch...
PCB Design Service
Expert Printed Circuit Design services. PCB design and engineering services including designing characterization PCB boards for new silicon, developing test plans and providing characterization services. We provide custom hardware deve...
Package Design and Simulation
We perform package design and simulation and analysis including models, data and results. ...
Connectivity Kit for FPGA
CONNECTIVITY KIT FOR FPGA The WS-709 Connectivity Kit for FPGA works with XC7VX2000T. ...
Medical Devices ISO 13485:2016 Certified Company
Whizz Systems is ISO 13485:2016 certified company provider of Electronics Manufacturing Services....
FPGA Evaluation Kit
FPGA Evaluation Kit This FPGA Evaluation kit works with XC7VX690T. The model number for this FPGA evaluation kit is WS-707A...
Kintex-7 FPGA Evaluation Kit
Kintex-7 FPGA WH705 Evaluation Kit The WS-705 Kintex-7 FPGA Evaluation Kit works with XC7K410T...
Box Build EMS
Box Build EMS We provide comprehensive Box Build EMS . We specialize in manufacturing sub-assemblies, especially Electro-Mechanical Assembly as well as PCBs with different fitments and brackets. Our expertise in...
Evaluation Kit for FPGA
WS-707B Evaluation Kit for FPGA This evaluation kit for FPGA is designed to work with XC7V2000T....
Assembly Services
Electronic Assembly Services Turnkey production assembly services from small to large sized production, production builds of various sizes, ranging from a few boards to thousands. We are also a good fit for custo...
IOT Design Service, Internet of Things Design Service, IOT Sensors Design Service
IOT Design Service, Internet of Things Design Service, IOT Sensors Design Service Expert Internet of Things Design Service / IOT Design Service. Our IOT sensor design service experts can help get your IOT architecture designed and...
Electrical Signal Integrity & Electrical Simulation Services
Electrical Signal Integrity & Simulation Services Electrical Signal integrity to measure the quality of your electrical signal. Simulation services that include multiple analyses. Pre Layout Simulation Post Layo...
FPGA Design Service
FPGA Design Service, FPGA Development Service, FPGA Prototyping Service Extensive experience with FPGA Design, Development & Prototyping. We are the preferred manufacturer and design partner for Xilinx, Altera...
Circuit Board Design Service
Circuit Board Design Service Experts Complete engineering services for circuit board design from the experts at Whizz!...
Flying Probe TEST Services, ICT Test Services, Functional Test Services, Burn-In
We maximize test point coverage. We will give you the report of all the nets that are not being covered, so that we can cover those nets in a functional test.. We have several testing options in-house, and will offer you the right ch...
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Santa Clara, California, USA
Inline solder recovery system soldering waste recovery machine SMT Solder recycle machine waste extract system
1.Characteristic: 1.Highly effective recycling of the solder waste, up to 93% yield . 2.No need to add any chemicals or reducers to the process uses physical separation to ensure a good quality pro...
Automatic Magazine/Stacked PCB Recirculation Loader Smt Magazine Loader and Vacuum Bare Board Loader For Smt Assembly
Description This equipment is used for the automatic loading operation of double-sided PCB boards and PCB light boards on SMT production lines. FEATURES 1.PLC + LED touch screen control,...
smt board handling equipment pcb loading machine electronic assembly conveyor nutek automatic bare board line loader
Shenzhen smt loader 250x350 pcb loader for smt line ...
smt board handling equipment pcb loading machine smt micro board stacker nutek automatic bare board line loader
Hot Sale pcb Push-up stacker for chip mounter Assembly Line Product introduction: 1.This equipment is used to collect bare PCBs at the end of SMT production line 2.Stable and re...
Led laptop reflow soldering machine 220v hr-10 C solder reflow oven equipment
High quality smt reflow soldering machine for sale Features: HR Series High End/Nitrogen Reflow Soldering Machine ¤Suitable For High End Products/Critical...
Factory Price Smt machine Inspection conveyor pcb reject conveyor inline smt correction conveyor
Description This equipment is used for AOI to separate the good board and the bad board. During the inspection, the good board can continue to run without hindrance Features 1.Reject,inspec...
SMT automatic 90 degrees turning machine pcb turn diverter conveyor
SMT automatic 90 degrees turning machine pcb turn diverter conveyor Product introduction: 1.PLC control system, Working is stably and reliably; 2.Enclosed design ensure the highest security level;...
Bulk capacitor component foot forming machine SC-104A designed for cutting plug-in components
Name:Semi-automatic capacitor cutting machine Model:SC-104A Voltage :220V AC 60Hz/50Hz 40W Size:L360*W300*H350MM Weight:35kg Efficiency:2500-3000PCS/H (It depends on the worker) Features:...
SMEMA Interface Reject Conveyor Dual lanes SMT PCB NG OK Buffer Conveyor Pcb Assembly line Connector
Description This equipment is used for AOI to separate the good board and the bad board. During the inspection, the good board can continue to run without hindrance Features 1.Reject,inspec...
Small pcb panel cutting machine v cut pcb depaneling machine For Aluminum SMD LED Board
Product introduction: 1.The nether linear blade is used to fix the PCB V-cut ,the upper circular blade moves to separ- ate t...
SMT assembly production line Automatic PCB Magazine Vacuum Sucking Loader automated pcb assembly machines
Product introduction: 1.PLC control system, Working is stably and reliably; 2.LED Touch screen control panel, the operation is so easy; 3.The penumatic clamps of top and bottom three point provided f...
High quality LED Production SMT PCB Push Up Magazine Destacker Loader for Bare Boards for sale
Description This equipment is used for the automatic loading operation of double-sided PCB boards and PCB light boards on SMT production lines. FEATURES 1.PLC + LED touch screen control,...
SMT Machine Automatic PCB Destacker PCB Bare Board Loader pcb loading machine
SMT Machine Automatic PCB Destacker PCB Bare Board Loader...
PCB Inspection conveyor for LED SMT Assembly Line PCB Handing electronic assembly conveyor
PCB Inspection conveyor for LED SMT Assembly Line PCB Handing electronic assembly conveyor...
PCB Assembling Machine SMT LED SMD reflow soldering machine SMT reflow oven smt welding machine
High quality smt reflow soldering machine for sale Features: HR Series High End/Nitrogen Reflow Soldering Machine ¤Suitable For High End Products/Critical...
1.2 m LED tube cooling buffer smt long board buffer conveyor
Technical Parameters HR-1200CB: Function :This machine controls the PCB first-in, first-out, or last-in first-out function. 1. Dimensions: (L) 1600x (W) 1950x (H) 1700 + 20 / -20mm 2. Product size: PCB board s...
Shenzhen Honreal Technology Co.,Ltd
Shenzhen Honreal Technology Co., focus on global Surface Mount electronic assembly field for 15 years. Specializing in providing various brands of SMT pick and place machines and spare parts. Fuji, Panasonic, Juki, Hitachi, Yahama
Shenzhen, Guangdong, China
Flason SMT Second hand Automatic1200mm Solder paste printer for SMT assembly line
Flason SMT Second hand Automatic1200mm Solder paste printer for SMT assembly line Power Supply: AC:220±10%,50/60HZ...
Fuji NXT-1 Pick and Place Machine
http://www.flason-smt.com/product/Fuji-NXT-1-Pick-and-Place-Machine.html Fuji NXT-1 Pick and Place Machine...
Yamaha YV88 Nozzle Flason SMT
http://www.flason-smt.com/product/Yamaha-YV88-Nozzle.html Yamaha YV88 Nozzle Flason SMT SMT Nozzle...
SMT Reflow Oven M6
SMT Reflow Oven M6 Max. Width of PCB 350mm Heating zones: 6 Heating method: Hot Air ...
High Speed SMT Production Line
High Speed SMT Production Line High Speed PCB Production Line High Speed SMT Assembly Line High Speed PCB Assembly Line...
Hot Air Reflow Soldering Machine F8
Hot Air Reflow Soldering Machine F8 Hot Air Reflow Soldering Machine Reflow Soldering Machine SMT Reflow Soldering Machine &...
Panasonic CM402 Pick and Place Machine-Flason SMT
http://www.flason-smt.com/product/Panasonic-CM402-Pick-and-Place-Machine.html Panasonic CM402 Pick and Place Machine Panasonic Pick and Place Machine ...
Customized PCB Storage Trolley
http://www.flason-smt.com/product/Customized-PCB-Storage-Trolley.html Customized PCB Storage Trolley Cus...
YAMAHA YV100XG chip mounter
http://www.flason-smt.com/product/YAMAHA-YV100XG-chip-mounter.html YAMAHA YV100XG chip mounter Yamaha YV100XG Chip Mounter...
Flason SMT EXCEN FLEX All-In-One SMT Modular Chip Mounter
Flason SMT EXCEN FLEX All-In-One SMT Modular Chip Mounter High Speed:850,000 CPH Ultra Slim Design with a Total Length of 1.29...
SAMSUNG Pick and Place Machine
SAMSUNG Pick and Place Machine Applicable Components: 0402~5050 Component available: Minimum 01005-38*38*8...
Online Dual head Selective Wave Soldering Machine
http://www.flason-smt.com/product/Online-Dual-head-Selective-Wave-Soldering-Machine.html Online Dual head Selective Wave Soldering Machine...
Flason SMT Solder Paste Mixer
SMT Solder Paste Mixer SMT Solder Paste Mixer Solder Paste Mixer flux Solder Paste Mixer...
Samsung CP60 Pick and Place Machine
http://www.flason-smt.com/product/Samsung-CP60-Pick-and-Place-Machine.html Samsung CP60 Pick and Place Machine Samsung CP60 Pick and Plac...
Flason SMT Heller 1826 Mark 5 SMT Reflow Oven
Flason SMT Heller 1826 Mark 5 SMT Reflow Oven Reflow Oven SMT Reflow Oven Heller 1826 Mark...
PANASONIC MV2C SMT NOZZLE 1022478181
http://www.flason-smt.com/product/PANASONIC-MV2C-SMT-NOZZLE-1022478181.html PANASONIC MV2C SMT NOZZLE 1022478181 &...
Lead Free SMT Reflow Oven KTR 800
Lead Free SMT Reflow Oven KTR 800 8 heating zones 3 cooling zones Weight Approx:2400kg...
Heller 1707 Mark III SMT Reflow Oven
http://www.flason-smt.com/product/Heller-1707-Mark-III-SMT-Reflow-Oven.html Heller 1707 Mark III SMT Reflow Oven &...
I-Pulse Fv7100 customized Nozzle
http://www.flason-smt.com/product/I-Pulse-Fv7100-customized-Nozzle.html I-Pulse Fv7100 customized Nozzle SMT Nozzle ...
SMT Production Line Equipment Reflow Oven A8
SMT Production Line Equipment Reflow Oven A8 SMT Production Line Equipment Reflow Oven SMT Production Equipment Reflow Oven SMT Production...
Flason is high-tech enterprise focusing on SMT research and development,building new advanced solutions in SMT Assembly machines, like reflow oven, wave soldering machine, pick and place machine, AOI,SPI,PCB conveyor etc.
shenzhen, China
YAMAHA Second-Hand YV180XG Pick and Place Machine
YAMAHA Second-Hand YV180XG Pick and Place Machine Model YV180XG Panel size L Type: Max L380 x W330 mm ∼ Min L50 x W50 mm Panel th...
Various brands SMT Feeder Storage Cart From KINGSUN
Various brands SMT Feeder Storage Cart From KINGSUN More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com...
KSUN 6004-L Telescopic Gate Conveyor
product instruction ※ Easy to operate touch screen control interface ※Telescopic structure, width adjustable, easy to walk ※ Photoelectric sensors with protection, more secure ※ Smooth and paral...
KSUN 460Z Automatic Buffer
product instruction ※ PLC control system, Working is stably and reliably ※ Easy to operate touch screen control interface ※FIFO(first in first out), LIFO(last in first out) and pass through functi...
YAMAHA YG100R HIGH SPEED PICK AND PLACE MACHINE
YAMAHA YG100R HIGH SPEED PICK AND PLACE MACHINE Model YG100RA(FNC TYPE )/YG100RB(SF TYPE) Object substrate...
THK Grease AFE-CA From KINGSUN
THK Grease AFE-CA From KINGSUN More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com...
K-MC8835 lead-free fully computer controlled eight temperature zone hot air reflow soldering machine
Type no : K-MC8835 Heating parameters Number of heating zones:On 8 August Length of heating zone:2850mm Heating mode:Hot air Number of cooling zones :1 Send...
KSUN 350B stacking un loader
product instruction ※ Stable and reliable integrated control system ※ Easy to operate touch LED buttons or touch screen control interface ※Machine always fault monitoring ※ ...
YAMAHA YG200 Refurbished High Speed SMT Pick And Place Machine
YAMAHA YG200 is a high-speed SMD Surface Mounting machine, which has 4nos tables and totals 24 head nozzles, this machine mainly used for mount chip components, like 0201/0402/0603/0805/1206 or small QFN IC. “DONGGU...
Refurbished YAMAHA YV100xg Pick and Place Machine
Refurbished YAMAHA YV100xg Pick and Place Machine Machine Type YV100XG Substrate size M type L460 * W335 (MAX)...
KS8800 Eight Temperature Zone Reflow Oven
Standard : up 8 down 8 air furnace, patented hot air management system to make hot air convection more efficient heat capture faster; Dimension (L * W * H) 4800*1280*1420 Number of heating zones Up / Down 8 Number of cooling zo...
One stop solution and Full-auto SMT PCB Production Line - KINGSUN Customer
One stop solution and Full-auto SMT PCB Production Line - KINGSUN Customer...
MPM UP2000 HiE Screen Printer
MPM UP2000 HiE Screen Printer Substrate treatment ...
KSUN 460L Automatic Single Magazine Un loader
Model No: KSUN 460L Automatic Single Magazine Un loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A...
Refurbished Yamaha YV100 ll Pick and Place Machine
Refurbished Yamaha YV100 ll Pick and Place Machine Machine Type Automatic pick and place Brand Name Yamaha Machine Model...
KSUN R05 JUKI Feeder Calibration
KSUN R05 JUKI Feeder Calibration It is essential for this equipment that enhanced productivity , installation and quality improvement As the high efficiency vision camera is asked in order to investigate precisely and repair the er...
JUKI RS-1R Next Generation Smart Fast Modular Mounter
JUKI RS-1R Next Generation Smart Fast Modular Mounter JUKI RS-1R is one of the new models of the JUKI Pick and Place Pachine, JUKI RS-1R smart modular mounter SMT Placement, JUKI SMT mounter, JUKI chip shooter, JUKI Chip Mou...
Semi automatic solder machine (1.2M)
Technical parameter: Model 1200 Printing area...
Domestic 8DOB LED Multifunctional Placement Machine
Domestic 8DOB LED Multifunctional Placement Machine Features: >Equipped with the nozzle library exchange station, the size of the material can be mounted by a single machine. >Standard pallet material station, braided...
JUKI ORIGINAL USED RS-1R 12MM PICK AND PLACE FEEDER
JUKI ORIGINAL USED RS-1R 12MM PICK AND PLACE FEEDER More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com...
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
Dongguan, China
Consultant / Service Provider, Distributor, Equipment Dealer / Broker / Auctions, Manufacturer, Manufacturer's Representative
Precision Auger Pump
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with...
SMT Dispensing Pumps for Integration
Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified...
Benchtop / TableTop Dispensers - Island Series
Simplify Dispensing with GPD Global’s Island Series Dispense Platforms Island Series robots give you versatility to do simple, repetitive automation jobs. Work areas range from 300 mm x 400 mm to 400 mm x 400 mm. All Island Series...
High Precision Dispenser - MAX II (Heated Dispenser)
Precision Dispensing System for Heated Dispense Applications The GPD Global MAX II is a compact; high-accuracy system designed for today’s advanced heated dispensing applications. The frame is molded from “liquid rock&rd...
Precision Lead Former for Axial Components (CF-8)
Eliminate Body Stress with Versatile CF-8 GPD's CF-8 eliminates component body stress. Versatility is the key word for the CF-8. Simple tooling changes make short or long run production jobs quick and easy. Capabiliti...
Precision Lead Former for Taped RADIAL Components (CF-9)
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutt...
Time Pressure Liquid Dispensing Pump with Foot Switch or Dry Contact
Time Pressure Liquid Dispensing Pump with Foot switch / Dry contact A great addition to Fully Automatic Dispensing System Time pressure is a versatile method of dispensing that functions across a wide range of...
Lead Former for Bulk or Loose RADIAL Components (CF-10)
Form & Cut 2-, 3-, 4-, 5-, and 7-leaded Radial Components Capable of forming loose radial components at rates up to 5,000 parts per hour with a variable speed motor. Feed components by hand or with tubes (TO-220s)...
Peel Back Force Tester (PBFT)
Proven Peel Back Force Measurement Supplying consistent SMT carrier packaging is critical for customers using SMT pick-and-place machines. Nothing will stop a production line faster than carrier cover tape that doesn’t peel back pr...
Real Time Process Control for Uniform Fluid Dispensing
Real Time Process Control with FPC: Fluid Pressure Control (Patented) Runs your pump at optimal levels at all times instead of starving or drowning it with inadequate...
Volumetric Pump - PCD
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity pri...
Jetting Pump - NCM5000
Jetting Simplified Jetting pumps are excellent for dispensing small volumes of fluid at high rates of speed. The NCM5000 simplifies jetting to its basic elements - this means easy set up, cleaning, and maintenance for you. The drive syst...
Selective Conformal Coating Systems - Tilt and Rotate
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $4...
Benchtop Dispense Robots
Full-featured and compact benchtop dispense system robot offering accurate and repeatable dispense results! A benchtop dispense system does not mean "no features". The Catalina benchtop dispense system is a ful...
Large / Versatile Board Processing - DS Series Dispenser
When Applications Require Large Board Processing &/or Versatility The DS Series of dispensers is a robust, large format platform designed to handle all types of applications with ease. Ideal for dispense applications utilizing adhesi...
High Precision Dispenser - MAX Series (Non-Heated)
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulat...
A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.
Grand Junction, Colorado, USA
Custom Engineered SMT Nozzles & Tooling
Effective Solutions for any Odd-Form Application on any OEM Platform. Count On Tools has the experience and manufacturing flexibility to be able to develop custom engineered solutions to satisfy your individual Proc...
ASM/Siemens Siplace Ceramic Nozzles
These new ceramic versions are available in the 901, 902, 904, 906, & 925 versions. Special vacuum geometry provides excellent performance in the machine which saves you time and money during production. The machined bodies are flexible, so...
ezCLIP Universal Stop Clip for PCB Magazine Racks
Introducing the ezCLIP universal stop clip for PCB magazine racks. The ezCLIP system was created to allow electronics manufacturers who manually load/unload PCB magazine racks a simple way to distinguish required spacing between boards and to p...
Panasonic SMT Nozzles, Tooling, & Consumables (CM402, CM602, NPM, MSF, BM, HT, MSR, MV, & more!)
We offer a wide selection of the PanasonicSMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high qualit...
Assembleon SMT Nozzles, Tooling, & Consumables (Emerald, Opal, Topax, Saphire, MC, MG, & more)
We offer a wide selection of the Assembleon SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high qual...
Juki SMT Nozzles, Tooling, & Consumables (KE, FX, JX, RX, & more)
We offer a wide selection of the Juki SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality, l...
Custom LED Nozzles & Pick Up Tools
Count On Tools specializes in custom engineered nozzles for all types of LEDs (Cree, Luxeon, Phillips, NIchia, Osram, etc). Recent growth in LED technology and solid state lighting has provided the electronics manufa...
Samsung SMT Nozzles, Tooling, & Consumables (CP40, CP45, CP60, SM, & more)
We offer a wide selection of the Samsung SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality...
Mycronic / Mydata Feeder Repair Service
Count On Tools now offers repair services for MYDATA Agilis Feeders. This program will be available for the 3.7, 4.0, 4.7, and 5.4 Agilis feeders. This is the only repair option for these feeders on the market and provides significant costs sav...
StripFeeders Adjustable Feeder System
Why purchase expensive feeders for each component when you only need to place a few at a time? Count On Tools Inc. (COT), a leading provider of precision components and SMT spare parts, introduces the revolutiona...
QWIKTRAY Custom Matrix Trays for Electronic Components
Do you have a unique component that isn’t available in tape and reel? Tired of hand placing those components because you don’t have a compatible feeder? Can’t find J...
ezLOAD PCB Support System
Board Handling - Pallets, Carriers, Fixtures
Count On Tools Inc., a leading provider of precision components and SMT spare parts, introduces the new ezLOAD PCB Support System. With the recent increase of densely populated double-sided circuit boards, COT recognized the need for more affordab...
Hitachi SMT Nozzles, Tooling, & Consumables (Sigma, GXH, & more)
We offer a wide selection of the Hitachi SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality...
Mycronic Mydata SMT Nozzles, Tooling, & Consumables (Midas & Hydra)
The new series of Mydata replacement nozzles, for both the Midas and Hydra mountheads, are the only direct replacement for OEM nozzles on the market. We also offer custom engineering to standar...
Ipulse SMT Nozzles, Tooling, & Consumables (M1, M2, M4, M6, M7, M8, & more)
We offer a wide selection of the IpulseSMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...
Mirae SMT Nozzles, Tooling, & Consumables
We offer a wide selection of the Mirae SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...
Universal SMT Nozzles, Tooling, & Consumables
We offer a wide selection of the Universal SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quali...
Fuji Nozzles (NXT, XP, CP-6, CP-7, QP3, IP3, & more)
We offer a wide selection of the Fuji SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufactu...
Yamaha SMT Nozzles, Tooling, & Consumables (YV, YG, YS, & more)
We offer a wide selection of the Yamaha SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...
Quad / PPM SMT Nozzles, Tooling, & Consumables
We offer a wide selection of the Quad/PPM SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high qualit...
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
Gainesville, Georgia, USA
SMT 松下/西门子/三星/FUJI/YAMAHA/JUKI/机器销售维修
According to the customer's requirements, there are slow and fast modes of transportation, and the quotation does not include shipping fees, which are free of charge in China.(运输方式按照客户的要求,有慢的,也有快的,报价不包含运费,国内免运费。)...
我们是一家来自中国的SMT供应商。我们长期供应SMT设备供料器及设备配件,包括松下、三星、雅马哈、富士、西门子、JUKI等。我们供应SMT吸嘴、SMT供料器、SMT机器。
Suzhou, Jiangsu, China
1826MK5 - 适用于高产能的回流焊炉
世界一流的回流焊炉 为高产能需求,最小化保养所需时间及最小占地面积提供稳定的性能 无铅保证 免保养 最低的耗氮与耗电 免费的一体化 CPK 软件 随着最新的技术突破,HE...
1936/2043 Mark 5 – 回流焊系统
以高达1.4米/分钟的高链速为适应极限贴片速度提供了高产能需求解决方案。 无铅保证 免保养 最低的耗氮与耗电 免费的一体化 CPK 软件 1936与2043 MK5系列向人们展现了最高水平的炉温均温再现性。与Mar...
1936 MKV - 蚁酸回流焊炉
甲酸蒸气中无助焊剂的甲酸回流炉 Heller设计并制造了可用于甲酸蒸汽水平式无助焊剂甲酸回流焊炉。这款新烤箱的设计符合Semi S2 / S8安全标准(包括有毒气体)。 已证明甲酸是无助焊剂回流中的有效还原剂 卧式回流炉中的优异结果证明晶圆凸块应用...
回流焊炉-Mark 7
适用于高产能的世界一流的SMT 回流焊炉 MK7系列具有多项革命性和突破性的设计。MK7系列结合客户需求,优化DELTA T,减少耗氮量,延长保养间隔时间。汇集各项优化功能的同时降低了机身高度,使视野更开阔。 HELLER欢迎您参观我们的研发中心和制造工厂,亲自在MK7的设备上做PROFILE测试,共同见证MK7系列的强大功能及优势。或者将您的产品寄给我们,我们会将PROFILE 的测试结果与您...
Heller 788在线、连续、垂直炉烤箱
Heller提供垂直炉烤箱用以提高生产效率、质量及降低成本的解决方案 这种升降模式的固化炉利用了垂直空间,适用于固化应用,最多可达4小时的固化时间,而占地仅有96“(2.5m) 的面积。极适用于填充和封装制成。 在线式垂直炉在固化树酯的制程中有显著的三大领域...
860压力固化烤箱(PCO)
压力固化烤箱(PCO)或高压容器用于使空隙最小化并增加通常用于贴装附着和底部填充应用中的粘合工艺的粘合强度。 PCO将空气加压到刚性容器中,并通过强制对流加热和冷却。 加热器,热交换器和鼓风机位于压力容器内部。 固化过程完成后,压力固化炉会自动将压力降低到1atm并冷却。...
Heller 755在线连续式的垂直烘烤炉
小型化的垂直烘烤炉 Heller提供垂直炉烤箱用以提高生产效率、质量及降低成本的解决方案 在线式垂直炉在固化树酯的制程中有显著的三大领域 减少人员在生产过程中的上料及下料的时间浪费以提高生产效率 减少烤箱在开关门时所产生的温度...
1809 MK5-Heller先进联机无气泡/真空回流焊炉
均衡气流技术的无气泡/真空回流焊氮气系统 9个顶部和底部加热区-业内每英尺拥有最高的区域数! 100英寸加热长度-可提供超大产量! 2个内部冷却区-提供最低的出口温度! 总长度为180英寸-优化占地面积! 带有10英寸模块的新型模块设计...
1910MK5- 双腔4条轨道SMT 回流焊炉
双轨及双温度回流焊炉 双炉膛模组:双炉膛+双腔吹风马达+双腔加热模组+双腔独立温度测量监测 分岔功能 双炉膛模组 双轨 双导轨和双中央支撑系统...
Mirrors, Brushes, Spring Hooks, Lead Cleaners
The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budgetary requirement of modern manufacturing. E...
Stainless Steel Brush (3 1/2") SH-61
Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from solder pad and for general cleaning purposes. Available in Standard and Miniature sizes. Stainless Steel Brush (3 1/2&...
Standard Straight Flat Reamer/Straight Fork Tip (SH-20A) (8")
Standard Flat Reamer/Straight Fork Tip (SH-20A) (8") Description: Straight Flat Reamer...
Orange Sticks SH-83
Orange Sticks with double beveled ends, 7" x 5/32" (SH-83) The Beau Tech orange sticks are made of high quality non-resin wood which will not contaminate solder and component leads. Natural wood is among...
Flat Shockproof Vulcan Spudger, (SH-80) Double Beveled and Conical Ends. (6" x 1/4")
Flat Shockproof Vulcan Spudger SH-80 Double Beveled and Conical Ends. (6" x 1/4") The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, ele...
Probes
These Made in America, Beau Tech RocHard MilProbes are the only complete line of probes available to meet the full spectrum of circuit repair, rework, and assembly needs from Through Hole to 2 mil pitch Surface Mount....
Miniature Straight Flat Reamer/Straight Fork Tip (SH-20C) (5 1/2")
Standard Flat Reamer/Straight Fork Tip (SH-20A) (5 1/2") Description: Straight Flat Reamer...
Miniature Angled Flat Reamer/Straight Fork Tip SH-20D (5 1/2")
Angled Flat Reamer Miniature (left) & Standard (right)...
Inspection Mirror
Inspection Mirror (SH-133S) The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budg...
Round Vulcan Shockproof Spudger, (SH-81) Screwdriver and Conical Ends. (5 1/2" x 5/16")
The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards. Beau Tech spudgers have many advantages compared with...
Soldering Rework Tools
The tool ends are made of high quality Swedish Hardened Tool Steel, carefully heat treated and tempered to provide a tough, long lasting working edge that resists wear....
Pull Version Spring Hook SH-152 (9 3/4")
Use these convenient tools to insert, remove, and adjust fine springs and other small parts in hard to reach places. Made of quality polished tool steel and hardened to withstand high tension without breaking or bending. The fine diamond knurled hand...
ESD Safe Probes
The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards....
Push Version Spring Hook SH-150 (9 3/4")
Use these convenient tools to insert, remove, and adjust fine springs and other small parts in hard to reach places. Made of quality polished tool steel and hardened to withstand high tension without breaking or bending. The fine diamond knurled hand...
NASA Style Lead Cleaner SH-66 Lead Cleaner
Use this quality tool to remove oxides, scale, grease and dirt from leads. The tinned copper braided shielding, backed by a stainless steel spring, ensures a fast and easy job. The lead cleaner meets NASA specification NP-200-4 and ensures the best w...
Stainless Steel Brush (2 5/16") SH-60
Stainless Steel Brush (SH-60) 2 5/16" Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from sold...
A US manufacturer of quality hand tools for those engaged in the repair, rework, R & D, testing, and assembly of electronic components and printed circuit boards from Through Hole to 2Mil Pitch Surface Mount.
Portland, Maine, USA
BOM Builder Service
Our BOM Builder service is a complimentary part building service that really can shave days off every PCB design! By taking advantage of this anytime (24/7) service, you no longer need to waste time to search online for library data, or wo...
PCB Footprint Expert - Tens of Millions of Parts; 25 CAD Formats!
The PCB Footprint Expert is a powerful CAD library development tool powered by our own proprietary CAD LEAP Technology (Libraries Enhanced with Automated Preferences). It is packed with very powerful advanced library management fe...
PCB Libraries' "Footprint Expert" suite uses CAD LEAP(tm) Technology to greatly simplify footprint and 3D STEP model creation; it is used by tens of thousands of PCB designers and engineers all over the world.
Peoria, Arizona, USA
Consultant / Service Provider, Media / Publisher / Online Resource, Other
PROMATION Conveyors: "The Best Conveyors on the Planet"
PROMATION Board Handling/Conveyors: "The Best Conveyors on the Planet"...
ASSCON Vapor Phase Soldering
ASSCON Vapor Phase Soldering: ASSCON VP2100 Vacuum, ASSCON VP800 Vacuum, ASSCON VP6000 Vacuum & ASSCON VP7000 Vacuum...
MP elektronik Dry Cabinets
MP elektronik Dry Cabinets Check here https://atekllc.com/product-category/dry-storage-cabinents/...
GETECH Depaneling & Label Marking
GETECH Depaneling & Label Marking Stand Alone or Inline - check website for many options https://atekllc.com/product-category/automation-depaneling/...
ASC International SPI or AOI (Oldest SPI Company)
AOI: VisionPro Falcon Plus (Inline), VisionPro Merlin Ultra (Batch). VisionPro Merlin (Batch) SPI/AOI Combo: LineMaster Fusion DMi (Batch) SPI: LineMaster Fusion 3D (Inline), VisionPro HSI (Batch)...
Mirtec SPI or AOI (Florida Customers Only)
Mirtec SPI or AOI (Florida Customers Only) 3D AOI: MV-3 OMNI, MV-6 OMNI, MV-7 OMNI & MV-9 OMNI 2D/3D AOI; MV-3 & MV-6e 3D SPI: MS-11e, MS-11 & MS-15...
kolb Cleaning Technology
Product cleaning in electronics production Product cleaning is the cleaning of highly sensitive components and is an integrated part of the value-added chain. This includes the cleaning of assembled PCBs, hybrids, DCBs, and mispr...
Parker SMT - Your #1 Worldwide Supplier for Used Equipment for PCBA. Buying and Selling your SMT or ICT equipment.
Tampa, Florida, USA
Golden State Assembly - Wire Harnesses & Electromechanical Assemblies
Wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.), services (sorting, rework, value additive wire harness manufacturing engineering). Golden State Assembly is currently on the lookout...
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
Morgan Hill, California, USA
tray feeder
ASCEN tray feeder offers efficient and productive feeding for components in trays. ASCEN technology co.,ltd provide a full SMT automated assembly equipment,solutions, As part of that...
SMT part tube feeder
ASCEN SMT part tube feeder is a SMT DIP part feeding machine, It can use to SMT mounter for automated online feeding or connect the robot for automatic production for replace the artificial....
PCB belt conveyor for inspection
PCB belt conveyor and PCB inspection conveyor 1000mm length transfer conveyors are used for equipment linking, visual inspection, manual assembly, and PCB buffering functions. Their advantage is the short length, which allows them to be plac...
disposable face mask welding Machine
The Automatic disposable face mask welding Machine use the imported transducer which with stable output performance,and quality spares, smart design which makes the operation much more convenient,Mainly used to the ear-loop welding...
loose component axial lead former
ASCEN ASL-809FK model with the loose part feeder to cut,bend and form with dies. This loose component axial lead former use for cutting,bend and forming taped axial components and loose axial...
Multi magazine PCB loader
Multi magazine PCB loader as SMT line automatic magazine loader machine that feeds PCBs into the Process Line from Stacks or Magazines. Description: 1) Machine Size(L*W*H...
multi cutter depaneling/multi PCB depaneling/multi v-cut depanelizer/PCB Depanelers/auto PCB cutter
ASCEN technology specializing the PCB assembly equipment and the SMT solution. Please check the more detail link : www.pcb-separator.com Any inquiry please sent the email...
tape component form feeder
ASCEN tape component form feeder can as SMT insertion component feeder use to connect the SMT component insertion machine for automated pick up,also can as the taped component feeder to hold the component for robot...
PCB cutting machine|auto PCB depaneling machine
PCB separator adopts the latest blade-type light weight design, which completes the micro-shear stress cutting stroke at one time, and is suitable for separating PCB circuit boards with V-grooves.&...
PCB tiered stacking unloader
PCB tiered stacking unloader and PCB destacker is transfering on the electronic assembly line. it can continuously jacking up the PCB board from the belt conveyor one by one and finish unloading operation....
PCB loader machine
PCB loader machine is used at the starting of the SMT production line for loading of PCBA to the line Description: 1) Machine Size(L*W*H):1700*780*1200...
Face Mask Spot Welding Machine
This automatic welding welding machine is to put 3-7 mm wide elastic belt on the both sides of the face mask blank by the ultrasonic welding.Only 1 operator is needed to put the face mask blank on the moving belt one by one and the...
PCB turn conveyor
The slide and PCB turn conveyor module is designed to accept a PCB and route as a "pass through" or "rotate and off-load" at 90 degrees. If you want know more solut...
manual PCB vision measurine machine
Manual vision measuring machine suitable for measuring applications of multi-variety, complex dimensions and demanding measuring accuracy , This vision measuring instrument can be applied to a variety of m...
SMT inspection conveyor
The SMT inspection conveyor is used in the PCB assembly line when frequent visual inspection of PCB's is required.and can be used as an Inspection conveyor or a Linking conveyor....
AOI reject conveyor
AOI reject conveyor from ASCEN allows PCB printed circuit board manufacturers to easilly isolate bad or reject boards from SMT production line,PCB board rejection is based on up-line process input, typically provided by Automated Optica...
PCB depaneling equipment
PCB depaneling equipment adopts the latest blade-type light weight design, which completes the micro-shear stress cutting stroke at one time, and is suitable for separating PCB circuit boards with V-grooves....
automatic SMT pcb unloader for SMT manufacturing from ASCEN technology
automatic SMT pcb unloader unloads the SMT production line automatically by pushing PCBA out of a magazine onto the conveyor of the down-stream machine. ASCEN technology co.,ltd is prom...
PCB separator|manual pcb cutting machine
Hand push type PCB cutting machine applicable for any PCB printed circuit board with V-Cut, PCB cutting machine works under compressed air with V-cut tool to fulfill even-board and sub-board operations...
shuttle conveyor
shuttle conveyor is used to connect dual lane with single lane equipment in the production line, and also can be used as a fixed rail changer for the PCB intelligent assembly line. If you want kn...
Manufacturer of automated production systems;PCB magazine loader,PCB separator,PCB cutting machine,PCB unloaders, PCB conveyors,PCB depaneling machines,PCB turn conveyors,PCB conformal coaters,PCB solder paste printer,PCB buffer
Dongguan, Guangdong, China
Siemens Feeder storage cart smt trolley for siemens X series feeder
Siemens Feeder storage cart smt trolley for siemens X series feeder Description: 1.Suitable for SMT workshop feeder placed, prepare feeder materials ahead of time, improve production efficiency. 2.Stainless steel welding wh...
Samsung feeder 8*2mm for CP45
Samsung feeder 8*2mm for CP45 CP40/ CP45FV NEO 8*2mm feeder Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysmt Website: www.smt-cn.co...
Juki CF8*2MM FEEDER
We have full range of JUKI feeder in ready stock for immediately sale. All model(ATF,CF,FF,NF) and size(8mm~88mm) are available. AF05HP AF12FS AF16FS AF24FS...
SMT Samsung CP feeder 32mm non-stop type NF for pick and place machine
SMT Samsung CP feeder 32mm non-stop type NF for pick and place machine Samsung SM/CP40 CP45 Feeders models: SAMSUNG SM 8*2mm FEEDER SAMSUNG SM 8*4mm FEEDER SAMSUNG SM 12mm FEEDER SAMSUNG SM 16mm FEEDER...
Fuji SPLICE FEEDER of XP142/XP143
Fuji SPLICE FEEDER of XP142/XP143 XP142, XP143 non-stop splicing tape feeder 8 * 2, 8 * 2 tape, tape 8 * 4, 8 * 4 Tape FUJI GXD0560 BOLT FUJI GXD0570 JOINT FUJI GXD0580 SLIDE FUJI GXD0660 BLOCK...
Smt Hitachi nozzles sigma-G4 Sigma-G5 nozzles used in pick and place machine
Smt Hitachi nozzles sigma-G4 Sigma-G5 nozzles used in pick and place machine Hitachi GXH-1, GXH-3 Nozzles Part Number Description 630 128 4842 (#101) &n...
JUKI NF 8*4MM ORIGINAL USED FEEDER
JUKI NF 8*4MM ORIGINAL USED FEEDER OFFER JUKI NF feeders: JUKI NF8*2MM NF8*4MM NF12MM NF16MM NF24MM NF32MM NF44MM NF56MM FEEDER(original used ). Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn...
Panasonic CM402/602 original feeder
panasonic CM402/602 feeder Description CM402/602 feeder 8mm dbl with sensor used CM402/602 feeder 8mm dbl with sensor new new CM402/602 feeder 12/16mm with sensor new CM402/602 feeder 24/32mm with sens...
Yamaha nozzle 71A
Yamaha nozzle 71A M/P: +86 15323874439 becky(at)hysmt(dot)cn beckysusmt(at)hotmail(dot)com Skype: beckysmt www(dot)smt-cn(dot)com...
Panasonic feeder 44/56mm KXFW1KS8A00 with sensor
Panasonic feeder 44/56mm KXFW1KS8A00 with sensor Dear Customer, Good day. We have 50+ Panasonic feeder 44/56mm KXFW1KS8A00 with sensor in stock, all of them are original brand new, if you have any requirement,&nb...
SAMSUNG CP40 Z Axis Holder SMT shaft
SAMSUNG CP40 Z Axis Holder SMT shaft Samsung holder shaft: J7055542A SHAFT J90551171A SHAFT CP45 SHAFT J9058090A FILTER HOLDER J81001856A FILTER HOLDER JM-SAM-11 FILTER HOLDER VFU2-44 FILT...
Fuji W32 Motor feeder
Feature : Made by FUJI Machine MFG. Part Name: Motor Feeder W32 32mm FMB-32E-380. Part Number: AKDFA-6100 KDE-3200. For FUJI IP1 IP2 IP3 QP242E QP3 XP2 Electronics Assembly Equipment. Brand : FUJI Unit : PC(...
Smt I-pulse K01 nozzle used in pick and place machine
Smt I-pulse K01 nozzle used in pick and place machine Smt I-pulse K01 nozzle used in pick and place machine I-pulse series nozzles: 1.M1/M4 type:M001/M002/M003/M004/M005/M006/M012/M013/M017/M018/M019/M020/M021/M022/M031/...
Samsung Holder SM431 Z Axis shaft
Samsung Holder SM431 Z Axis shaft...
Juki intelligent feeder calibration jig
Juki intelligent feeder calibration jig This product adopts CCD with high times magnifier, through a MONITOR observation into components situation, Lever needle up and down work conditions, the LEVER fray, decrease FEEDER false and the c...
Juki ATF feeder
Juki ATF feeder Specs: AF05HP AF12FS AF16FS AF24FS AF081E AF081P CF03HP...
SMT SAMSUNG Feeder NA118201 CP45 FV0603 2MM Feeder for pick and place machine
SMT SAMSUNG Feeder NA118201 CP45 FV0603 2MM Feeder for pick and place machine Samsung SM/CP40 CP45 Feeders models: SAMSUNG SM 8*2mm FEEDER SAMSUNG SM 8*4mm FEEDER SAMSUNG SM 12mm FEEDER SAMSUNG SM 16mm FEEDER...
Samsung CP20 CP40 CP45 CP60 32MM feeder
Samsung CP20 CP40 CP45 CP60 32MM feeder Dear Customer, Thanks for your attention. We have 50+ Samsung CP20 CP40 CP45 CP60 32MM original used & working well feeder in stock, if you have any interest, feel free to c...
Samsung Feeder Cart smt storage feeder trolley for samsung SM series feeder
Samsung Feeder Cart smt storage feeder trolley for samsung SM series feeder Description: 1.Suitable for SMT workshop feeder placed, prepare feeder materials ahead of time, improve production efficiency. 2.Stainless steel we...
ZK Electronic Technology Co., Limited
ZK Electronic Technology Co., Limited professional in Surface-Mount Technology area and supports most major brands of electronic asembly equipments with a large selections of compatible SMT.
Shenzhen, China
Consultant / Service Provider, Distributor, Equipment Dealer / Broker / Auctions, Manufacturer
SMT Pick and Place Nozzles
High quality SMT nozzles, cutters, filters, etc. Featured Items: Siemens Nozzles Siemens Nozzle Type 911 Siemens Nozzle Type 914 Nozzle Ty...
SIEMENS/ASM SPARE PART
P/N Description 00047012-01 Cover cap CV-PK-4-B PUR...
SMT Consumables
Featured Items: Single 8mm tape Abrasive Block for Feeder Table Double side tape (8mm) SMT magazine rack Siemens Valve Plunger SP6 DST-8MM-00 (4)spli...
Siemens Spare Parts
Siemens machine feeders and spare parts. Featured items: Siemens feeder module 12/16mm Siemens feeder module 24/32mm Siemens feeder mod. 44mm Siemens f...
We offer various kinds of high quality SMT nozzles, feeders, cutters, filters, etc. Sales1@kundasmt.com
Suzhou, Jiangsu, China
MVME167PA-36SE
High-performance SBC Refurbished – Good Condition Manufacturer – Motorola 133 MHz MC68040 32-bit microprocessor with 8KB of cache, MMU, and FPU Full 32-bit master/slave VMEbus inter...
MVME167PA-34SE
High-performance SBC Refurbished – Good Condition Manufacturer – Motorola 133 MHz MC68040 32-bit microprocessor with 8KB of cache, MMU, and FPU Full 32-bit master/slave VMEbus inter...
MVME55006E-0163
MVME5500 Single-Board Computer Refurbished – Good Condition Manufacturer: Emerson MPC7457 PowerPC® processor at 1 GHz 512KB of on-chip L2 cache and 2MB of L3 cache AltiVec coprocessor fo...
MVME51105E-2263
VME Processor Module Refurbished – Good Condition Manufacturer: Motorola Model: MVME 5100 Microprocessor: MPC7410, MPC750 or MPC755 with 32KB/32KB L1 cache DRAM: Up to 512MB of onboard ECC S...
We are your obsolete industrial product specialists. Our inventory includes VME, cPCI, ATCA, SBCs and much more industrial electronics
Hackettstown, New Jersey, USA
KXFOE1LXAOO CM402
KXFOE1LXAOO CM402 if you have interested,please contact us. thanks zoey@jinchensmt.com...
Automatic L PCB Magazine Unloader UL-M-BL With Standard SMEMA Communication Interface
Automatic L Unloader UL-M-BL 1. The main body is made of sheet metal bending welding, Magazine into and out of the use of special aluminum profile. 2. Stable casting platform structure design, improv...
YAMAHA JUKI Samsung I-pulse siemens Smt Stick Feeder
We Sell Smt Stick Feeder YAMAHA Stick Feeder JUKI Stick Feeder Samsung Stick Feeder I-pulse Stick Feeder siemens Stick Feeder, If you have interest please contact us,Thanks zoey...
Automatic Clean Lead Free Solder Paste Heater
SMT Production Line Usage Automatic No Clean Lead Free Solder Paste Heater Type: Thawing machine Power Source: Electric Dimension(L*W*H): L500 x W300cm x H230mm Weight: 15KG ...
PCB Magazine Unloader Destacker With LED Three Color Work Indicator
Automatic Unloader & Destacker 1. Mitsubishi PLC control system 2. LED three-color work indicator, man-machine touch screen operation interface. 3. Pass through function. 4. C...
Panasonic KME CM402/602 machines feeder, MSF,HT,BM machines feeder
Panasonic KME CM402/602 machines feeder, MSF,HT,BM machines feeder 8mm Tape Feeder KXFW1KS5A00 with sensor 8mm TapeFeeder KXFW1KSBA00 without sensor, 12/16mm Tape Feeder KXFW1KS6A00 with sensor, 24/32mm Tap...
SMT Nozzle Cleaning Drying Machine
Parameters of machine: Size: (L*W*H) 520mm × 450mm× 620mm Power(three phase two wire ) 2P2W,220VAC ,50/60Hz...
4 PITCH PCB Magazine Unloader Humanization Design , Special Aluminum Alloy Mechanism
Full Automatic Unloader 1. Special aluminum alloy mechanism, more clearly understand MAGAZINE operation state. 2. Stable casting platform structure design, improve the stability of the equipment....
SMT PCB Handling Equipment , Pcb Loader Unloader For Circuit
ML Automatic Unloader Advantage 1. Mitsubishi(Panasonic) PLC control system 2. LED three-color work indicator, man-machine touch screen operation interface. 3. Pa...
NG&OK PCB Magazine Unloader NL-M-TN With Panasonic PLC Control
Automatic NG&OK Unloader NL-M-TN 1. Structure: special aluminum alloy sheet metal combination 2. Operation: Weilun Tongtai man-machine operation key surface. 3. The control system: Pana...
Samsung hanwha SM471 machine
Samsung hanwha SM471 machine Any interest,please ask me zoey@jinchensmt.com...
JUKI AF/CF/FF/CF/CN ect JUKI feeders
We have original new and original used, copy new JUKI machine feeder ,If you have interest,you can contact us thanks zoey@jinchensmt.com AQ02HP Feeder 0402 8mm CF03HP Feeder 0603 8mm...
Samsung hanwha SM481 machine
Samsung hanwha SM481 machine Any interest,please ask me zoey@jinchensmt.com...
I-Pulse Feeder F1 and PS type Feeder
We support I-Pulse Feeder, F1 and PS type Feeder, If you have interesting, Please feel free to contact us, thanks zoey@jinchensmt.com I-Pulse Feeder F1-82-1005 Feeder LG4-M2A00-00 I-Pulse Feeder F1-84 0402 Feeder...
Unloader Automatic Unloader DL-M-TN For PCB Assembly Line
Automatic Double Track Unloader DL-M-TN 1. PLC control system 2. Special aluminum alloy plus sheet metal combination, a better understanding of MAGAZINE operating status. 3. Double entry ra...
SMT Solder Paste Mixer
Input voltage 220V Work ability At the same time 1 bottle or 2 bottles of mixed soider paste...
Samsung Smt Feeder CP and SM type
We have Samsung CP and SM Machine Smt feeder(original new ,original used and copy ne),If you have interest please contact us,Thanks Samsung CP 8*2mm Feeder Samsung CP 8*4mm Feeder Samsung CP 12mm Feeder...
Samsung hanwha SM482 machine
Samsung hanwha SM482 machine Any interest,please ask me zoey@jinchensmt.com...
Samsung Hanwha SME 8mm Electric Feeder for SM481 SM482 Machine
Samsung SME Feeder is used for Samsung SMT pick and place machines, including SM471, SM481, SM482, SM471Plus, SM481Plus, SM482Plus, DECAN S2/F2/L2, EXCEN PRO and so on.. Samsung SME series of original new / original u...
Siemens Feeder
We have many Siemens feeder in stocks,Original used,If you have interest,you can contact us,Thanks zoey@jinchensmt.com Skype:zoeysmt Siemens 00141098 3*8 FEEDER Siemens 00141098 3*8 FEEDER Siemens 00141099...
Jinchen Electric Technology Co,.Ltd
We are please to introduce ourself- ,who is one of the SMT solution provider for Global customers, we can supply Automatic Insertion machines spare parts, SMT spare parts, (including feeder ,Nozzle,PCB
Dongguan, Guangdong, China
FKN Systek N115 Nibbler
Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N115 Nibbler from FKN Systek. Two sharp support blades on either side of the tab help cleanly slice the PCBs from the tabs. The bl...
FKN Systek K3000 - Manual Circular-Linear Blade PCB Depanelizer
FKN Systek K3000 - Singulate scored and skip scored panels up to 24" long ESD protective mat on back table Adjustable front and back support table Singulate panels with components up to 2.5" high...
N100 - PCB Nibbler
Singulate Straight Tab Routed Panels Store cut tabs inside tool for discarding at operator convenience Available with 3 blade types and choice of support dies Clean cut - requires no rework...
FKN Systek S200 Automatic Single Line Depaneling Saw
The FKN Systek S200 is a semiautomatic diamond blade depaneling saw which will cut a populated PCB panel one line at a time. The operator places the panel onto the input tray and positions the cutting line over the blade travel path...
FKN Systek K5000 - Multiple Blade Circular Blade PCB Depanelizer
FKN Systek K5000 - Manual board feed PCB multiple panel singulation Singulate panels with up to 10 scorelines. Singulate panels with components up to 2.5" 3 models available: - Output tray...
F9000 Modular PCB Carrier Magazine
The basic unit for these PCB racks holds 32 boards up to 6.7" (170mm) long. Modules can be assembled side by side to hold longer Printed Circuit Cards. Standard extrusions allow card width of 0 to 10.25". For wider cards, extrusions can...
S300 - Multiple Blade PLC Controlled PCB Depaneling Saw
Cut panels without scoreline and with overhanging components. The S300 diamond blade depaneling saw is ideal for use in singulating assembled PCBs. Singulate panels up to 12" wide. Mic...
F9004 - Side by side PCB transport racks hold up to 100 PCBs
Side by side stackable PCB transport racks for up to 100 printed circuit cards of up to 7.4" (190 mm) deep are made of antistatic material. Side plates can be adjusted from .7" (20mm) to 9.8" (250 mm). Specifications:...
TDK PCB Transport Racks
Low Cost PCB Transport Racks for up to 50 Printed Circuit Cards of up to 18" (460 mm) deep are made of antistatic material. Side plates can be adjusted from 5.9" (150mm) to 13" (330 mm).Use in TKD Inserter. Specifications:...
R100 Benchtop PCB Depaneling Router
Safely Singulate Tab Routed Panels - With Dust Extraction Finish routing a tab routed PCB for singulation is a relatively slow process . However, in some cases, where the board contours and sensitive or overhanging components may requi...
FKN Systek K7000 - Thin Blade Circular-Linear Blade PCB Depanelizer
FKN Systek K7000 - Compact PCB Singulator for Close Component Spacing K7000 Singulates panels with components up to .030" apart. Blades Made of Long Lasting High Speed Steel. Linear Blade 12...
K4000 L36
The K4000L36 is a motorized linear blade depanelizer to singulate V-Scored PCBs. The K4000 is available in versions able to singulate 18", 24" 36" and 48 " panels. The K4000 L18 and...
F9001 Quick Adjust Rack holds up to 50 PCBs
The F9001 quick adjust PCB Rack has been developed to provide a reasonably priced easy to adjust pcb carrier as an alternative to existing high priced products. The width of the rack can be quickly adjusted for different...
F9005 - Low Cost Flat PCB Holding Tray
Flat PCB holding trays are designed to hold up to 25 PCBs for storage and transport at manual workstations. These trays will hold virtually any PCB size. As with all transport racks, these are made of antistatic material. Specifications:...
N400 - Singulate Tab Routed Panels In One Operation
For faster singulation of odd shaped tab routed panels we have developed the N400. This machine uses national brand Die sets with FKN custom tooling to singulate one panel at a time, or to singulate an entire matrix in one operation...
C200 Pneumatic Crimp Tool
Cable & Wire Harness Equipment
Low Cost Table Top Crimp Machine. The C 200 is a table top low cost crimp tool which takes a variety of dies from different manufacturers. Air operated using standard factory air (5 bar min), with a pressing capacity of up to 1,200 kp,...
F9055 - Transport Trolley Holds 200 to 400 Panels.
Made of anti electrostatic material, this PCB transport cart is sturdy and durable. The cart is good for moving large quantities of heavy boards. Specifications: Size: ( F9054 = 850x550 x1300 mm) - ( F9055 1200 mm x 550...
FKN Systek K6000 - Multiple Blade Circular Blade PCB Depanelizer
FKN Systek K6000 - Fully automated singulation of up to 10 panels. Singulate Panels with up to 10 Scorelines. Process PCBs with Components up to 2.5" High. Integrated Input and Output Conveyors....
99-0012 - Pin Grid Array Extractors
Pin Grid Array Extractors are available in two sizes and provide a quick and safe way to extract Pin Grid Array components from their sockets. All component sizes can be accommodated, as the tool is available in two or four grip models. Adjusting...
N200 - Depaneling Punch for Round Tab Routed Boards
Low Cost Punch For Singulation Small Tab Routed Panels N200 singulates one tab at a time with upper and lower pinch blades. Singulate curve routed and odd shaped boards. Top and bottom knif...
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
Millis, USA
Unisoft ProntoSELECTIVE-SOLDERING software
ProntoSELECTIVE-SOLDERING is used by electronic manufacturers to quickly program their Selective Soldering machines. ProntoSELECTIVE-SOLDERING helps program most popular Selective Soldering machines such...
Unisoft ProntoAOI - AOI Machines Programming Software
ProntoAOI is used by electronic manufacturers to quickly program their Automatic Optical Inspection (AOI) machines and X-RAY Equipment. ProntoAOI programs most popular AOI Equipment such as YESTech, Mirtec, Orbotech,...
Unisoft CELLS - Product Tracking MES Software
Affordable Manufacturing Execution System (MES), Shop Floor Automation and Integration Software CELLS WORKFLOW Product Tracking MES is an affordable full Manufacturing Process Control Software System providing Plant Intelligence fo...
Unisoft ProntoTEST-FIXTURE - ATE (Automatic Test Equipment) Software
ProntoTEST-FIXTURE used by electronics manufacturers will accurately setup your Automatic Test Equipment (ATE), Flying Probe and design your "bed of nails" test fixturing. In minutes Unisoft ProntoTEST-FIXT...
Unisoft ProntoVIEW-MARKUP - Assembly CAD Viewer & Gerber Viewer Software
ProntoVIEW-MARKUP is assembly CAD Viewer & Gerber Viewer software used by electronics manufacturers to quickly find components, pin, shorts between traces, etc. ProntoVIEW-MARKUP is also a redline tool that allows annotation of the as...
Unisoft ProntoPLACE
ProntoPLACE used by electronics manufacturers will quickly program your surface mount SMT and thru-hole assembly equipment. In minutes Unisoft ProntoPLACE software translates CAD or Gerber and Bill of Materials (BOM) file...
Unisoft ProntoGERBER CONNECTION - Gerber Translation Software
If you have only Gerber data files to work with then ProntoGERBER-CONNECTION can help you! ProntoGERBER-CONNECTION imports raw Gerber data and allows the user to add intelligent information to the shapes on th...
PCB Electronics Manufacturing Automation Software for EMS, OEM & ODM manufacturers. Over 3000 customers worldwide!
Milford, Connecticut, USA
YAMAHA YG200 Refurbished High Speed SMT Pick And Place Machine
YAMAHA YG200 Refurbished High Speed SMT Pick And Place Machine Applicable PCB L330×W250 mm to L50×W50 mm Through-put...
KINGSUN Automatic Loader and Unloader
KINGSUN Automatic Loader and Unloader Model 250 330 390 460 PCB loading time Approx 6 seconds...
DEK Horizon 03iX Automatic SMT Solder Paste Printer
DEK Horizon 03iX Automatic SMT Solder Paste Printer Model Horizon 03iX Operating System Win XP+09sp13 or up PCB support T...
JUKI KE2070L High Speed Chip Shooter SMT Machine
JUKI KE2070L High Speed Chip Shooter SMT Machine Board size M size (330×250mm)...
Vitronics MR 933 Lead free Reflow Oven
Vitronics MR 933 Lead free Reflow Oven “DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD” provides overall solutions for SMT equipment and 3C intelligent factories. Professional electron...
KINGSUN SMT Linking Conveyor
KINGSUN SMT Linking Conveyor Power supply 100-230V AC (customized), single phase Air pressure 4-6 bar Transpo...
Panasonic Refurbished CM402-L Modular Super High Speed SMT Machine
Panasonic Refurbished CM402-L Modular Super High Speed SMT Machine PCB dimensions (mm) L 50 x W...
Semi Auto PCB Solder Paste Printer
Semi Auto PCB Solder Paste Printer Model 500mm 800mm 1200mm 1500mm Direction Left → Right,...
Dongguan Kingsun Automation Technology CO., Ltd
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
Dongguan, Guangdong, China
IPC Certification
IPC - Association Connecting Electronics Industries® offers globally recognized industry-traceable training and certification programs on key Electronics Industry Standards. Blackfox, founded in 1996, is the premier Worldwide Approved IPC T...
PRO-STD-001 Certification
Course for Counterfeit Component Detection and Prevention Blackfox and ProSkill CTG offers a unique and comprehensive course; PRO-STD-001 Certification, a meaningful Course for Counterfeit Component Detection and Prevention. Have your...
Hand Soldering Training
The purpose of these courses is to promote best manufacturing practices and enhance the individual’s job performance. These courses are indispensable for everyone involved in Electronics Manufacturing. Blackfox is widely recognized in the...
Lead-Free Solder Training
Blackfox’s Lead Free Soldering series minimizes the risks of conversion, and gives you the confidence to introduce lead free products and services quickly, with highest quality. The lead free certification program offers the latest requireme...
Blackfox Training Institute, LLC
Blackfox is the industry leader in providing IPC Certifications, Solder Training, Customized Training Programs, and Counterfeit Component Training and Certification.
Longmont, Colorado, USA
Consultant / Service Provider, Manufacturer, Standards Setting / Certification, Training Provider
Wave Soldering Machines
Wave Soldering Machines - Speedline Electrovert, Vitronics Soltec, Technical Devices, Ersa, Seho Wave Soldering Machines for sale at JMW Enterprises....
AOI - Xray - Paste Inspection
AOI - Xray - Paste Inspection - Yestech, Viscom, Omron, MVP, Cyber Optics, GSI Lumonics AOI-Xray-Paste Inspection for sale at JMW Enterprises....
Selective Soldering Machines
Selective Soldering Machines - Pillarhouse, Vitronics Soltec, ERSA, A.C.E. Production Technologies Selective Soldering Machines for sale at JMW Enterprises....
SMT Spare Parts
SMT Spare Parts - Electrovert, DEK, MPM SMT Spare Parts for sale at JMW Enterprises....
Through Hole Machines
Through Hole Machines - Universal, Amistar Through Hole Machines for sale at JMW Enterprises....
SMT Placement Machines
SMT Placement Machines - Fuji, Mydata, Universal SMT Placement Machines for sale at JMW Enterprises....
Batch - Inline - Stencil Cleaners
Batch - Inline - Stencil Cleaners - Speedline Electrovert, Trek, Stoelting, Unit Design, Aqueous Technologies, EMC, Smart Sonic Batch-Inline-Stencil Cleaners for sale at JMW Enterprises...
SMT Conveyors
SMT Conveyors - Conveyor Technologies, JOT, Simplimatic, ASYS, Flexlink SMT Conveyors for sale at JMW Enterprises....
SMT Feeders
SMT Feeders - Fuji, Siemens, Hover Davis, Mydata SMT Feeders for sale at JMW Enterprises....
Reflow Ovens
Reflow Ovens - BTU, Electrovert, Heller, Vitronics Soltec Reflow Ovens for sale at JMW Enterprises....
PCB Magazines
PCB Magazines - CAB, NIX, Simplimatic PCB Magazines for sale at JMW Enterprises....
Rework Stations
Rework Stations - Air Vac, SRT, Pace, Metcal, Conceptronic Rework Stations for sale at JMW Enterprises....
Parts Prep - Wire Strippers
Parts Prep - Wire Strippers - Hepco, GPD, Heller, Eubanks, Vtek Parts Prep-Wire Strippers for sale at JMW Enterprises....
SMT Adhesive Dispensers
SMT Adhesive Dispensers - Camalot, Nordson, Asymtek SMT Adhesive Dispensers for sale at JMW Enterprises....
Used SMT Screen Printers
SMT Screen Printers - DEK, MPM, Ekra SMT Screen Printers for sale at JMW Enterprises....
Routers - Depanelizers
Routers - Depanelizers - Cencorp, JOT Routers-Depanelizers for sale at JMW Enterprises....
Buyer, Seller, Broker of Electronic Assembly Equipment
Rushford, Minnesota, USA
Pillarhouse Jade MKII
To see more about the Jade MKII Single Point Selective Soldering System visit Pillarhouse USA at: https://www.pillarhouse.co.uk/products/selective-soldering-handload/jade-mkii-handload Entry-level, single point selective soldering system...
Pillarhouse - Entry level selective soldering The Pilot
To see more visit Pillarhouse here: https://www.pillarhouse.co.uk/products/selective-soldering-handload/pilot-handload Economical, compact, single point selective soldering system The all-new ultra-low-cost Pilot machine has be...
Pillarhouse Jade MKIV
Enhanced, entry-level, single point selective soldering system With all the proven features of the Jade MKII, the Jade MKIV sets even higher standards of performance. Designed to meet the needs of the small/medium batch manufac...
Quadron (PLC)
High specification, bench top rotary table soldering machine A versatile four station rotary bench top soldering machine, ideally suited for high or low volume production, the Quadron combines well proven pumped soldering techniques with...
Pillarhouse Orissa Fusion In-Line Selective Soldering
High speed, in-line, multi-platform selective soldering system Incorporating high-speed PCB transfer, the Orissa Fusion platform offers the ultimate in flexibility, coupled with reduced line length at a lower cost compared to current mar...
Pillarhouse Orissa Synchrodex Combo
In-line or stand-alone fluxer/pre-heater This compact modular in-line system utilises the same design concept as the new generation Synchrodex soldering cell and offers the user significantly reduced process time when compared to using a...
Pillarhouse Orissa Fusion
High speed, in-line, multi-platform selective soldering system Incorporating high-speed PCB transfer, the Orissa Fusion platform offers the ultimate in flexibility, coupled with reduced line length at a lower cost compared to current mar...
Pillarhouse Jade Handex
Designed to meet the needs of lean manufacturing, the Jade Handex offers high-speed flexible throughput at minimal cost. The Jade Handex is equipped with a revolutionary twin PCB rotary table transport system to allow simultaneous load/unl...
PillarPAD
An offline process programming system Allows easy creation of flux, pre-heat and solder joints and baths Produces graphical representations of the PCB Solder nozzles shown as actual size Uses industry...
Pillarhouse Orissa Fusion
High speed, in-line, multi-platform selective soldering system Incorporating high-speed PCB transfer, the Orissa Fusion platform offers the ultimate in flexibility, coupled with reduced line length at a lower cost compared to current mar...
Pillarhouse PillarGEN 30/40/80 Nitrogen Generator
Cost effective Nitrogen generating systems The PillarGEN Nitrogen generation system has been specifically designed to meet the Nitrogen supply requirements of the current range of Pillarhouse selective soldering systems. The latest...
Selective soldering machine - Entry level
Entry-level, single point selective soldering system Designed to meet the needs of the small/medium batch manufacturer who requires high levels of production flexibility, the Jade MKll entry-level system offers uncompromised selective so...
Pillarhouse Quadron (PLC)
High specification, bench top rotary table soldering machine A versatile four station rotary bench top soldering machine, ideally suited for high or low volume production, the Quadron combines well proven pumped soldering techniques with...
Pillarhouse Orissa Synchrodex Pro
Enhanced, flexible, in-line, modular selective soldering system Designed as a modular system, the Synchrodex Pro range of in-line equipment offers the ultimate in flexibility with the ability to upgrade to high-speed throughput when mult...
PillarDOT
Simple drop-jet fluid deposition system The Pillarhouse Drop-Jet head can be used to spray fluids at any angle in either upward or downward directions. With its patented easy bleed and cleaning feature it is ideal for automation...
Pillarhouse Jade Pro
Ultra-flexible, offline, multi-platform selective soldering system Designed to meet the needs of the small batch manufacturer who requires high levels of production flexibility. The Jade Pro offers the ability to regularly change solder...
Smart Factory 1.0
Smart Factory 1.0 The Pillarhouse Smart Factory 1.0 implementation allows a customer to monitor the performance of all their Pillarhouse Selective Soldering Systems. This can be across a single production line, a production facili...
Pillarhouse Orissa Synchrodex
Flexible, in-line, modular selective soldering system Designed as a modular system, the Synchrodex range of in-line equipment offers the ultimate in flexibility with the ability to upgrade to high speed throughput when multiple modules a...
Pillarhouse Jade Prodex
Ultra-flexible, offline, multi-platform, quick load twin PCB rotary table selective soldering system Designed to meet the needs of the small batch manufacturer who requires high levels of production flexibility. The Jade Prodex offers th...
Barcodes and Board Traceability
Barcodes and Board Traceability Allows automatic process program selection and board traceability, both locally and remotely. Notes Currently supported barcode readers include: Symbol – DS6700, LS2208...
Global OEM manufacturer of selective wave soldering machines. With a world-wide install base in over 65 countries, we are a global leader in the selective soldering space. Highly customized solutions available in all industries.
Elk Grove Village, Illinois, USA
Equipment Dealer / Broker / Auctions, Manufacturer, Manufacturer's Representative, Training Provider
Printed Circuit Board Assembly Services, PCBA factory, PCB assembly service -- Hitech Circuits Co., Limited
Hitechpcb is an expert PCB manufacturing & assembly company that proudly supplies PCB assembly solutions to businesses of all sizes in China.Our industry-leading PCB assembly processes create PCBs of the highest quality. Our expert team...
Rigid-flex PCB, Rigid flex circuit board manufacturer, Flex rigid PCB -- Hitech Circuits Co., Limited
Rigid flex printed circuit boards (PCBs) are manufactured by combining rigid and flexible board technologies. These circuit boards are made up of multiple flexible circuit inner layers. An epoxy pre-preg bonding film is used to attach together the...
Heavy copper pcb board, Heavy copper printed circuit board, Copper PCB -- Hitech Circuits Co., Limited
Hitech is a professional heavy copper pcb, thick copper pcb board manufacturer, PCB power supplier from China, we have been associated with heavy copper pcb plating since 2000 and we have won good reputation in this ind...
PCB Assembly, PCB Manufacturing, Electronic Assembly service -- Hitech Circuits Co., Limited
As leading one-stop PCB Assembly services provider in China, Hitech Group offers high quality, cost effective, express PCB board products and provides PCB manufacturing, electronics assembly manufacturing, components sourcing, Box build...
Aluminium PCB, MCPCB, Aluminum PCB, Metal core PCB, LED PCB, LED Circuit board
Aluminum PCB, or Aluminium PCB, also called Alu PCB, is one of Insulated Metal Substrate (IMS) PCBs, and is also one of the most commonly used Metal Core PCBs (MCPCB) nowadays. HitechPCB manufactures Aluminum printed circuit boards (PCB) with...
LED PCB Assembly
Hitech Circuits has been participated in hundreds and thousands of LED lighting projects, by providing LED PCB and also LED PCB assembly service. Our LED PCB assembly had covered both ends of the Lighting Class LED size spectrum,...
Rogers PCB, RF PCB, High frequency PCB
Choosing the appropriate material for your printed circuit board is a crucial decision that will impact its suitability for specific applications. Through this blog post, we aim to enhance your understanding of Rogers PCBs. If you require fur...
Electronic Manufacturing Services -- Hitech Circuits Co., Limited
Hitech Circuits has always been focused on electronic manufacturing services for over 15 years with much experience for design and production in the PCBA field. We provide one-stop services, including SMT mounting, plug-in (THT), electro...
Flexible PCB, FPCB, Flexible Circuit board -- Hitech Circuits Co., Limited
Flexible PCB includes single sided FPC, double sided FPC and multilayer FPC, etc. Single FPC has chemically etched conductive pattern layer, the conductive pattern layer on the surface of the flexible insulating substrate is calendered copper foil...
IGBG Ceramic PCB, Ceramic circuit board, Alumina (Al2O3) Ceramic PCB, Aluminum Nitride (AIN) Ceramic PCB board -- Hitechpcb
We are a professional ceramic pcb manufacturer, supplier from China, we mainly supply high quality Alumina (Al2O3) Ceramic PCB, Aluminum Nitride (AIN) Ceramic PCB board and IGBT Ceramic PCB. Our ceramic printed circuit boards features of high pres...
Aluminum PCB; Metal Core PCB; LED PCB Circuit board -- Hitech Circuits Co., Limited
Aluminum PCB & Metal Core PCB & LED PCB Circuit board Aluminium PCB are metal-based, copper-clad laminates with a good heat dissipation function. Usually, Aluminium PCB is refer to LED PCB board, which is the...
Turnkey PCB Assembly Manufacturer, PCBA, SMT Assembly, THT Assembly -- Hitech Circuits Co., Limited
Turnkey PCB assembly & manufacturing is the optimal solution for engineers with urgent, high complexity projects who want to avoid project management headaches. Providing turnkey PCB assembly services means that the provi...
RF PCB & Microwave PCB, Teflon PCB, Rogers circuit board -- HitechPCB
HITECH CIRCUITS has been providing RF PCB manufacturing facilities for years. The qualified professionals at HITECH CIRCUITS have expertise in Rogers PCB materials based PCB manufacturing. Fortunately, HITECH CIRCUITS has experienced RF Microwave...
HDI PCB, High density PCB, High density interconnect PCB, HDI PCB Manufacturing -- Hitechpcba
HDI PCB Manufacturer & Assembly – One-stop services from China -HDI (high-density interconnection board) is a compact circuit board designed for small capacity users. Compared...
Ceramic PCB, Ceramic PCB board, Ceramic substrate PCB, ceramic circuit board
Ceramic PCB board is also called ceramic substrate or ceramic circuit board, ceramic copper coated plate, ceramic substrate refers to the copper foil directly bonded to alumina (Al2O3) or aluminum nitride (AlN) ceramic substrate or other cera...
Heavy Copper PCB, Thick copper PCB, PCB fabrication -- Hitech Circuits Co., Limited
Heavy Copper PCBs have a lot to offer. It has some unique features that make it ideal for high-end applications. Let's discuss some of the benefits of this PCB; • Great heat distribution: This PCB provides high thermal resistance due t...
Hitechpcba is a wоrld-lеаding PCB Manufacturing & PCB Assembly company with more than 20 years experience in the electronics manufacturing industry. We focus on Circuit board fabrication, PCB assembly, electronic parts sourcing.
Shenzhen, China
Counterfeit Components Workshop
In cooperation and partnership with IDEA, this course provides a basic introduction to Counterfeit Mitigation as well as an introduction to IDEA-STD-1010, including training in methods for the visual detection of counterfeit and substandard...
IDEA-STD-1010 Essentials
In cooperation and partnership with IDEA, IDEA-STD-1010 Essentials is designed to develop an in-depth knowledge of the IDEA-STD-1010 “Acceptability of Electronic Components Distributed in the Open Market” standard and a t...
IPC-6012 Specialist (CIS) Certification Training Course
If you are looking for a comprehensive program that will develop your understanding of design, specifications, fabrication and inspection of printed circuit boards (PCBs), this is the certification for you. The IPC-6012 “Qualificat...
IPC Designer Certification
The IPC Designer Certification or CID (Certified Interconnect Designer) is the industry’s premier professional development program directly focused on PCB design philosophy and requirements. If your passion is the transformation of electrica...
IPC-A-600 Instructor (CIT) - Training and Certification
Bare Board Inspection Training This 3-day, lectured course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection....
IPC-A-620 Standard Expert (CSE) Certification Training Course
If you are looking at becoming a subject matter expert in IPC/WHMA-A-620, “Requirements and Acceptance for Cable and Wire Harness Assemblies” without the need to provide any IPC Certification to others, then this is the p...
IPC-7711/7721 Specialist (CIS) - Training and Certification
Component Rework/Board Repair Training This is a 5-day, advanced course for anyone responsible for quality and reliability of reworked or repaired electronic assemblies. It is a comprehensive hands-on training program w...
IPC-6012 Instructor (CIT) Certification Training Course
If you are looking for a comprehensive program that will develop your understanding of design, specifications, fabrication and inspection of printed circuit boards (PCBs), this is the certification for you. The IPC-6012 “Qualificat...
IPC J-STD-001 Standard Expert (CSE) Certification Training Course
If you are looking at becoming a subject matter expert in J-STD-001, “Requirements for Soldered Electrical & Electronic Assemblies” without the need to provide any IPC Certification to others, then this is the pro...
J-STD-001 Instructor (CIT) - Training and Certification
This is a combination lectured and hands-on course covering the information in the IPC J-STD-001 document. The J-STD-001, “Requirements for Soldered Electrical & Electronic Assemblies”...
Component Identification Training
Learn to identify (with the use of aids, visuals or actual components) packaging types of the most commonly used through-hole and surface mount components, interconnections and hardware used in electronic assembly. This course also covers co...
IPC-A-610 Specialist (CIS) - Training and Certification
This 3-day, lectured course utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production–in both lead and lead-free. The IPC-A...
J-STD-001 Aerospace Addendum - Training and Certification
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal c...
IPC-A-610 Instructor (CIT) - Training and Certification
This 4-day, lectured course utilizes the images in the IPC-A-610 document to provide visual accept/reject criteria examples for all three classes of assembly production–for both lead and lead-free. The IPC-A-610, “The Acc...
IPC Advance Design Certification
Continuing the educational series for PCB Design, the IPC Advanced Designer Certification or CID+ (Advanced Certified Interconnect Designer) is the ultimate professional industry certification for a designer looking to obtain what we would c...
Advanced Micro SMT Hand Soldering
If you are working with the smallest of small, surface mount components in either placement or rework of, this is the course for you. This two (2) day Advanced Surface Mount Micro Hand Soldering program focuses on the pro...
IPC-A-620 Instructor (CIT) - Training and Certification
Cable Wire Harness Assemblies Training This 4-day, lectured course is a comprehensive, instructor-level certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembl...
IPC-A-610 Standard Expert (CSE) Certification Training Course
If you are looking at becoming a subject matter expert in IPC-A-610, “The Acceptability of Electronic Assemblies” without the need to provide any IPC Certification to others, then this is the program for you. &...
IPC-7711/7721 Standard Expert (CSE) Certification Training Course
If you are looking at becoming a subject matter expert in IPC-7711/21, “Rework, Modification and Repair of Electronic Assemblies” without the need to provide any IPC Certification to others, then this is the program for y...
Interactive Inspection Lab
This is a 1-day course utilizing lectures, visual acuity exercises, and physical assemblies to provide the students with an experience in visually inspecting printed circuit assemblies. Knowledge base programs identify di...
EPTAC is an internationally recognized solder training and IPC certification corporation, giving professionals the skills to accelerate their careers, and businesses the talent to succeed.
Manchester, New Hampshire, USA
Search Engine Optimization (SEO)
Search engine optimization services for companies involved with electronics manufacturing. Experience in multiple languages and geographies. Let us show you how to optimize your online efforts by using your own website in conju...
SMTnet Marketing Optimization
Make the most out of your SMTnet promotion! Ready to start seeing more visitors from SMTnet? We'll help you do just that. An SMTnet Marketing Program is available to help companies of every size. ...
SEO 1A provides internet marketing services for manufacturers, sales reps, distributors, & service providers. These services span a wide range of options, catering to companies of all sizes. Experts at optimizing SMTnet promo!
Poland, Maine, USA
Consultant / Service Provider, Events Organizer, Marketing Agency, Media / Publisher / Online Resource, Other
PCB Routers and Depanelers
Cencorp, PMJ, Fancort, IPTE View our inventory online or call us at 978-790-2774...
PC Board Cleaners and Washes
Aqueous Technologies Batch Cleaners, SCS Ionograph, Aquastorm 100 and 200, Smartsonic, Alpha Metals, Speedline, Electrovert, Technical Devices, Austin American, Unit Design, Westkleen, ECD View our inventory online or call us at 978-790-27...
Semiconductor Equipment
Front End and Back End Yaskawa Wafer Robots, Ebara Pumps, Boc Edwards Pumps, Affinity Chillers, ASM, Karl Suss, Agilent, Tencor, EVG, GSI, ESEC, Besi, Kulicke and Soffa, K&S, MRSI, Temptronic &...
Environmental Chambers and Ovens
Thermotron, Grieve, Envirotronics, Blue M, Despatch, Test Equity, Tenney, Cincinnati Sub Zero, Espec, CSZ View our inventory online or call us at 978-790-2774...
Dispensers
Camalot XyflexPro+ FXD 8000 Prodigy, Asymtek Spectrum 910 920, PVA, MRSI View our inventory online or call us at 978-790-2774...
Pick and Place Machines
Univeral, FUJI, Mydata, Siemens, Europlacer, Philips, Assembleon, Contact Systems View our inventory online or call us at 978-790-2774...
Reflow Ovens
Heller, BTU, Vitronics, Electrovert Reflow Ovens View our inventory online or call us at 978-790-2774...
Stencil Printers
MPM, DEK, EKRA, FUJI Stencil Printers View our inventory online or call us at 978-790-2774...
Tyco Press
Tyco Press 3 Tons BMEP-3T, 5 Tons BMEP-5T, 6 Tons MEP-6T, 12 Tons MEP-12T, AEP-12T View our inventory online or call us at 978-790-2774...
Rotary Screw Air Compresors
Kaeser, Sullair, Gardner Denver, Atlas Copco, Quincy, Wilkerson and Zeks Air Dryers View our inventory online or call us at 978-790-2774...
AOI PC Board Inspection
Vi Technology, Mirtec, Orbotech, Omron, CR Technology, MVP, Cyberoptics, Photon Dynamics View our inventory online or call us at 978-790-2774...
Air Cooled and Water Cooled Chillers
Affinity, Lytron, Triple Loop Chiller CWA-300, Boc Edwards, Advantage, CSZ, Carrier, Koolant Koolers, Filtrine, Neslab, SMC, Thermal Care, Temptek View our inventory online or call us at 978-790-2774...
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Middleton, Massachusetts, USA
Thermal Transfer, Thermal Interface Materials
We are well versed in the following thermal application materials: Sil-Pad thermally conductive insulators Gap-Pad thermally conductive gap filling material ...
Laser Cutting Services
Our Preco FlexPro CNC laser cutting system provides the speed of galvanometer processing with all the versatility of an XY motion system. Orion has the capability to cut detailed parts more precisely, and with shorter lead-times than conventional...
Die Cutting, Stamping
Orion has high-speed die cutting presses ranging from 1 to 60 tons. We also have stamping presses that range from 1 to 60 tons. Our other Die cutting capabilities include: Production parts up to 60&qu...
CNC Routed Plastics, Electronic Insulation Products
Through the process of CNC routing, we are able to cut with precision electronic insulation products including thicker gauge materials. We also process composite materials such as G-10, FR4 and other materials that are not easily...
Waterjet Cutting
Waterjet allows for improved cutting tolerances, improved lead times and the ability to provide highly complex geometry. Using a stream of water with forces of 55,000 PSI yields fast production rates and tool free cutting. Our single hea...
EMI/RFI Shielding Laminates
To shield against emissions, there must be a barrier of an electrical conductive material. Shielding laminates provide an economical and effective solution to this problem. Most of our materials consist of a metal foil (usually, copper o...
Heavy Gauge Electrical Insulation
ORION has emerged as a leader in the fabrication of heavy gauge electrical insulation products. We route many materials such as TW Formex®, Statex®, GE's Lexan®, and acrylics. Their typical thicknesses is between 0.060" and 0.25&...
Formed Plastics Products
Formed parts are used for electrical insulation, such as snap-in-place housings, protection of high voltage parts, or covering bus bars. Plastics Forming Methods: Heated line bending...
Filters and Screens
Orion provides flexible, polyurethane filter foam to remove dust and contaminating particles from the air, gases and liquids in a variety of applications. The open pore skeletal structure provides low air resistance ideal for use in computers, ele...
Gaskets and Seals
Orion Industries Inc has over 35 years experience in the design and manufacture of high performance gaskets and seals. We fabricate parts from open cell sponge, closed cell sponge, and solid, dense gasketing materials. We also manufactur...
ORION provides innovative solutions to our customers' EMI/RFI Shielding, Insulating, Screening and Sealing needs in a broad spectrum of manufacturing environments.
Ayer, Massachusetts, USA
XT Humidifier
XT Series electrode humidifiers provide humidification for a wide range of buildings, including health care, commercial, industrial, and government facilities. Easy installation and cylinder replacement together with minimal maintenance make XT Serie...
Adiatec® Ultrasonic Humidifier
The DriSteem Adiatec ultrasonic humidifier provides evaporative cooling and humidification in room or in AHU/duct for application flexibility. Ultrasonic units humidify using high frequency oscillation of piezoelectric transducers, causing mist to...
GTS® Humidifier LX Series
The GTS humidifier LX Series is the only gas-fired humidifier that combines the highest efficiency on the market with ultra-low NOx in a single design. Thermal (combustion) efficiency 94% Higher Heating Value (...
CDS dehumidifier RL series
DriSteem is introducing a brand-new selection of refrigerant-based dehumidifiers available to ship within 5 business days or less. These units are an excellent fit for commercial applications and replacement opportunities. Dehumidification...
Hydrotrue® RO 400 Series Water Treatment System
Hydrotrue® RO 400 series water treatment system Designed for DriSteem equipment and stand-alone operation, the Hydrotrue RO 400 Series reverse osmosis water treatment system significantly reduc...
Hydrotrue® Pre-treatment Systems
Hydrotrue water softener systems The easiest and most cost-effective way to maintain humidification capacity and to reduce maintenance requirements is to install a Hydrotrue water softener system. Operating with...
Hydrotrue® RO 200 Series Water Treatment System
Hydrotrue® RO 200 series water treatment system Designed for DriSteem equipment and stand-alone operation, the Hydrotrue RO 200 series reverse osmosis water treatment system...
DriSteem provides reliable and efficient humidity control, evaporative cooling, and water treatment solutions for commercial and industrial applications.
Eden Prairie, Minnesota, USA
PICO II Pick&Place machine
New PICO II pick&place machine now available Media Input : Bulk Bowl feeder or Tube feeder Media Output : Tape & reel Vision inpsection UPH : up to 8'000 parts&...
LISA Modular Handling System
Compact designed machines to match perfectly different kind of modular operation process Key configuration : Tray in - Tray out Tray...
Automatic Tape & Reel
Automatic tape & reel equipment - manual tape and reel - fully automatic tape and reel including vision inspection...
TFA - Automatic Tube Feeder (TFA)
TFA - Automtatic Tube Feeder (TFA) • Basic module for 1 type of component • Cycle time : 1,5 seconds (1up feed) • Mounted on...
ARC Automatic Reel Changer
Ready for Industry 4.0 ARC - Fully Automatic Reel Changer Stand alone module to be integrated on any Tape&Reel machine output Option : Automatic Sticker labelling Option...
MB872 Tape & Reel Module For Any Type of SMD Components
Reel input : Diam. 180 / 330 / 380 / 560 / 760mm (7 / 13 / 15 / 22 / 30 inches) Reel output : Diam. 180 / 330 / 380 / 560 (13 / 15 / 22 inches) Tape advance - stepper moto...
ARC Automatic Reel Changer V2
Our new automatic reel changer ARC V2 is now available. More compact and more economical, this new model will meet all requirements for optimizing the reeling process. Reel labeling and boxing with a flexi...
Connector vision inspection machine
Connector vision inspection machines 2D - 3D integration Coplanarity inspection Tube or tray input Tape and reel output...
AATEC LISA SPIDER XL
Our new LISA SPIDER XL pick & place machine is now available. Greater modularity More space for input / output medias - Trays IN /OUT - Tape IN - Tape OUT - Tubes IN /OUT...
LEVIO Contactless Touchless Pick and Place
Contactless touchless manipulation, no more contact and surface defects Flexible, easy to use, menu driven software, advanced mechanic and electronic characteristics, fully contactless manipulation capabilities....
ATF - Automatic Tray Feeder
ATF - Automatic Tray Feeder Flexible, easy to use, advanced mechanic...
ARC - Automatic Reel Changer
Automatic Reel Changer - ARC Flexible, easy to use, menu driven software and...
Tape & Reel Material
We supply the following material for tape & reel equipment : Pocket tape Cover tape Reels (all dimensions)...
PICO Modular Pick and Place System For Tape and Reel Packaging
Modular automatic pick and place machine featuring tape and reel module, bowl feeder and tube feeeder. Ergonomic, easy access, economic and easy to use Our standard input and output modules can be located all around the...
High Precision Mechanical Parts Manufacturing And Precision Dies
Milling Turning Grinding Honing EDM Wire cutting Heat Treatment Machining...
NANO Pick & Place Modular Handling System
This machine is especially designed for multifunction operations Key configuration: Tray in - Tray out Tray in - Tape out &...
Tape & Reel Services For Standard or Non Standard SMD Components
We offer tape and reel packaging services for standard or non standard SMD components. We provide as well customized carrier tapes for special components designed at our customers specifications...
Tube Feeder Module For Any Type of SMD Components in Plastic Tubes
Basic module for 1 type of component Easy changeover kit for tube loader (1 for each component type) Tube height adjustable thanks to precision screw Maximum heig...
3D inspection machine
Compact designed machines to match perfectly different kind of modular operation process Key configuration : Tray in - Tray out...
Modular pick and place automation - tape and reel - tube feeder - coplanarity check - assembly machine - contactless pick and place
St.Blaise, Switzerland
used smt and semi machines buy and resell
used smt and THT , Semi machines buy and resell ...
HongCheng import & Export co.,Ltd
Buy and selling used smt,semi, Robot ,CNC and all used machines
Dongguan, Guangdong, China
ISVI Razor High-Resolution Industrial Cameras, CMOS, 5120x5120, 4.5 pixel size
The RAZOR series cameras incorporate the most popular sensor resolutions with the ultimate in image performance, frame rates and economy. With scalable 1, 2 or 4 output links, RAZOR...
CoaXPress High Resolution Industrial Cameras
The CoaXPress series cameras operate 72fps with ZERO-ROT function at 8bit/10bit CXP-6 4CH It provides advanced technology of vision solution Sensor : 25MP Color & Mono CMOS Sensor (Global & Rolling Shutter)...
CameraLink High Resolution Industrial Cameras
The CameraLink industrial digital cameras offer high performance in a very small footprint. The advanced 25M color CMOS sensor provides the absolute best image quality at an incredible frame rate of 30 fps! The camera Link Interface ensures High s...
ISVI - Industrial Sensor Vision International Corporation
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
Oxford, Connecticut, USA
Mirae Pick and Place
Lewis and Clark is the industry leader in pre-owned Mirae Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your preowned Mirae Feeder needs and Feeder repairs~...
Nordson Asymtek Conformal Coating Systems
Lewis and Clark, Inc. offers the largest variety of pre-owned Nordson Asymtek Conformal Coating Systems Looking to sell your conformal coater? Let us know! Lewis and Clark is always looking t...
Glenbrook Test Equipment
Glenbrook test equipment for sale, X-ray equipment....
Panasonic Pick and Place
Lewis and Clark is the industry leader in pre-owned Panasonic Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your preowned Panasonic Feeder needs and Feeder repairs~...
Nordson-Yestech
Lewis and Clark, Inc. offers the high quality pre-owned Nordson Yestech AOI systems....
MVP AOI
Lewis and Clark, Inc. has the largest pre-owned inventory of MVP AOI systems....
BTU Reflow Oven
Lewis and Clark, Inc. offers the largest inventory of pre-owned BTU Reflow ovens. Ready to sell your BTU Reflow Oven? Let us know! We are ready to buy~...
EKRA Screen Printers
Lewis and Clark, Inc. carries the largest inventory of pre-owned EKRA screen printers. Ready to sell yours? Let us know, we are ready to buy~...
Mirtec AOI
Lewis and Clark, Inc. offers the largest variety of pre-owned Mirtec AOI systems....
Heller Reflow Ovens
Lewis and Clark's carries the largest inventory of pre-owned Heller Reflow Ovens! Ready to sell your Heller Reflow oven? Let us know! We are always looking to buy~...
PVA Conformal Coating Sytems
Lewis and Clark, Inc. offer the largest variety of PVA conformal coating equipment. Ready to sell your PVA conformal coating machine? Just let us know, we are ready to buy!...
Speedline MPM Screen Printers
Lewis and Clark, Inc. home to the largest inventory of pre-owned Speedline MPM Screen Printers....
Fuji Pick and Place Equipment
We buy and sell a majority of all Fuji Pick and Place Machines! With our Feeder Frenzy depot dedicated to the sale of quaility pre-owned Fuji feeders and repairs...
Samsung Pick and Place
Lewis and Clark is the industry leader in pre-owned Samsung Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your Samsung Feeder needs and Feeder repairs~...
Siemens Pick and Place Equipment
Lewis and Clark is the industry leader in pre-owned Siemens Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your Siemens Feeder needs and Feeder repairs~...
Lewis and Clark is your #1 Pre-Owned Surface Mount and In-Circuit Test equipment supplier. We offer a variety of equipment solutions at a significant cost savings over new.
Nashua, New Hampshire, USA
Companion Subscription
Our companion subscription includes: Sales orders. Assemblies. Best-in-class QuickBooks integration. 2 users included. $20 each additional user. $59.95/month...
Pro Subscription
Our pro subscription includes: Advanced automation Job Costing Customer Portal 5 users included. $20 each additional user. $169.95/month DETAILED FE...
Plus Subscription
Our plus subscription includes: Unlimited locations Serial and lot tracking. Barcoding 3 users included. $20 each additional user. $119.95/month DET...
SOS Inventory
SOS Inventory is ideal for small to medium-sized manufacturers in various business sectors, including electronics, food processing, aircraft manufacturing, retail, equipment, building materials and many more. The software allows organizations to i...
SOS Inventory Software provides top-of-the-line inventory control, order management, and manufacturing for a wide variety of industries, plus integration with QBO, UPS, ShipStation, Shopify, BigCommerce, Zapier and PayPal.
Arlington, Texas, USA
고처리율 애플리케이션을 위한 세계 최고의 SMT 컨벡션 리플로우 오븐 - Mark7
뉴 MK7 플랫폼이 새롭고 획기적인 여러 디자인으로 리플로우 업계를 혁신하고 있습니다! MK7은 보다 낮은 델타 T, 질소 소비 절감 및 전체 생산 플로어의 관찰이 쉽도록 하는 새로운 저고 패키지로 PM 확장에 대한 모든 고객의 요청이 통합되어 있습니다. 생산을 위한 MK7의 강력한 장점을 직접 확인할 수 있도록 당사의 세 곳 중 어느 곳이든 방문해 프로파일을 수행하고 데이터를 수집해 보실 수...
듀얼 레인 / 이중 온도 리플로우 오븐 - 1910 MK5
듀얼 챔버 모듈 - 듀얼 챔버 + 듀얼 블로어 + 듀얼 히터 + 듀얼 T/C 두 갈래로 나뉘어진 듀얼 레인 / 이중 온도 리플로우 오븐 챔버가 동일 리플로우 오븐 풋프린트에서 2개의 다른 열 프로파일이 동시에 운행될 수 있도록 합니다. 두 갈래로 나뉘어진(듀얼) 기능...
무플럭스 리플로우 솔더링을 위한 포름산 리플로우 오븐 - 1936 MKV
포름산 증기에서의 무플럭스 포름산 리플로우 Heller는 포름산 증기를 위한 수평형 무플럭스 포름산 리플로우 오븐을 설계해 생산에 활용할 수 있도록 제작했습니다. 이 새로운 오븐은 세미(Semi) S2/S8 안전성 표준(유독가스 포함)에 적합하도록 설계되었습니다. 포름산은 무플럭스 솔더 리플로우에서 효과적인 환원제로 보여져 왔습니다...
대량 생산을 위한 컨벡션 리플로우 오븐. - 1826 Mark 5
세계 최고의 컨벡션 리플로우 오븐 대량의 요구에도 일관된 성능을 제공하는 동시에, 예방적 유지관리와 바닥면적은 최소화합니다 무납 인증! 유지관리 불필요! 최저의 질소 & 전기 사용! 무료로 제공되는 통...
1936/2043 Mark 5 – 리플로우 오븐 시스템
가장 빠른 픽앤플레이스 시스템을 제공하는 분당 1.4M의 최대 벨트 속도를 갖춘 최강의 대량 리플로우 오븐 시스템. 무납 인증! 유지관리 불필요! 최저의 질소 & 전기 사용! 무료로 제공되는 통합 Cpk 소프트웨어!...
1809 MK5 - Heller 고급 인라인 무보이드 / 진공 리플로우 솔더링 오븐
9개 존을 갖춘 무보이드 진공 리플로우 솔더링 오븐. 균형적 흐름 기술이 있는 무보이드 / 진공 리플로우 솔더링 질소 시스템 9개의 탑 및 바텀 가열 존 - 업계 최고의 직선형 피트당 최고의 존 수! 100인치 가열 길이 - 고처리율 제공! 2개의 내부...
860 가압 큐어링 오븐(PCO)
다이 어태치 및 언더필 가압 큐어링 오븐 가압 큐어링 오븐(PCO) 또는 오토클레이브는 일반적으로 다이 어태치 및 언더필 애플리케이션에서 사용되는 접착 공정에서 보이드를 최소화하고 접착강도를 증대시키기 위해 사용됩니다. PCO pressurizes air into a rigid vessel and heats & coo...
Heller VCO 755 인라인, 지속적 큐어, 수직형 포맷 미니 큐어링 오븐
큐어링 에폭시의 수직형 자동화를 위한 소형 큐어링 오븐. 생산성 향상, 품질 개선, 비용 절감은...Heller의 수직형 포맷 큐어링 솔루션과 함께. 에폭시 큐어 공정의 인라인, 수직형 자동화가 세 분야에서 즉각적이고 상당한 혜택을 제공합니다....
Heller 788 인라인, 지속적 큐어, 수직형 포맷 오븐
생산성 향상, 품질 개선, 비용 절감은...Heller의 수직형 포맷 큐어링 솔루션과 함께. 에폭시 큐어 공정의 인라인, 수직형 자동화가 세 분야에서 즉각적이고 유의미한 혜택을 제공합니다. 인라인 자동화는 배치 오븐의 적재 및 하적에 필요한 노동을 없애 생산성을 증대합니다. 이는 배치 오븐 도...
-세계 최고 품질의 대류열풍방식으로 새로운 표준을 선도하는 HELLER Reflow Oven -10년 연속 World Wide Market Share 1위와 2014 SERVICE EXCELLENCE AWARDS 수상
Kyungki-Do, Kyonggi-do, South Korea
ETA Min Size SMT Loader
ETA Min Size SMT Loader If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products....
Panasonic AM100 SMT Pick and Place Machine
Panasonic AM100 SMT Pick and Place Machine If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included allof ou...
SMT Offline X-ray X-7200
SMT Offline X-ray X-7200 Products Introduction | I.C.T Group www.smt11.com www.smtfactory.com Full SMT Factory Solution Partner SMT Offline X-ray X-7200 Introduce: I.C.T X-7200 inspection machin...
Hanwha HM520 Modular Chip Mounter
韩华HM520模块化贴片机...
Large Size SMT Automatic Welder Machine Reflow Oven
Large Size SMT Automatic Welder Machine Reflow Oven ❙ Introduce of Reflow Soldering Oven...
Good Quality Lager Size LED Strip Reflow Oven with 10 Zones
Good Quality Lager Size LED Strip Reflow Oven with 10 Zones ❙ Introduce of Reflow Soldering Oven...
Hot Air PCB Soldering Oven
Hot Air PCB Soldering Oven ❙ Introduce of Reflow Soldering Oven...
High Reliability Radiator Reflow Soldering Ovens
High Reliability Radiator Reflow Soldering Ovens ❙ Introduce of Reflow Oven&l...
I.C.T Online Laser Cutting Solution
High-precision PCB Board PCBA Online Laser Cutting Cutter Separator Machine Overview...
High-end SMT Inspection Conveyor with Light
High-end SMT Inspection Conveyor with Light If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of...
SMT Reflow Solder Oven for Soldering Components
SMT Reflow Solder Oven for Soldering Components ❙ Introduce of Reflow Soldering Oven...
Good Service SMT Stencil Printer for PCB Assembly Line
Good Service SMT Stencil Printer for PCB Assembly Line ❙ Introduce of ...
Full Hot Air Lead-Free Reflow Oven with PLC A800
Full Hot Air Lead-Free Reflow Oven With PC Temp Control System (A800) Introduce: 1, Heating system adopts ETA patent heating technology 2, The use of imported large current solid sta...
Led 8 Heating Zone Lead Free Reflow Oven
Led 8 Heating Zone Lead Free Reflow Oven ❙ Introduce of Reflow Soldering Oven...
High-end LED SMT Reflow Oven
High-end LED SMT Reflow Oven ❙ Introduce of Reflow Soldering Oven...
High Precision LED PCB Lead Free Reflow Oven Machine for Sale
High Precision LED PCB Lead Free Reflow Oven Machine for Salee ❙ Introduce of Reflow Soldering Oven...
Manual PCB V-cut Machine I.C.T-MV350
Manual PCB V-cut Machine I.C.T-MV350 ❙ Introduce of Manual PCB V-cut Machine High quality manual PCB V-cut machine, LED separator, multi blades LED separator, PCB separator, PCB depaneling m...
Samsung/ Hanwha SM482 Plus SMT Pick and Place Machine
Samsung/ Hanwha SM482 Plus SMT Pick and Place Machine If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't incl...
ETA A-Series Energy Saving Reflow Ovens
A500, A600, A800 - 5, 6 or 8 top/bottom cooling zones. Heating System: Up to eight groups of top and bottom forced hot air convection heating zones....
High-end PCB Soldering Oven
High-end PCB Soldering Oven ❙ Introduce of Reflow Soldering Oven...
I.C.T ( Dongguan ICT Technology Co., Ltd. )
I.C.T is a manufacturer from China that offers SMT, DIP, PCBA conformal coating equipment and turnkey solution.
Dongguan, Guangdong, China
ASYMTEK Products
Fluid Dispensing and Conformal Coating Solutions for Diverse Applications and Industries Nordson ASYMTEK supplies fluid dispensing and PCB conformal coating equipment that is supported by a global service network. Recognized for our...
MARCH PRODUCTS
Advanced Plasma Cleaning Systems, Solutions and Expertise for Multiple Manufacturing Industries MARCH Products is the global leader in advanced plasma surface treatment for semiconductor and electronic component manufacturi...
SELECT PRODUCTS
Selective Soldering Equipment and Solutions for Printed Circuit Board Assembly Nordson SELECT supplies selective soldering systems that are supported by a global service network. Recognized for our innovative products, we o...
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
Carlsbad, California, USA
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Odessa, Florida, USA
Top Cutting PCB Router PCB Depanelizer Machine
Stand Alone Ionizer PCB Depaneling Router Twin Tables and Top Cutting PCB Router Features: • Floor type double table cutting machine, with a speed of 100 mm / s and a positio...
15W UV Laser Economic PCB Laser Depaneling System
15W UV Laser Economic PCB Laser Depaneling System PCB Laser Depaneling System Specification: Laser solid-state UV laser...
Offline Dual Table PCB Depaneling Router with SycoTec Spindle 4025HY
Offline Dual Table PCB Depaneling Router Machine with SycoTec Spindle 4025HY PCB Depaneling Router Features: 1. Two-slide PCB Separator 2. Low stress 3. Sharp cutting edge...
2.4M Platform Aluminum LED Strip PCB Depanelizer V-cut PCB Cutting Machine
2.4M Platform Aluminum LED Strip PCB Depanelizer V-cut PCB Cutting Machine PCB Depanelizer Features: 1. Separates panels up to 0.1"...
V Groove Automatic PCB Depaneling Machine PCB Pizza Cutter
V Groove Automatic PCB Depaneling Machine PCB Pizza Cutter Automatic PCB Depaneling Machine Instroduction: Widely used in the Manufacturing Machinery Electronic Products, aerospace,...
PCBA CNC Router Machine Automatic PCB Milling Machine
PCBA CNC Router Machine Automatic PCB Milling Machine PCBA CNC Router Machine Advantages: X10 zoom-in image makes programming easier&increase the accuracy of point setting....
Multi Blade V-Cut PCB Cutting Machine LED Strip PCB Separator
Multi Blade V-Cut PCB Cutting Machine LED Strip PCB Separator V-cut PCB Cutting Machine Features: 1. It can cut many boards with multiple sets of knives work at the same tim...
LED Bench Top PCB Separator Machine Aluminum PCB Cutting Machine
LED Bench Top PCB Separator Machine For LED FR4 Aluminum PCB Boards Equipment designed to minimize board stress and avoid component damage. Three pairs of precision beveled cutting blades ensure the board does not...
Full Automatic PCB Depaneling Router Machine PCB Separator Without Fixture
Full Automatic PCB Depaneling Router Machine PCB Separator Without Fixture Our Service: 1. Lifetime technical support and 2 years warranty. 2. Free replacement or refund would be don...
PCB Laser Cutting Machine Laser Depaneling of Assembled PCBs/FPCs
PCB Laser Cutting Machine Laser Depaneling of Assembled PCBs/FPCs PCB Laser Cutting Machine Advantages: 1. No mechanical stress 2. Lower tooling costs 3. Higher quality of...
Burr Free Non-Contact PCB Laser Cutting Machine
Laser PCB Cutting Machine Function: The equipment is mainly used in the cutting 5G materials such as CCM / COB / LCP / MPI / COF / cop / pi / CPI in consumer electronics. The equipment integrates high-speed and high-p...
Auto Feeding And Loading Full Automatic V-cut PCB Depaneler
Full Automatic V-cut PCB Depaneler Introduction: This equipment can further improve the quality of depaneling. It can realize V-groove XY two-way automatic cutting, cutting aluminum & FR4 boards without burr, can...
Metal Board V-cut PCB Depaneling Machine Guillotine PCB Cutter
Metal Board V-cut PCB Depaneling Machine Guillotine PCB Cutter Features: 1. Less stress ,high cutting quality 2. Suitable for cutting all kinds of PCB material, even for Alumin...
5-Blade Precise V-groove PCB Separator Circular Blade PCB Depaneler
5-Blade Precise V-groove PCB Separator Circular Blade PCB Depaneler PCB Depanelizer Features: 1. Separates panels up to 0.1" 2. The longest panel: No lim...
Inline UV PCB Laser Depaneling Machine
Inline UV PCB Laser Depaneling Machine Inline UV PCB Laser Depaneling Instruction: PCB depaneling and singulation laser systems are gaining popularity—especially as circui...
Bottom Cutting Automatic PCB Depaneling Router Machine with 3HP Vaccum Cleaner
PCB Router Function: Used for routed PCB panel singulation with lower stress. PCB Router Advantages: Lower mechanical stress Precise tooling ...
600mm Penumatic V-groove PCB Cutter Linear Blades PCB Separator
600mm Penumatic V-groove PCB Cutter Linear Blades PCB Separator Penumatic V-groove PCB Cutter Description: In order to improve the output of printed circuit board (PCB) manufactur...
Automatic V-cut PCB Depanelizer Machine
Automatic V-cut PCB Depanelizer Machine V-cut PCB Depanelizer Application: 1. Cutting Materials: Aluminum Board, PCB Board, Soft Fiber, clean and burr-free, high speed and effec...
V Cut PCB Depaneling Aluminum Cutter Machine For LED Printed Circuit Board
V Cut PCB Depaneling Aluminum Cutter Machine For LED Printed Circuit Board LED PCB Separator Features: 1. Separates panels up to 0.1" 2. The longest panel: No limit 3....
Desktop PCB Depaneling Router Machine with Customized Fixture
Desktop PCB Depaneling Router Machine with Customized Fixture Desktop PCB Router Features: 1. Bench-top single table PCB router with speeds up to 100mm/s and positioning speeds of 500mm/s....
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Huizhou, Guangdong, China
Samsung SM Feeder car
SMT peripheral equipment mainly refers to: printing press, docking station, Mounter, reflow soldering, A...
New products of anti-static cycle car manufacturer can customize LED light board PCB circuit board special transport mute trolley
Product size: 900 * 1350 * 1260mm Product category: non standard customization Caster size: 4 inches...
3D SPI-6500 solder paste thickness gauge
Detailed introduction of 3D spi-6500 solder paste thickness gauge Product function 1. Friendly programming interface 2. Multiple measurement methods 3....
KIC 2000
Introduction of kic2000 furnace temperature tester Processing customization: Yes Brand: US KIC Model: kic2000 Measurement range: - 50-1050 (℃)...
Panasonic CM202-DS CM201-DS Chip Mounter Pick and Place Machine
Sector Specification(CM202-DS) Specification(CM201-DS) ModelNo. KXF-E24C KXF-E14C...
1.2m LED light bar special semi-automatic solder paste printing machine S1200
technical parameter Model: s1200 (special type for LED light bar) Overall dimension (L × w × h): 1650 × 620 × 1550 (mm) Platform size: 320 × 1300 (mm)...
Solder paste mixer SMT automatic solder paste mixe
Model: nstar-600 Origin: Shenzhen, China Installation mode: vertical Color classification: solder paste mixer machine + mixing knife Applicable material: solder...
Cylinder type solder paste rewarming machine can solder paste return temperature timer solder paste timing rewarming machine
Brand: NSTAR model: bacao solder paste rewarming machine Origin: Shenzhen, China Color classification: type A: 4 syringe tank + 4 can filling tank...
Panasonic NPM-W SMT machine
Model name: NPM-W Substrate size Monorail * 1 Overall installation: L50mm×W50mm ~ L750mm×W550mm...
Automatic solder paste printer GKg G9+
G9 + automatic vision printing machine is a new product for SMT high-end application field, which can perfectly meet the process requirements of 03015, 0.25pich and other fine spacing, high precision and high speed. Intro...
JUKI High -Speed Compact Modular Mounter RX-7R
Specification Model Item...
Automatic solder paste printing machine
Solder paste printing range (1) SMT technology of resistance, capacitance, inductance, diode, triode and other chip components production and processing: 01005, 0201, 04020603, 0805, 1206 and other specifications and size...
CM602 Pick and Place Machine
Features & Benefits: One platform solution for any kind of production Commonality with existing equipment Linear motor drive increases reliability and reduces maintenance Wide component capability fro...
Solder paste FIFO storage device refrigerator solder paste storage type first in first out storage rack cabine
Product material: stainless steel (internal) + steel plate baking paint Storage quantity: 36 cans of tin paste Product weight: 13kg Product size: 495 * 750 * 95mm...
PCB loader of PCB unloading machine
SMT board loading machine parameters It has the advantages of simple operation, reliable structure, excellent material selection and high quality. Product specification: weight: 65kg...
SMT hanging rack electronic factory hanging rack anti-static turnover car can be customized stainless steel tray box car
SMT peripheral equipment mainly refers to: printing press, docking station, Mounter, reflow soldering, AOI, wave soldering and other equipment. SMT peripheral technology is similar to the original hyper threading technolo...
Suction nozzle cleaning machine, automatic / SMT suction nozzle cleaning
Supply suction nozzle cleaning machine, automatic / SMT suction nozzle cleaning machine / Shenzhen manufacturer details Product Name: suction nozzle cleaning machine Product model: hn-nc207...
3D SPI-7500 solder paste thickness gauge
Detailed introduction of 3D spi-7500 solder paste thickness gauge Product function Fast programming, friendly programming interface 1. Multiple measurement methods...
SMT PCB transmission and receiving machine
Parameter name / model specification / type UL330 UL445 UL530 UL535 Supply voltagePower Supply: AC220V/50/60HZ Supply pressureAir Supply: 5kg...
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Shenzhen, Guangdong, China
Consultant / Service Provider, Equipment Dealer / Broker / Auctions, Manufacturer, Manufacturer's Representative
IPC Market Research
The Electronics Industry’s Source of Data and Insights for Smart Business Decisions. The IPC Technology Market Research Council offers members unique and customized research for the electronics assembly industry. Network with...
IPC Standards
IPC standards, the results of industry consensus and collaboration, are respected throughout the whole world. Using IPC standards allows manufacturers, customers and suppliers to speak the same language....
IPC Training & Certification
IPC's Professional Development department sponsors certification programs for acceptability of electronics assemblies; soldering; repair/rework; and acceptability of printed boards. In addition, a wide variety of video and computer based tr...
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
YAMAHA YG100R Z Motor 90K2U-0HC208
YAMAHA YG100R Z Motor 90K2U-0HC208 -9498 396 00834-P50B02002DXSM4(4)...
Automatic SMT PCB Magazine Unloader UL-M-BN
Automatic SMT PCB Magazine Unloader UL-M-BN Feature ▶Strong,firm and stable design. ▶User friendly'soft touch' LED membrance control panel or touch screen can be selected. ▶Top&bottom pneumati...
Morel vacuum loader LV-330W-TN
Board Handling - Pallets, Carriers, Fixtures
Morel vacuum loader LV-330W-TN...
Fully automatic Scraper cleaning machine-SMS-220
QYSMT / MOREL Fully automatic Scraper cleaning machine-SMS-220 1. The overall use of SUSU304 stainless steel body, anti-acid and alkali corrosion, durable. 2. It is suitable for scrapers of all automatic sold...
L typle loader LT-L-BN
L typle Magazine Loader ULF-L-TN Description This equipment is used for automatic loading or unloading of PCB Board in SMT Production line. No.of Mzgazine&nb...
PCB Depaneling Router ML-CMQ360
PCB Depaneling Router ML-CMQ360 Feature ▶The whole series is equipped with dual 16 million high-speed camera auxiliary programming system, making your programming easier and smarter. ▶The whole series is equipp...
Automatic online glue dispenser HMH830D
Automatic online glue dispenser HMH830D 1. X, Y, Z three-axis motion, accurately realize the selective spraying process of various circuit boards to avoid non-coated areas such as connectors. 2. Accurately realize the selective...
SMT Lead Free Wave Soldering Machine XMW-450
SMT Lead Free Wave Soldering Machine XMW-450 Feature ▶Comprehensive: economical and power-saving type is suitable for various lead-free and lead-free processes Intelligent: intellig...
Automatic Glue Dispenser DMD221
Automatic Glue Dispenser DMD221 Features ▶Humanized design, hand-held teaching box operation, convenient programming, easy to learn. ▶It has the functions of drawing points, lines, surfaces, ar...
Morel Router CMQ360 PCB seperator
Morel Router CMQ360 PCB seperator ...
ML-860 Two-axis plate splitter
ML-860 Two-axis plate splitter 1; Appearance size: (L)1100X(W)800X(H)1500 2; Tool size: round knife 125X30X3, 80X35X3. Straight knife 356X43.5X6 3; Tool material: imported high-speed steel 4; board size: L350X...
Automatick Ultrasonic Stencil Cleaner BMP-1200
QYSMT / MOREL Automatick Ultrasonic Stencil Cleaner BMP-1200 Features: ▶All stainless steel body: beautiful, wear resistance, corrosion resistance, acid, alkali...
ML-100 Manual PCB Separator(Hand Push Type)
ML-100 Manual PCB Separator(Hand Push Type) The ML-100 is suitable for a small number of PCB boards to be separated and does not require electricity or air pressure. The PCB is manually fed between the blades to separate...
X-Ray Component Counting Machine DS-3000
Component Counters / SMD Counters
X-Ray Component Counting Machine DS-3000 Feature It is a standout solution for ultra-fast reel components counting while providing integrity with MES, enable intelligent storage and other industrial 4.0 applications....
Morel Router CMQ360 PCB seperator
Morel Router CMQ360 PCB seperator ...
Automatic PCB Magazine Loader LD-M-BN
Automatic PCB Magazine Loader LD-M-BN Feature ▶Firm structure ▶User friendly'soft touch' LED membrance control panel/ touch screen ▶Dual clamps to secure magazine rack. ▶Empty PCB detection....
Panasonic feeder
Panasonic CM402/CM602/NPM INTELLIGENT FEEDER OTHERS SIZE FEEDERS ON STOCK: 8mm/emboss/paper tape feeder with sensor, model No.KXFW1KS5A00 12/16mm/emboss tape feeder with sensor, model No.K...
Morel ML-350CLB PCB cleaning machine
Morel ML-350CLB PCB cleaning machine...
V-Groove PCB Depaneling Machine CY-203
V-Groove PCB Depaneling Machine CY-203 Features ▶The microcontroller control the blade, operation is simple and convenient. ▶Infrared light curtain induction and protection tool double protecti...
3D X-ray Offline CT Inspection System For Semicon/Electronics Inspection--ML-MirXT-160
3D X-ray Offline CT Inspection System For Semicon/Electronics Inspection--ML-MirXT-160 Equipment overview The 3D X-ray inspection system ML-MirXT-160 is specially tailored for wafer technology, SMT, packaging inspe...
Focusing on the SMT field for more than 15 years, QYSMT has been committed to meeting the needs of customers and partners. Our mission is to provide the best solutions while helping to reduce costs and increase efficiency.
Shenzhen, Guangdong, China
NVIDIA GeForce RTX 3090 24GB FTW3 ULTRA GAMING EVGA Graphics Card
NVIDIA GeForce RTX 3090 24GB FTW3 ULTRA GAMING EVGA Graphics Card w/ Original Box. Contact Our Service below. Whats-APP : +17084065961...
Sony PlayStation 5 Video Game Console
CONTACT US DIRECTLY NOW TO ORDER WITH DISCOUNT: +17084065961 Item is original *Takes 2-3 Days express delivery after receipt of payment. 100% Guaranteed Genuine/Authentic Product100% Guaranteed Factory warranty (Internat...
We sell brand new consumer electronics such as, Mobile Phones, Computer Related Items, Consoles, Video Games Consoles, Miners, Graphic Cards, PlayStation and Apple Mobiles. Serving you better is our major concern.
memphis, Tennessee,
Equipment Dealer / Broker / Auctions, Marketing Agency, Other
GE Fanuc VersaMax Analog Input Module
GE FANUC GE Fanuc provides automation hardware and software designed to help consumers minimise costs, increase performance and maximise profitability. With technologies and services catering...
Yokogawa Digital Lux Meter
YOKOGAWA Co-innovating Tomorrow Your professional Industrial Automation and Test and Measurement solutions provider since 1915. Combining superior technol...
ABB DC532 Digital Input/Output Module
ABB ABB is a leading global engineering company that drives the transformation of society and industry to a more prosperous, sustainable future. By linking software to its portfolio of electri...
https://www.quicktimeonline.com/190001-01-01-01-01
BENTLY NEVADA Bently Nevada name had been synonymous with machinery protection and condition monitoring for more than 50 years. Their network of global experts is dedicated to help customers s...
Rosemount 0185 Thermocouple
ROSEMOUNT Delivering the broadest range of measurement and analytical technologies for process clarity and insight. The tireless pursuit of inn...
MTL Analogue Multiplexer Receiver
MTL HART CONNECTION UNIT DESCRIPTION: MTL Controlling, operating and protecting assets in harsh and hazardous areas MTL p...
E+H Liquisys M COM223
ENDRESS+HAUSER (E+H) Endress+Hauser is a leading supplier of products, solutions and services for industrial process measurement and automation. Their field instruments use different...
Expertixis Corporation Limited
The industries we serve include Oil & Gas, Chemical, Petrochemical, Mining, Energy & Utilities, Pharmaceuticals, Electronics, Food and etc.
Wanchai, Hong Kong
Container Haulage
Dear Sir/Madam We are one of the pioneer logistic operators providing cross border trucking services covering the routes to & fro Penang/ Singapore and Penang/Bangkok Transocean Group of Companies and listed at the stock e...
Trucking
Dear Sir/Madam We are one of the pioneer logistic operators providing cross border trucking services covering the routes to & fro Penang/ Singapore and Penang/Bangkok Transocean Group of Companies and listed at the stock e...
Dear Sir/Madam We are one of the pioneer logistic operators providing cross border trucking services covering the routes to & fro Penang/ Singapore and Penang/Bangkok Transocean Group of Companies.
Butterworth, Malaysia